Hit any key to stop autoboot:  0
sc2_ah212#
sc2_ah212# usb_burn aml_sdc_burn.ini
[MSG]usb start
starting USB...
USB0:   No ----gpio-vbus-power
Register 3000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
[MSG]filesize 0x222
[MSG]startclust 0x20002
[MSG]Read position 0 + sz 6c40 past EOF: 546
ERR(../drivers/usb/gadget/v2_burning/v2_common/optimus_img_decoder.c)L89:want to read 27712, but 0
[MSG]cfg[aml_sdc_burn.ini] not valid aml pkg, parse it as ini
[MSG]ini sz 0x222B
[MSG]filesize 0x222
[MSG]startclust 0x20002

=========sdc_burn_paras=====>>>
[common]
erase_bootloader = 0
erase_flash      = 1
reboot           = 0x1
key_overwrite    = 0x0

[burn_ex]
package          = sbx_mod_transpeed_x4_aosp_11_21.img
media            =

[burn_parts]
burn_num         = 0

<<<<=====sdc_burn_paras======

[MSG]filesize 0x63511a14
[MSG]startclust 0x20003
[MSG]image version [0x00000002]
[MSG]itemSizeNotAligned 0x3300
[MSG]align 4 mmc read...        [MSG]Down(mem) part(dtb) sz(0x3f000) fmt(normal)
[MSG]Burn Start...
[MSG]load dt.img to 0x0000000001000000, sz=0x3f000
[MSG]Burn complete
      Amlogic Multi-DTB tool
      GZIP format, decompress...
      Multi DTB detected.
      Multi DTB tool version: v2.
      Support 2 DTBS.
checkhw:458 ddr_size:0xf1000000
      NOT found matched DTB for "sc2_s905x4_ah212-4g"
check_valid_dts: FDT_ERR_BADMAGIC
[MSG]check dts: rc -9
ERR(../drivers/usb/gadget/v2_burning/v2_sdc_burn/optimus_sdc_burn.c)L735:Fail in load dtb for sdc_burn
[MSG]to close image
[MSG]=====Burn Failed!!!!!
[MSG]PLS long-press power key to shut down