Log загрузки Android

Лог загрузки системы

= > boot

[1148.338]Starting kernel ...

[1148.340]mmc 2 not find, so not exit

Booting Linux on physical CPU 0x0

Linux version 4.9.170 (test@test) (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) ) #61 SMP PREEMPT Wed Aug 25 17: 06: 18 CST 2021

Boot CPU: AArch64 Processor [410fd034]

bootconsole [earlycon0] enabled

disp reserve base 0x7bf2d740 , size 0x384000

cma: Reserved 64 MiB at 0x0000000077c00000

On node 0 totalpages: 262144

DMA zone: 4096 pages used for memmap

DMA zone: 0 pages reserved

DMA zone: 262144 pages, LIFO batch: 31

psci: probing for conduit method from DT.

psci: PSCIv1.0 detected in firmware.

psci: Using standard PSCI v0.2 function IDs

psci: Trusted OS migration not required

psci: SMC Calling Convention v1.0

percpu: Embedded 22 pages/cpu @ffffffc03feff000 s49280 r8192 d32640 u90112

pcpu-alloc: s49280 r8192 d32640 u90112 alloc= 22*4096

pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3

Detected VIPT I-cache on CPU0

CPU features: enabling workaround for ARM erratum 845719

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 258048

Kernel command line: earlyprintk= sunxi-uart, 0x05000000 initcall_debug= 0 console= ttyS0, 115200 loglevel= 8 root= /dev/mmcblk0p4 rootwait init= /init partitions= bootloader@mmcblk0p1: env@mmcblk0p2: boot@mmcblk0p3: super@mmcblk0p4: misc@mmcblk0p5: recovery@mmcblk0p6: cache@mmcblk0p7: vbmeta@mmcblk0p8: vbmeta_system@mmcblk0p9: vbmeta_vendor@mmcblk0p10: metadata@mmcblk0p11: private@mmcblk0p12: frp@mmcblk0p13: empty@mmcblk0p14: media_data@mmcblk0p15: Reserve0@mmcblk0p16: UDISK@mmcblk0p17 cma= 64M snum= 9c00141511d0481230e mac_addr= wifi_mac= bt_mac= selinux= 0 specialstr= gpt= 1 androidboot.mode= normal androidboot.serialno= 9c00141511d0481230e androidboot.hardware= sun50iw9p1 boot_type= 1 androidboot.boot_type= 1 androidboot.secure_os_exist= 0 gpt= 1 uboot_message= 2018.05(10/22/2020-17: 24: 26) disp_reserve= 3686400, 0x7bf2d740 bootreason= unknow selinux= 1 androidboot.selinux= enforcing androidboot.dtbo_idx= 0, 1, 2 buildvariant= eng

log_buf_len individual max cpu contribution: 131072 bytes

log_buf_len total cpu_extra contributions: 393216 bytes

log_buf_len min size: 131072 bytes

log_buf_len: 524288 bytes

early log buf free: 128620(98%)

PID hash table entries: 4096 (order: 3, 32768 bytes)

Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)

Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)

Memory: 923928K/1048576K available (10110K kernel code, 1330K rwdata, 3888K rodata, 2752K init, 624K bss, 59112K reserved, 65536K cma-reserved)

Virtual kernel memory layout:

modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)

vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)

.text : 0xffffff8008080000 - 0xffffff8008a60000 ( 10112 KB)

.rodata : 0xffffff8008a60000 - 0xffffff8008e30000 ( 3904 KB)

.init : 0xffffff8008e30000 - 0xffffff80090e0000 ( 2752 KB)

.data : 0xffffff80090e0000 - 0xffffff800922c808 ( 1331 KB)

.bss : 0xffffff800922c808 - 0xffffff80092c89d8 ( 625 KB)

fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)

PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)

vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)

0xffffffbf00000000 - 0xffffffbf01000000 ( 16 MB actual)

memory : 0xffffffc000000000 - 0xffffffc040000000 ( 1024 MB)

SLUB: HWalign= 64, Order= 0-3, MinObjects= 0, CPUs= 4, Nodes= 1

Preemptible hierarchical RCU implementation.

Build-time adjustment of leaf fanout to 64.

NR_IRQS: 64 nr_irqs: 64 0

clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns

arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (virt).

clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns

sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns

Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj= 80000)

pid_max: default: 32768 minimum: 301

Security Framework initialized

SELinux: Initializing.

SELinux: Starting in permissive mode

Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)

Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)

sched-energy: CPU device node has no sched-energy-costs

Invalid sched_group_energy for CPU0

CPU0: update cpu_capacity 1024

ASID allocator initialised with 32768 entries

BOOTEVENT: 92.534541: ON

Detected VIPT I-cache on CPU1

Invalid sched_group_energy for CPU1

CPU1: update cpu_capacity 1024

CPU1: Booted secondary processor [410fd034]

Detected VIPT I-cache on CPU2

Invalid sched_group_energy for CPU2

CPU2: update cpu_capacity 1024

CPU2: Booted secondary processor [410fd034]

Detected VIPT I-cache on CPU3

Invalid sched_group_energy for CPU3

CPU3: update cpu_capacity 1024

CPU3: Booted secondary processor [410fd034]

Brought up 4 CPUs

SMP: Total of 4 processors activated.

CPU features: detected feature: 32-bit EL0 Support

CPU features: detected feature: Kernel page table isolation (KPTI)

CPU: All CPU(s) started at EL1

alternatives: patching kernel code

Invalid sched_group_energy for CPU3

CPU3: update max cpu_capacity 1024

Invalid sched_group_energy for Cluster3

Invalid sched_group_energy for CPU2

Invalid sched_group_energy for Cluster2

Invalid sched_group_energy for CPU1

Invalid sched_group_energy for Cluster1

Invalid sched_group_energy for CPU0

Invalid sched_group_energy for Cluster0

CPU1: update max cpu_capacity 1024

devtmpfs: initialized

clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns

futex hash table entries: 1024 (order: 5, 131072 bytes)

atomic64_test: passed

pinctrl core: initialized pinctrl subsystem

NET: Registered protocol family 16

dump_class_init, 861, success

cpuidle: using governor menu

sunxi iommu: irq = 8

vdso: 2 pages (1 code @ ffffff8008a68000, 1 data @ ffffff80090e4000)

hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.

