Дерево устройств


Выбор устройства:   OrangePi Zero2   |   TV Box Transpeed   |

  aliases   |   box_start_os0   |   chosen   |   clocks   |   cpus   |   dram   |   dramfreq   |   firmware   |   gpu@0x01800000   |   intc-nmi@07010320   |   interrupt-controller@0   |   interrupt-controller@03020000   |   iommu@030f0000   |   ion   |   memory@40000000   |   n_brom   |   opp_l_table   |   pmu   |   prcm   |   psci   |   soc@03000000   |   sram_a1   |   sram_a2   |   sram_ctrl   |   sunxi-chipid@03006200   |   sunxi-sid-ng@03006000   |   sunxi-sid@03006000   |   s_brom   |   s_cpuscfg   |   timer_arch   |   uboot   |   __symbols__   |

Путь узла: soc@03000000/sdmmc@04020000 (ID = 326)
Свойства (32):

1) bus-width = 0x00000004

2) cap-sd-highspeed =

3) cap-wait-while-busy =

4) cd-gpios = 0x00000053 0x00000005 0x00000006 0x00000006 0x00000001 0x00000003 0xffffffff

5) cd-used-24M =

6) clock-names = osc24m,pll_periph,mmc,ahb,rst

7) clocks = 0x00000009 0x00000086 0x0000008d 0x0000008e 0x0000008f

8) compatible = allwinner,sunxi-mmc-v4p1x

9) ctl-spec-caps = 0x00000008

10) device_type = sdc0

11) interrupts = 0x00000000 0x00000023 0x00000004

12) linux,phandle = 0x00000146

13) max-frequency = 0x08f0d180

14) name = sdmmc

15) no-mmc =

16) no-sdio =

17) phandle = 0x00000146

18) pinctrl-0 = 0x00000090

19) pinctrl-1 = 0x00000091

20) pinctrl-2 = 0x00000092

21) pinctrl-names = default,sleep,uart_jtag

22) reg = 0x00000000 0x04020000 0x00000000 0x00001000

23) sd-uhs-ddr50 =

24) sd-uhs-sdr104 =

25) sd-uhs-sdr50 =

26) status = okay

27) sunxi-power-save-mode =

28) vdmmc18sw-supply = 0x00000068

29) vdmmc33sw-supply = 0x00000069

30) vmmc-supply = 0x00000069

31) vqmmc18sw-supply = 0x00000068

32) vqmmc33sw-supply = 0x00000069