DMA: preallocated 256 KiB pool for atomic allocations

sun50iw9p1-r-pinctrl r_pio: initialized sunXi PIO driver

sun50iw9p1-pinctrl pio: initialized sunXi PIO driver

iommu: Adding device 1c0e000.ve to group 0

iommu: Adding device 1c00000.vp9 to group 0

iommu: Adding device 1000000.disp to group 0

iommu: Adding device 1480000.g2d to group 0

iommu: Adding device csi0 to group 0

iommu: Adding device csi1 to group 0

iommu: Adding device 6600800.vind: scaler@0 to group 0

iommu: Adding device 6600800.vind: scaler@1 to group 0

iommu: Adding device 6600800.vind: scaler@2 to group 0

iommu: Adding device 6600800.vind: scaler@3 to group 0

iommu: Adding device 6600800.vind: scaler@4 to group 0

iommu: Adding device 6600800.vind: scaler@5 to group 0

iommu: Adding device vinc0 to group 0

iommu: Adding device vinc1 to group 0

iommu: Adding device 1420000.deinterlace to group 0

pwm module init!

sunxi-pm debug v3.10

SCSI subsystem initialized

sunxi_spi_probe()2299 - [spi0] SPI MASTER MODE

sunxi_spi_request_gpio()1927 - [spi0] Pinctrl init spi0

sunxi_spi_clk_init()1977 - [spi0] mclk 100000000

spi spi0: master is unqueued, this is deprecated

sunxi_spi_probe()2380 - [spi0]: driver probe succeed, base ffffff8008064000, irq 294

sunxi_spi_probe()2299 - [spi1] SPI MASTER MODE

sunxi_spi_request_gpio()1927 - [spi1] Pinctrl init spi1

sunxi_spi_clk_init()1977 - [spi1] mclk 100000000

spi spi1: master is unqueued, this is deprecated

sunxi_spi_probe()2380 - [spi1]: driver probe succeed, base ffffff8008066000, irq 295

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

sunxi_i2c_adap_init()2522 - init

sunxi_i2c_probe()2209 - [i2c3] warning: failed to get regulator id

sunxi_i2c_probe()2271 - [i2c3] twi_drv_used = 0

sunxi_i2c_probe()2275 - [i2c3] twi_pkt_interval = 0

twi3 supply twi not found, using dummy regulator

twi_request_gpio()452 - [i2c3] init name: twi3

sunxi_i2c_probe()2209 - [i2c5] warning: failed to get regulator id

sunxi_i2c_probe()2271 - [i2c5] twi_drv_used = 0

sunxi_i2c_probe()2275 - [i2c5] twi_pkt_interval = 0

twi5 supply twi not found, using dummy regulator

twi_request_gpio()452 - [i2c5] init name: twi5

axp20x-i2c 5-0036: AXP20x variant AXP806 found

axp806-aldo2: Bringing 700000uV into 3300000-3300000uV

axp806-aldo3: Bringing 700000uV into 3300000-3300000uV

random: fast init done

axp20x-i2c 5-0036: AXP20X driver loaded

media: Linux media interface: v0.10

Linux video capture interface: v2.00

ion_parse_dt_heap_common: id 0 type 0 name sys_user align 1000

ion_parse_dt_heap_common: id 4 type 4 name cma align 1000

ion_parse_dt_heap_common: id 6 type 6 name secure align 1000

drm config service not available: FFFFFFFF

Advanced Linux Sound Architecture Driver Initialized.

Bluetooth: Core ver 2.22

NET: Registered protocol family 31

Bluetooth: HCI device and connection manager initialized

Bluetooth: HCI socket layer initialized

Bluetooth: L2CAP socket layer initialized

Bluetooth: SCO socket layer initialized

[DISP]disp_module_init

[DISP] disp_init, line: 2216:

smooth display screen: 0 type: 4 mode: 10

[DISP]disp_module_init finish

of_property_read_string ac200.tv_regulator_name fail

[ac200] get ave_regulator_name failed!

[ac200] pwm enable

clocksource: Switched to clocksource arch_sys_counter

VFS: Disk quotas dquot_6.6.0

VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

udc_init, 0

NET: Registered protocol family 2

TCP established hash table entries: 8192 (order: 4, 65536 bytes)

TCP bind hash table entries: 8192 (order: 5, 131072 bytes)

TCP: Hash tables configured (established 8192 bind 8192)

UDP hash table entries: 512 (order: 2, 16384 bytes)

UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

NET: Registered protocol family 1

RPC: Registered named UNIX socket transport module.

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

Trying to unpack rootfs image as initramfs...

Freeing initrd memory: 752K

hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available

audit: initializing netlink subsys (disabled)

audit: type= 2000 audit(0.756: 1): initialized

workingset: timestamp_bits= 45 max_order= 18 bucket_order= 0

Registering sdcardfs 0.1

ntfs: driver 2.1.32 [Flags: R/W].

fuse init (API version 7.26)

SELinux: Registering netfilter hooks

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

failed to get standby led pin assign

gpio_pin_1(76) gpio_is_valid

gpio_pin_2(77) gpio_is_valid

gpio name is PC12, ret = 0

gpio name is PC13, ret = 0

gp-[ 0.949101] console [ttyS0] enabled

console [ttyS0] enabled

bootconsole [earlycon0] disabled

uart uart1: get regulator failed

uart1: ttyS1 at MMIO 0x5000400 (irq = 281, base_baud = 1500000) is a SUNXI

uart uart5: get regulator failed

uart5: ttyS5 at MMIO 0x5001400 (irq = 282, base_baud = 1500000) is a SUNXI

misc dump reg init

deinterlace 1420000.deinterlace: version[1.0.0], ip= 0x300100

Unable to detect cache hierarchy for CPU 0

brd: module loaded

loop: module loaded

zram: Added device: zram0

[NAND][NE] Not found valid nand node on dts

Boot type 1

sunxi-bt soc@03000000: bt: Missing bt_power.

sunxi-bt soc@03000000: bt: bt_power_name ((null))

sunxi-bt soc@03000000: bt: Missing bt_io_regulator.

sunxi-bt soc@03000000: bt: io_regulator_name ((null))

sunxi-bt soc@03000000: bt: bt_rst gpio= 211 mul-sel= 1 pull= -1 drv_level= -1 data= 0

sunxi-bt soc@03000000: bt: devm_pinctrl_get() failed!

sunxi-wlan soc@03000000: wlan: wlan_busnum (1)

sunxi-wlan soc@03000000: wlan: Missing wlan_power.

sunxi-wlan soc@03000000: wlan: wlan_power_name ((null))

sunxi-wlan soc@03000000: wlan: Missing wlan_io_regulator.

sunxi-wlan soc@03000000: wlan: io_regulator_name ((null))

sunxi-wlan soc@03000000: wlan: wlan_regon gpio= 210 mul-sel= 1 pull= -1 drv_level= -1 data= 0

sunxi-wlan soc@03000000: wlan: get gpio chip_en failed

sunxi-wlan soc@03000000: wlan: get gpio power_en failed

sunxi-wlan soc@03000000: wlan: wlan_hostwake gpio= 207 mul-sel= 6 pull= -1 drv_level= -1 data= 0

[ADDR_MGT] addr_mgt_probe: success.

libphy: Fixed MDIO Bus: probed

tun: Universal TUN/TAP device driver, 1.6

gmac-power0: NULL

gmac-power1: NULL

gmac-power2: NULL

PPP generic driver version 2.4.2

PPP BSD Compression module registered

PPP Deflate Compression module registered

PPP MPPE Compression module registered

NET: Registered protocol family 24

PPTP driver version 0.8.5

usbcore: registered new interface driver r8152

usbcore: registered new interface driver asix

usbcore: registered new interface driver ax88179_178a

usbcore: registered new interface driver cdc_ether

usbcore: registered new interface driver net1080

usbcore: registered new interface driver cdc_subset

usbcore: registered new interface driver zaurus

usbcore: registered new interface driver cdc_ncm

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

get drv_vbus is fail, 84

get ehci0-controller, regulator_io is no nocare

[sunxi-ehci0]: probe, pdev->name: 5101000.ehci0-controller, sunxi_ehci: 0xffffff80092b2d78, 0x: ffffff8009dbe000, irq_no: 11e

[sunxi-ehci0]: Not init ehci0

get ehci1-controller, regulator_io is no nocare

[sunxi-ehci1]: probe, pdev->name: 5200000.ehci1-controller, sunxi_ehci: 0xffffff80092b30c0, 0x: ffffff8009e94000, irq_no: 120

sunxi-ehci 5200000.ehci1-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

sunxi-ehci 5200000.ehci1-controller: new USB bus registered, assigned bus number 1

sunxi-ehci 5200000.ehci1-controller: irq 288, io mem 0xffffff8009e94000

sunxi-ehci 5200000.ehci1-controller: USB 0.0 started, EHCI 1.00

hub 1-0: 1.0: USB hub found

hub 1-0: 1.0: 1 port detected

get drv_vbus is fail, 84

get ehci2-controller, regulator_io is no nocare

[sunxi-ehci2]: probe, pdev->name: 5310000.ehci2-controller, sunxi_ehci: 0xffffff80092b3408, 0x: ffffff8009e9e000, irq_no: 122

sunxi-ehci 5310000.ehci2-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

sunxi-ehci 5310000.ehci2-controller: new USB bus registered, assigned bus number 2

sunxi-ehci 5310000.ehci2-controller: irq 290, io mem 0xffffff8009e9e000

sunxi-ehci 5310000.ehci2-controller: USB 0.0 started, EHCI 1.00

sunxi-ehci 5310000.ehci2-controller: ehci_irq: highspeed device connect

hub 2-0: 1.0: USB hub found

hub 2-0: 1.0: 1 port detected

get drv_vbus is fail, 84

get ehci3-controller, regulator_io is no nocare

[sunxi-ehci3]: probe, pdev->name: 5311000.ehci3-controller, sunxi_ehci: 0xffffff80092b3750, 0x: ffffff8009f3a000, irq_no: 124

sunxi-ehci 5311000.ehci3-controller: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver

sunxi-ehci 5311000.ehci3-controller: new USB bus registered, assigned bus number 3

sunxi-ehci 5311000.ehci3-controller: irq 292, io mem 0xffffff8009f3a000

sunxi-ehci 5311000.ehci3-controller: USB 0.0 started, EHCI 1.00

hub 3-0: 1.0: USB hub found

hub 3-0: 1.0: 1 port detected

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

get drv_vbus is fail, 84

get ohci0-controller, regulator_io is no nocare

[sunxi-ohci0]: probe, pdev->name: 5101000.ohci0-controller, sunxi_ohci: 0xffffff80092b2058

[sunxi-ohci0]: Not init ohci0

get ohci1-controller, regulator_io is no nocare

hci: request ohci1-controller gpio: 80

[sunxi-ohci1]: probe, pdev->name: 5200000.ohci1-controller, sunxi_ohci: 0xffffff80092b23a0

sunxi-ohci 5200000.ohci1-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver

sunxi-ohci 5200000.ohci1-controller: new USB bus registered, assigned bus number 4

sunxi-ohci 5200000.ohci1-controller: irq 289, io mem 0x00000040

sunxi-ehci 5310000.ehci2-controller: ehci_irq: highspeed device disconnect

hub 4-0: 1.0: USB hub found

hub 4-0: 1.0: 1 port detected

get drv_vbus is fail, 84

get ohci2-controller, regulator_io is no nocare

[sunxi-ohci2]: probe, pdev->name: 5310000.ohci2-controller, sunxi_ohci: 0xffffff80092b26e8

sunxi-ohci 5310000.ohci2-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver

sunxi-ohci 5310000.ohci2-controller: new USB bus registered, assigned bus number 5

sunxi-ohci 5310000.ohci2-controller: irq 291, io mem 0x00000040

hub 5-0: 1.0: USB hub found

hub 5-0: 1.0: 1 port detected

get drv_vbus is fail, 84

get ohci3-controller, regulator_io is no nocare

[sunxi-ohci3]: probe, pdev->name: 5311000.ohci3-controller, sunxi_ohci: 0xffffff80092b2a30

sunxi-ohci 5311000.ohci3-controller: SW USB2.0 'Open' Host Controller (OHCI) Driver

sunxi-ohci 5311000.ohci3-controller: new USB bus registered, assigned bus number 6

sunxi-ohci 5311000.ohci3-controller: irq 293, io mem 0x00000040

sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device connect

hub 6-0: 1.0: USB hub found

hub 6-0: 1.0: 1 port detected

usbcore: registered new interface driver uas

usbcore: registered new interface driver usb-storage

usbcore: registered new interface driver ums-alauda

usbcore: registered new interface driver ums-cypress

usbcore: registered new interface driver ums-datafab

usbcore: registered new interface driver ums_eneub6250

usbcore: registered new interface driver ums-freecom

usbcore: registered new interface driver ums-isd200

usbcore: registered new interface driver ums-jumpshot

usbcore: registered new interface driver ums-karma

usbcore: registered new interface driver ums-onetouch

sunxi-ehci 5200000.ehci1-controller: ehci_irq: highspeed device disconnect

usbcore: registered new interface driver ums-realtek

usbcore: registered new interface driver ums-sddr09

usbcore: registered new interface driver ums-sddr55

usbcore: registered new interface driver ums-usbat

usb_serial_number: 20080411

input: sunxi-keyboard as /devices/virtual/input/input0

usbcore: registered new interface driver xpad

usbcore: registered new interface driver usb_acecad

usbcore: registered new interface driver aiptek

usbcore: registered new interface driver gtco

usbcore: registered new interface driver hanwang

usbcore: registered new interface driver kbtab

axp2101_pek: axp2101-pek can not register without irq

axp2101-pek: probe of axp2101-pek.0 failed with error -22

sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0

sunxi-rtc rtc: RTC enabled

i2c /dev entries driver

IR NEC protocol handler initialized

IR RC5(x/sz) protocol handler initialized

sunxi_ir_startup: get ir protocol failed

7040000.s_cir supply ir0 not found, using dummy regulator

Registered IR keymap rc_map_sunxi

input: sunxi-ir as /devices/platform/soc/7040000.s _cir/rc/rc0/input1

rc rc0: sunxi-ir as /devices/platform/soc/7040000.s _cir/rc/rc0

sunxi cedar version 0.1

VE: install start!!!

cedar_ve: cedar-ve the get irq is 278

VE: get debugfs_mpp_root is NULL, please check mpp

usb 5-1: new low-speed USB device number 2 using sunxi-ohci

VE: sunxi ve debug register driver failed!

sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout= 16 sec, nowayout= 0)

device-mapper: uevent: version 1.0.3

device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com

Bluetooth: HCI UART driver ver 2.3

Bluetooth: HCI UART protocol H4 registered

Bluetooth: HCI UART protocol LL registered

Bluetooth: HCI UART protocol Three-wire (H5) registered

sun50iw9p1-pinctrl pio: expect_func as: uart0_jtag, but muxsel(3) is func: jtag

sun50iw9p1-pinctrl pio: expect_func as: uart0_jtag, but muxsel(3) is func: uart0

sun50iw9p1-pinctrl pio: expect_func as: uart0_jtag, but muxsel(3) is func: jtag

sun50iw9p1-pinctrl pio: expect_func as: uart0_jtag, but muxsel(3) is func: uart0

sun50iw9p1-pinctrl pio: expect_func as: uart0_jtag, but muxsel(3) is func: jtag

sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14: 29)

sunxi-mmc sdc0: ***ctl-spec-caps*** 8

sunxi-mmc sdc0: No vmmc regulator found

sunxi-mmc sdc0: No vqmmc regulator found

sunxi-mmc sdc0: No vdmmc regulator found

sunxi-mmc sdc0: No vd33sw regulator found

usb 4-1: new low-speed USB device number 2 using sunxi-ohci

sunxi-mmc sdc0: No vd18sw regulator found

sunxi-mmc sdc0: No vq33sw regulator found

sunxi-mmc sdc0: No vq18sw regulator found

sunxi-mmc sdc0: set host busy

sunxi-mmc sdc0: Got CD GPIO

sunxi-mmc sdc0: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B

sunxi-mmc sdc0: no vqmmc, Check if there is regulator

sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B

sunxi-mmc sdc0: detmode: gpio irq

sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B

sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.35 2019-12-11 14: 29)

sunxi-mmc sdc1: ***ctl-spec-caps*** 8

sunxi-mmc sdc1: No vmmc regulator found

sunxi-mmc sdc1: No vqmmc regulator found

sunxi-mmc sdc1: No vdmmc regulator found

sunxi-mmc sdc1: No vd33sw regulator found

sunxi-mmc sdc1: No vd18sw regulator found

sunxi-mmc sdc1: No vq33sw regulator found

sunxi-mmc sdc1: No vq18sw regulator found

sunxi-mmc sdc1: set host busy

mmc: failed to get gpios

sunxi-mmc sdc1: sdc set ios: clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B

sunxi-mmc sdc1: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B

sunxi-mmc sdc1: detmode: manually by software

sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!

sunxi-mmc sdc1: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B

sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!

ledtrig-cpu: registered to indicate activity on CPUs

hidraw: raw HID events driver (C) Jiri Kosina

sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!

sunxi-mmc sdc1: sdc set ios: clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B

input: SINO WEALTH USB Composite Device as /devices/platform/soc/5310000.ohci2-controller/usb5/5-1/5-1: 1.0/0003: 0603: 0002.0001/input/input2

input: HID 4555: 1031 as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1: 1.0/0003: 4555: 1031.0002/input/input3

hid-generic 0003: 0603: 0002.0001: input, hidraw0: USB HID v1.10 Keyboard [SINO WEALTH USB Composite Device] on usb-sunxi-ohci-1/input0

input: SINO WEALTH USB Composite Device as /devices/platform/soc/5310000.ohci2-controller/usb5/5-1/5-1: 1.1/0003: 0603: 0002.0003/input/input4

hid-generic 0003: 4555: 1031.0002: input, hidraw1: USB HID v1.10 Keyboard [HID 4555: 1031] on usb-sunxi-ohci-1/input0

hid-generic 0003: 0603: 0002.0003: input, hiddev0, hidraw2: USB HID v1.10 Mouse [SINO WEALTH USB Composite Device] on usb-sunxi-ohci-1/input1

input: HID 4555: 1031 as /devices/platform/soc/5200000.ohci1-controller/usb4/4-1/4-1: 1.1/0003: 4555: 1031.0004/input/input5

hid-generic 0003: 4555: 1031.0004: input, hidraw3: USB HID v1.10 Mouse [HID 4555: 1031] on usb-sunxi-ohci-1/input1

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

ashmem: initialized

optee: probing for conduit method from DT.

optee: api uid mismatch

usbcore: registered new interface driver snd-usb-audio

[sunxi_hdmi_codec_init] driver and deivce register finished.

[sunxi_internal_codec_probe]: get audio avcc failed

[sunxi_internal_codec_probe]: get audio vcc3v3-audio failed

lineout_vol: 26, linein_gain: 3, fmin_gain: 3, digital_vol: 0, adcdrc_cfg: 0, adchpf_cfg: 0, dacdrc_cfg: 0, dachpf_cfg: 0, ramp_func_used: 1, pa_msleep_time: 100, pa_ctl_level: 1, gpio-spk: 0

sunxi-codec-machine sndcodec: sun50iw9-codec <-> cpudai mapping ok

sndhdmi sndhdmi: ASoC: CPU DAI (null) not registered

sndhdmi sndhdmi: snd_soc_register_card() failed: -517

sunxi-ahub-cpudai 5097000.cpudai3-controller: ahub cpudai id invalid

sunxi-ahub-cpudai: probe of 5097000.cpudai3-controller failed with error -22

sun50iw9p1-pinctrl pio: expect_func as: h_pcm2, but muxsel(2) is func: h_i2s2

sndahub sndahub: sunxi-ahub-aif1 <-> 5097000.cpudai0-controller mapping ok

sndahub sndahub: sunxi-ahub-aif2 <-> 5097000.cpudai1-controller mapping ok

sndahub sndahub: sunxi-ahub-aif3 <-> 5097000.cpudai2-controller mapping ok

pktgen: Packet Generator for packet performance testing. Version: 2.75

u32 classifier

Actions configured

Netfilter messages via NETLINK v0.30.

nfnl_acct: registering with nfnetlink.

nf_conntrack version 0.5.0 (8192 buckets, 32768 max)

ctnetlink v0.93: registering with nfnetlink.

xt_time: kernel timezone is -0000

ipip: IPv4 and MPLS over IPv4 tunneling driver

gre: GRE over IPv4 demultiplexor driver

ip_gre: GRE over IPv4 tunneling driver

IPv4 over IPsec tunneling driver

Initializing XFRM netlink socket

IPsec XFRM device driver

NET: Registered protocol family 10

mip6: Mobile IPv6

sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver

NET: Registered protocol family 17

NET: Registered protocol family 15

l2tp_core: L2TP core driver, V2.0

l2tp_ppp: PPPoL2TP kernel driver, V2.0

Registered cp15_barrier emulation handler

Registered setend emulation handler

registered taskstats version 1

HDMI 2.0 driver init start!

boot_hdmi= true

Can not find the node of esm

ERROR: pinctrl_get for HDMI2.0 DDC fail

Get hdmi_power0: vcc-hdmi

6000000.hdmi supply vcc-hdmi not found, using dummy regulator

Get hdmi_power1: vdd-hdmi

6000000.hdmi supply vdd-hdmi not found, using dummy regulator

hdmi_cec_init

[DISP] disp_device_attached, line: 147:

attached ok, mgr0<-->device0, type= 4

[HDMI receive params]: tv mode: 0xa format: 0x1 data bits: 0x0 eotf: 0x4 cs: 0x101 dvi_hdmi: 2 range: 2 scan: 0 aspect_ratio: 8

[DISP] disp_hdmi_set_mode, line: 648:

hdmi_set_mode is null!

HDMI2.0 module init end

tv_probe()1435 - of_property_read_string tv_power failed!

sunxi-thermal 5070400.thermal_sensor: avcc is not calibrated

cpu cpu1: opp_list_debug_create_link: Failed to create link

cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12)

cpu cpu2: opp_list_debug_create_link: Failed to create link

cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12)

cpu cpu3: opp_list_debug_create_link: Failed to create link

cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12)

sndhdmi sndhdmi: audiohdmi-dai <-> sunxi-ahub-cpu-aif1 mapping ok

get det_vbus is fail, 84

get id is fail, 84

sunxi-rtc rtc: setting system clock to 1970-01-01 00: 16: 22 UTC (982)

snddaudio snddaudio2: codec: snd-soc-dummy, codec_dai: snd-soc-dummy-dai.

snddaudio snddaudio2: snd-soc-dummy-dai <-> sunxi-ahub-cpu-aif2 mapping ok

axp806-dcdcb: disabling

axp806-cldo1: disabling

ALSA device list:

#0: audiocodec

#1: sndahub

#2: sndhdmi

#3: snddaudio2

HDMI cable is connected

Freeing unused kernel memory: 2752K

sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B

init: init first stage started!

init: [libfs_mgr]ReadFstabFromDt(): failed to read fstab from dt

init: Using Android DT directory /proc/device-tree/firmware/android/

sunxi-mmc sdc0: sdc set ios: clk 0Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B

sunxi-mmc sdc0: no vqmmc, Check if there is regulator

sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B

mmc0: host does not support reading read-only switch, assuming write-enable

sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 4 timing LEGACY(SDR12) dt B

sunxi-mmc sdc0: sdc set ios: clk 400000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B

sunxi-mmc sdc0: sdc set ios: clk 150000000Hz bm PP pm ON vdd 21 width 4 timing UHS-SDR104 dt B

mmc0: new ultra high speed SDR104 SDHC card at address aaaa

mmcblk0: mmc0: aaaa SD32G 29.7 GiB

Alternate GPT is invalid, using primary GPT.

mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17

init: bool android: : init: : FirstStageMount: : InitRequiredDevices(): partition(s) not found in /sys, waiting for their uevent(s): metadata, super

init: Wait for partitions returned after 29ms

init: [libfs_mgr]Created logical partition system on device /dev/block/dm-0

init: [libfs_mgr]Created logical partition vendor on device /dev/block/dm-1

init: [libfs_mgr]Created logical partition product on device /dev/block/dm-2

init: [libfs_mgr]superblock s_max_mnt_count: 65535, /dev/block/by-name/metadata

init: [libfs_mgr]Filesystem on /dev/block/by-name/metadata was not cleanly shutdown; state flags: 0x1, incompat feature flags: 0x46

EXT4-fs (mmcblk0p11): recovery complete

EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: errors= panic

EXT4-fs (dm-0): mounted filesystem without journal. Opts: barrier= 1

EXT4-fs (dm-1): mounted filesystem without journal. Opts: barrier= 1

EXT4-fs (dm-2): mounted filesystem without journal. Opts: barrier= 1

init: 14 output lines suppressed due to ratelimiting

random: init: uninitialized urandom read (40 bytes read)

init: Loading SELinux policy

SELinux: 8192 avtab hash slots, 22636 rules.

SELinux: 1 users, 4 roles, 1400 types, 0 bools, 1 sens, 1024 cats

SELinux: 97 classes, 22636 rules

SELinux: Completing initialization.

SELinux: Setting up existing superblocks.

audit: type= 1403 audit(983.640: 2): policy loaded auid= 4294967295 ses= 4294967295

selinux: SELinux: Loaded policy from /vendor/etc/selinux/precompiled_sepolicy

selinux: SELinux: Skipping /product/etc/selinux/product_ file_contexts: empty file

selinux: SELinux: Loaded file_contexts

random: init: uninitialized urandom read (40 bytes read)

init: init second stage started!

init: Using Android DT directory /proc/device-tree/firmware/android/

selinux: SELinux: Skipping /product/etc/selinux/product_file_contexts: empty file

selinux: SELinux: Loaded file_contexts

init: Running restorecon...

init: Overriding previous 'ro.' property 'pm.dexopt.shared': 'speed' with new value 'quicken'

init: Overriding previous 'ro.' property 'ro.kernel.android.checkjni': '0' with new value '1'

selinux: avc: denied { set } for scontext= u: r: vendor_init: s0 tcontext= u: object_r: default_prop: s0 tclass= property_service permissive= 1

selinux: avc: denied { set } for scontext= u: r: vendor_init: s0 tcontext= u: object_r: vold_prop: s0 tclass= property_service permissive= 1

selinux: avc: denied { set } for scontext= u: r: vendor_init: s0 tcontext= u: object_r: dalvik_prop: s0 tclass= property_service permissive= 1

ueventd: ueventd started!

selinux: SELinux: Skipping /product/etc/selinux/product_file_contexts: empty file

selinux: SELinux: Loaded file_contexts

ueventd: Parsing file /ueventd.rc...

apexd: Bootstrap subcommand detected

ueventd: Parsing file /vendor/ueventd.rc...

ueventd: Parsing file /odm/ueventd.rc...

ueventd: Unable to read config file '/odm/ueventd.rc': open() failed: No such file or directory

apexd: Scanning /system/apex for embedded keys

apexd: Scanning /product/apex for embedded keys

apexd: ... does not exist. Skipping

apexd: Scanning /system/apex looking for APEX packages.

apexd: Found /system/apex/com.android.conscrypt

apexd: Skipped when bootstrapping

apexd: Found /system/apex/com.android.runtime.release

apexd: Successfully bind-mounted flattened package /system/apex/com.android.runtime.release on /apex/com.android.runtime@1

apexd: Found /system/apex/com.android.tzdata

apexd: 9 output lines suppressed due to ratelimiting

ueventd: Parsing file /ueventd.sun50iw9p1.rc...

ueventd: Unable to read config file '/ueventd.sun50iw9p1.rc': open() failed: No such file or directory

ueventd: Coldboot took 0.371 seconds

Registered swp emulation handler

init: wait for '/dev/block/by-name/media_data' took 0ms

FAT-fs (mmcblk0p15): bogus number of reserved sectors

FAT-fs (mmcblk0p15): Can't find a valid FAT filesystem

watchdogd: watchdogd started (interval 5, margin 10)!

logd.auditd: start

fsck.f2fs: Info: Fix the reported corruption.

fsck.f2fs: Info: No support kernel version!

fsck.f2fs: Info: Segments per section = 1

fsck.f2fs: Info: Sections per zone = 1

fsck.f2fs: Info: sector size = 512

fsck.f2fs: Info: total sectors = 11648990 (5687 MB)

fsck.f2fs: Info: MKFS version

fsck.f2fs: "4.9.170 #61 SMP PREEMPT Wed Aug 25 17: 06: 18 CST 2021"

fsck.f2fs: Info: FSCK version

fsck.f2fs: from "4.9.170 #61 SMP PREEMPT Wed Aug 25 17: 06: 18 CST 2021"

F2FS-fs (mmcblk0p17): recover_inode: ino = 5cd, name = internal.db, inline = 1

F2FS-fs (mmcblk0p17): recover_data: ino = 5cd (i_size: recover) recovered = 0, err = 0

F2FS-fs (mmcblk0p17): recover_inode: ino = 1ae, name = primary.prof, inline = 3

F2FS-fs (mmcblk0p17): recover_data: ino = 1ae (i_size: recover) recovered = 0, err = 0

F2FS-fs (mmcblk0p17): recover_inode: ino = 657, name = SuggestionEventStore.xml, inline = b

F2FS-fs (mmcblk0p17): recover_dentry: ino = 657, name = SuggestionEventStore.xml, dir = 637, err = 0

F2FS-fs (mmcblk0p17): recover_data: ino = 657 (i_size: recover) recovered = 0, err = 0

F2FS-fs (mmcblk0p17): recover_inode: ino = 658, name = com.android.tv.settings_. system.DateTimeActivity.xml, inline = b

F2FS-fs (mmcblk0p17): recover_dentry: ino = 658, name = com.android.tv.settings_. system.DateTimeActivity.xml, dir = 5ee, err = 0

F2FS-fs (mmcblk0p17): recover_data: ino = 658 (i_size: recover) recovered = 0, err = 0

F2FS-fs (mmcblk0p17): checkpoint: version = 631493e6

F2FS-fs (mmcblk0p17): Mounted with checkpoint version = 631493e6

EXT4-fs (mmcblk0p7): Ignoring removed nomblk_io_submit option

EXT4-fs (mmcblk0p7): recovery complete

EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: errors= remount-ro, nomblk_io_submit

EXT4-fs (mmcblk0p7): Ignoring removed nomblk_io_submit option

EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: barrier= 1, data= ordered, nomblk_io_submit, noauto_da_alloc, errors= panic

init: 14 output lines suppressed due to ratelimiting

zram0: detected capacity change from 0 to 762597376

mkswap: Swapspace size: 744720k, UUID= 477b99e5-3ad2-46ac-a663-ec7c5ec7b1a8

Adding 744720k swap on /dev/block/zram0. Priority: -1 extents: 1 across: 744720k SS

6.564996] mali_kbase: loading out-of-tree module taints kernel.

mali gpu: Regulators probed: 0

mali gpu: Clocks probed: 2

mali gpu: [950mv-600MHz] bak[950mv-600MHz] inde_power: 0 idle: 1 dvfs: 0

mali gpu: GPU identified as 0x3 arch 7.0.9 r0p0 status 0

mali gpu: No memory group manager is configured

mali gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model

mali gpu: Probed as mali0

usbcore: registered new interface driver uvcvideo

USB Video Class driver (1.1.1)

apexd: Marking APEXd as starting

apexd: Scanning /system/apex for embedded keys

apexd: Scanning /product/apex for embedded keys

apexd: ... does not exist. Skipping

apexd: Populating APEX database from mounts...

apexd: Failed to walk /product/apex : Can't open /product/apex for reading : No such file or directory

apexd: Found "/apex/com.android.runtime@1"

apexd: Found "/apex/com.android.tzdata@290000000"

apexd: 2 packages restored.

apexd: Scanning /data/apex/sessions looking for sessions to be activated.

vdc: Waited 0ms for vold

insmod_device_driver

device_chose finished 124!

type= 1400 audit(986.716: 3): avc: denied { setattr } for comm= "init" name= "audio_d" dev= "mmcblk0p17" ino= 118 scontext= u: r: vendor_init: s0 tcontext= u: object_r: audio_rw_data_file: s0 tclass= dir permissive= 1

logd.daemon: reinit

file system registered

sunxi-bt soc@03000000: bt: block state already is 1

healthd: No battery devices found

healthd: battery none chg=

type= 1400 audit(987.630: 4): avc: denied { create } for comm= "audio@2.0-servi" scontext= u: r: hal_audio_default: s0 tcontext= u: r: hal_audio_default: s0 tclass= tcp_socket permissive= 1

type= 1400 audit(987.640: 5): avc: denied { setopt } for comm= "audio@2.0-servi" scontext= u: r: hal_audio_default: s0 tcontext= u: r: hal_audio_default: s0 tclass= tcp_socket permissive= 1

type= 1400 audit(987.640: 6): avc: denied { bind } for comm= "audio@2.0-servi" scontext= u: r: hal_audio_default: s0 tcontext= u: r: hal_audio_default: s0 tclass= tcp_socket permissive= 1

FAT-fs (mmcblk0p16): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

read descriptors

read strings

WCN: marlin_init entry!

WCN: wcn config bt wake host

WCN: marlin_registsr_bt_wake bt_hostwake gpio= 208 mul-sel= 6 pull= -1 drv_level= -1 data= 0 intnum= 193

WCN: wcn config wifi wake host

sdiohal: sdiohal_parse_dt adma_tx: 1, adma_rx: 1, pwrseq: 0, irq type: data, gpio_num: 0, blksize: 840

sdiohal: sdiohal_init ok

WCN: marlin_probe ok!

mtty_probe init device addr: 0xffffffc036053100

-->rfkill_bluetooth_init

<--rfkill_bluetooth_init

init: processing action (sys.usb.config= mtp, adb && sys.usb.configfs= 1 && sys.usb.ffs.ready= 1) from (/init.usb.configfs.rc: 35)

init: processing action (vendor.init.lpm.load= 1) from (/vendor/etc/init/init.bluetooth.common.rc: 36)

capability: warning: `su' uses 32-bit capabilities (legacy support in use)

init: Service 'suproce' (pid 2298) exited with status 0

Do not support any basic 3d video format

init: Service 'wl_info' (pid 2326) exited with status 0

init: Service 'usbd' (pid 2333) exited with status 0

init: processing action (init.svc.mediadrm= running) from (/vendor/etc/init/android.hardware.drm@1.2-service-lazy.widevine.rc: 1)

type= 1400 audit(988.970: 235): avc: denied { getattr } for comm= "su" path= "/sys/fs/selinux/enforce" dev= "selinuxfs" ino= 4 scontext= u: object_r: suproce_exec: s0 tcontext= u: object_r: selinuxfs: s0 tclass= file permissive= 1

input: sunxi-ir-uinput as /devices/virtual/input/input6

type= 1400 audit(988.980: 236): avc: denied { read } for comm= "su" name= "current" dev= "proc" ino= 5574 scontext= u: object_r: suproce_exec: s0 tcontext= u: object_r: suproce_exec: s0 tclass= file permissive= 1

EXT4-fs (dm-0): re-mounted. Opts: (null)

selinux: avc: denied { set } for property= supolicy.loaded pid= 2473 uid= 0 gid= 2000 scontext= u: r: toolbox: s0 tcontext= u: object_r: default_prop: s0 tclass= property_service permissive= 1

init: Untracked pid 2475 exited with status 0

type= 1400 audit(988.980: 237): avc: denied { open } for comm= "su" path= "/proc/2341/attr/current" dev= "proc" ino= 5574 scontext= u: object_r: suproce_exec: s0 tcontext= u: object_r: suproce_exec: s0 tclass= file permissive= 1

type= 1400 audit(988.980: 238): avc: denied { search } for comm= "su" name= "property" dev= "mmcblk0p17" ino= 71 scontext= u: object_r: suproce_exec: s0 tcontext= u: object_r: property_data_file: s0 tclass= dir permissive= 1

type= 1400 audit(988.980: 239): avc: denied { write } for comm= "su" name= "current" dev= "proc" ino= 5574 scontext= u: object_r: suproce_exec: s0 tcontext= u: object_r: suproce_exec: s0 tclass= file permissive= 1

type= 1400 audit(988.980: 240): avc: denied { setcurrent } for comm= "su" scontext= u: object_r: suproce_exec: s0 tcontext= u: object_r: suproce_exec: s0 tclass= process permissive= 1

init: Received control message 'start' for 'bootanim' from pid: 2210 (/system/bin/surfaceflinger)

init: starting service 'bootanim'...

sunxi->update_param: 1

HDMI Audio Enable Successfully

raw_flag value is 0

init: Received control message 'interface_start' for 'android.hardware.light@2.0: : ILight/default' from pid: 2067 (/system/bin/hwservicemanager)

init: starting service 'vendor.light-hal-2-0'...

init: Received control message 'interface_start' for 'android.hardware.light@2.0: : ILight/default' from pid: 2067 (/system/bin/hwservicemanager)

random: crng init done

random: 7 urandom warning(s) missed due to ratelimiting

healthd: battery none chg=

init: processing action (sys.sysctl.extra_free_kbytes= *) from (/init.rc: 814)

init: Service 'vendor.light-hal-2-0' (pid 2665) exited with status 0

binder: undelivered transaction 5800, process died.

acc_open

acc_release

init: Received control message 'interface_start' for 'android.hardware.wifi@1.0: : IWifi/default' from pid: 2067 (/system/bin/hwservicemanager)

init: starting service 'vendor.wifi_hal_legacy'...

init: Received control message 'interface_start' for 'android.hardware.wifi@1.0: : IWifi/default' from pid: 2067 (/system/bin/hwservicemanager)

phy_rtl8211f_led_fixup in

libphy: gmac0: probed

phy_rtl8211f_led_fixup in

sunxi-gmac gmac0 eth0: eth0: Type(7) PHY ID 001cc916 at 0 IRQ poll (gmac0-0: 00)

IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

init: Received control message 'interface_start' for 'android.hardware.light@2.0: : ILight/default' from pid: 2067 (/system/bin/hwservicemanager)

init: starting service 'vendor.light-hal-2-0'...

init: Received control message 'interface_start' for 'android.hardware.light@2.0: : ILight/default' from pid: 2067 (/system/bin/hwservicemanager)

sunxi-gmac gmac0 eth0: Link is Up - 100Mbps/Full - flow control rx/tx

IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

type= 1400 audit(991.246: 254): avc: denied { connectto } for comm= "toybox" path= "/dev/socket/property_service" scontext= u: r: toolbox: s0 tcontext= u: r: init: s0 tclass= unix_stream_socket permissive= 1

type= 1400 audit(1629893835.203: 255): avc: denied { read } for comm= "HwBinder: 2325_4" name= "u: object_r: system_prop: s0" dev= "tmpfs" ino= 1293 scontext= u: r: mediacodec: s0 tcontext= u: object_r: system_prop: s0 tclass= file permissive= 1

type= 1400 audit(1629893835.203: 256): avc: denied { open } for comm= "HwBinder: 2325_4" path= "/dev/__properties__/u: object_r: system_prop: s0" dev= "tmpfs" ino= 1293 scontext= u: r: mediacodec: s0 tcontext= u: object_r: system_prop: s0 tclass= file permissive= 1

type= 1400 audit(1629893835.203: 257): avc: denied { getattr } for comm= "HwBinder: 2325_4" path= "/dev/__properties__/u: object_r: system_prop: s0" dev= "tmpfs" ino= 1293 scontext= u: r: mediacodec: s0 tcontext= u: object_r: system_prop: s0 tclass= file permissive= 1

init: Service 'bootanim' (pid 2522) exited with status 0

sdcardfs version 2.0

sdcardfs: dev_name -> /data/media

sdcardfs: options -> fsuid= 1023, fsgid= 1023, multiuser, derive_gid, default_normal, unshared_obb, mask= 6, userid= 0, gid= 1015

init: processing action (sys.boot_completed= 1) from (/init.rc: 807)

init: starting service 'suproce'...

sdcardfs: mnt -> ffffffc00f2f43a0

init: processing action (sys.boot_completed= 1) from (/vendor/etc/init/hw/init.device.rc: 48)

init: processing action (sys.boot_completed= 1) from (/system/etc/init/appsdisable.rc: 1)

init: starting service 'appsdisable'...

init: processing action (sys.boot_completed= 1) from (/system/etc/init/aw_thermal.rc: 10)

init: starting service 'aw_thermal'...

type= 1400 audit(1629893837.166: 258): avc: denied { transition } for comm= "init" path= "/system/bin/suproce.sh" dev= "dm-0" ino= 715 scontext= u: r: init: s0 tcontext= u: object_r: suproce_exec: s0 tclass= process permissive= 1

type= 1400 audit(1629893837.166: 259): avc: denied { entrypoint } for comm= "init" path= "/system/bin/suproce.sh" dev= "dm-0" ino= 715 scontext= u: object_r: suproce_exec: s0 tcontext= u: object_r: suproce_exec: s0 tclass= file permissive= 1

init: processing action (sys.boot_completed= 1 && sys.logbootcomplete= 1) from (/system/etc/init/bootstat.rc: 78)

init: starting service 'exec 11 (/system/bin/bootstat --record_boot_complete --record_boot_reason --record_time_since_factory_reset -l)'...

init: processing action (sys.boot_completed= 1) from (/system/etc/init/displayservice.rc: 13)

sdcardfs: mounted on top of /data/media type f2fs

Remount options were mask= 23, gid= 9997 for vfsmnt ffffffc00f2f5de0.

sdcardfs : options - debug: 1

sdcardfs : options - gid: 9997

sdcardfs : options - mask: 23

android_work: did not send uevent (0 0 (null))

Remount options were mask= 7, gid= 9997 for vfsmnt ffffffc01d734e20.

sdcardfs : options - debug: 1

sdcardfs : options - gid: 9997

sdcardfs : options - mask: 7

Remount options were mask= 7, gid= 9997 for vfsmnt ffffffc01d735de0.

sdcardfs : options - debug: 1

sdcardfs : options - gid: 9997

sdcardfs : options - mask: 7

audit: audit_lost= 1 audit_rate_limit= 5 audit_backlog_limit= 64

audit: rate limit exceeded

read descriptors

read strings

EXT4-fs (dm-0): re-mounted. Opts: (null)

FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

sdcardfs version 2.0

sdcardfs: dev_name -> /mnt/media_rw/0000-0000

sdcardfs: options -> fsuid= 1023, fsgid= 1023, mask= 6, userid= 0, gid= 1015

sdcardfs: mnt -> ffffffc00c017de0

sdcardfs: mounted on top of /mnt/media_rw/0000-0000 type vfat

Remount options were mask= 18, gid= 9997 for vfsmnt ffffffc009060c60.

sdcardfs : options - debug: 1

sdcardfs : options - gid: 9997

sdcardfs : options - mask: 18

Remount options were mask= 18, gid= 9997 for vfsmnt ffffffc00902e020.

sdcardfs : options - debug: 1

sdcardfs : options - gid: 9997

sdcardfs : options - mask: 18

Remount options were mask= 7, gid= 9997 for vfsmnt ffffffc00902f360.

sdcardfs : options - debug: 1

sdcardfs : options - gid: 9997

sdcardfs : options - mask: 7

BOOTEVENT: 29955.863927: OFF

apexd: Can't open /product/apex for reading : No such file or directory

binder: undelivered transaction 20934, process died.

init: Service 'appsdisable' (pid 3547) exited with status 0

init: Received control message 'stop' for 'gsid' from pid: 2510 (system_server)

init: Sending signal 9 to service 'gsid' (pid 3903) process group...

libprocessgroup: Successfully killed process cgroup uid 0 pid 3903 in 6ms

init: Service 'gsid' (pid 3903) received signal 9

type= 1400 audit(1629893839.440: 437): avc: denied { use } for comm= "toybox" path= "/dev/null" dev= "tmpfs" ino= 1115 scontext= u: r: toolbox: s0 tcontext= u: object_r: suproce_exec: s0 tclass= fd permissive= 1

binder: undelivered transaction 22502, process died.

type= 1400 audit(1652762798.144: 438): avc: denied { module_request } for comm= "blkid" kmod= "block-major-179-16" scontext= u: r: blkid_untrusted: s0 tcontext= u: r: kernel: s0 tclass= system permissive= 1

console: / $