показать полный отчет (Display full report)
Имя (Name)
lvm fullreport — Display full report
Синопсис (Synopsis)
lvm fullreport
[ option_args ]
[ position_args ]
Описание (Description)
lvm fullreport produces formatted output about PVs, PV segments,
VGs, LVs and LV segments. The information is all gathered
together for each VG (under a per-VG lock) so it is consistent.
Information gathered from separate calls to vgs, pvs, and lvs can
be inconsistent if information changes between commands.
Использование (Usage)
lvm fullreport
[ -a|--all ]
[ -o|--options String ]
[ -S|--select String ]
[ -O|--sort String ]
[ --aligned ]
[ --binary ]
[ --configreport log|vg|lv|pv|pvseg|seg ]
[ --foreign ]
[ --ignorelockingfailure ]
[ --logonly ]
[ --nameprefixes ]
[ --noheadings ]
[ --nosuffix ]
[ --readonly ]
[ --reportformat basic|json ]
[ --rows ]
[ --separator String ]
[ --shared ]
[ --unbuffered ]
[ --units [Number]r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E
]
[ --unquoted ]
[ COMMON_OPTIONS ]
[ VG ... ]
Common options for lvm:
[ -d|--debug ]
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --lockopt String ]
[ --longhelp ]
[ --nolocking ]
[ --profile String ]
[ --version ]
Параметры (Options)
--aligned
Use with --separator to align the output columns
-a|--all
--binary
Use binary values "0" or "1" instead of descriptive
literal values for columns that have exactly two valid
values to report (not counting the "unknown" value which
denotes that the value could not be determined).
--commandprofile String
The command profile to use for command configuration. See
lvm.conf(5) for more information about profiles.
--config String
Config settings for the command. These override
lvm.conf(5) settings. The String arg uses the same format
as lvm.conf(5), or may use section/field syntax. See
lvm.conf(5) for more information about config.
--configreport log|vg|lv|pv|pvseg|seg
See lvmreport(7).
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the
detail of messages sent to the log file and/or syslog (if
configured).
--devices PV
Devices that the command can use. This option can be
repeated or accepts a comma separated list of devices.
This overrides the devices file.
--devicesfile String
A file listing devices that LVM should use. The file must
exist in /etc/lvm/devices/ and is managed with the
lvmdevices(8) command. This overrides the lvm.conf(5)
devices/devicesfile and devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-
mapper. For testing and debugging.
--foreign
Report/display foreign VGs that would otherwise be
skipped. See lvmsystemid(7) for more information about
foreign VGs.
-h|--help
Display help text.
--ignorelockingfailure
Allows a command to continue with read-only metadata
operations after locking failures.
--lockopt String
Used to pass options for special cases to lvmlockd. See
lvmlockd(8) for more information.
--logonly
Suppress command report and display only log report.
--longhelp
Display long help text.
--nameprefixes
Add an "LVM2_" prefix plus the field name to the output.
Useful with --noheadings to produce a list of field=value
pairs that can be used to set environment variables (for
example, in udev rules).
--noheadings
Suppress the headings line that is normally the first line
of output. Useful if grepping the output.
--nolocking
Disable locking.
--nosuffix
Suppress the suffix on output sizes. Use with --units
(except h and H) if processing the output.
-o|--options String
Comma-separated, ordered list of fields to display in
columns. String arg syntax is: [+|-|#]Field1[,Field2 ...]
The prefix + will append the specified fields to the
default fields, - will remove the specified fields from
the default fields, and # will compact specified fields
(removing them when empty for all rows.) Use -o help to
view the list of all available fields. Use separate lists
of fields to add, remove or compact by repeating the -o
option: -o+field1,field2 -o-field3,field4 -o#field5.
These lists are evaluated from left to right. Use field
name lv_all to view all LV fields, vg_all all VG fields,
pv_all all PV fields, pvseg_all all PV segment fields,
seg_all all LV segment fields, and pvseg_all all PV
segment columns. See the lvm.conf(5) report section for
more config options. See lvmreport(7) for more
information about reporting.
--profile String
An alias for --commandprofile or --metadataprofile,
depending on the command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and
--verbose. Repeat once to also suppress any prompts with
answer 'no'.
--readonly
Run the command in a special read-only mode which will
read on-disk metadata without needing to take any locks.
This can be used to peek inside metadata used by a virtual
machine image while the virtual machine is running. No
attempt will be made to communicate with the device-mapper
kernel driver, so this option is unable to report whether
or not LVs are actually in use.
--reportformat basic|json
Overrides current output format for reports which is
defined globally by the report/output_format setting in
lvm.conf(5). basic is the original format with columns
and rows. If there is more than one report per command,
each report is prefixed with the report name for
identification. json produces report output in JSON
format. See lvmreport(7) for more information.
--rows
Output columns as rows.
-S|--select String
Select objects for processing and reporting based on
specified criteria. The criteria syntax is described by
--select help and lvmreport(7). For reporting commands,
one row is displayed for each object matching the
criteria. See --options help for selectable object
fields. Rows can be displayed with an additional
"selected" field (-o selected) showing 1 if the row
matches the selection and 0 otherwise. For non-reporting
commands which process LVM entities, the selection is used
to choose items to process.
--separator String
String to use to separate each column. Useful if grepping
the output.
--shared
Report/display shared VGs that would otherwise be skipped
when lvmlockd is not being used on the host. See
lvmlockd(8) for more information about shared VGs.
-O|--sort String
Comma-separated ordered list of columns to sort by.
Replaces the default selection. Precede any column with -
for a reverse sort on that column.
-t|--test
Run in test mode. Commands will not update metadata. This
is implemented by disabling all metadata writing but
nevertheless returning success to the calling function.
This may lead to unusual error messages in multi-stage
operations if a tool relies on reading back metadata it
believes has changed but hasn't.
--unbuffered
Produce output immediately without sorting or aligning the
columns properly.
--units [Number]r|R|h|H|b|B|s|S|k|K|m|M|g|G|t|T|p|P|e|E
All sizes are output in these units: human-(r)eadable with
'<' rounding indicator, (h)uman-readable, (b)ytes,
(s)ectors, (k)ilobytes, (m)egabytes, (g)igabytes,
(t)erabytes, (p)etabytes, (e)xabytes. Capitalise to use
multiples of 1000 (S.I.) instead of 1024. Custom units
can be specified, e.g. --units 3M.
--unquoted
When used with --nameprefixes, output values in the
field=value pairs are not quoted.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase
the detail of messages sent to stdout and stderr.
--version
Display version information.
-y|--yes
Do not prompt for confirmation interactively but always
assume the answer yes. Use with extreme caution. (For
automatic no, see -qq.)
Переменные (Variables)
VG Volume Group name. See lvm(8) for valid names.
String See the option description for information about the
string content.
Size[UNIT]
Size is an input number that accepts an optional unit.
Input units are always treated as base two values,
regardless of capitalization, e.g. 'k' and 'K' both refer
to 1024. The default input unit is specified by letter,
followed by |UNIT. UNIT represents other possible input
units: b|B is bytes, s|S is sectors of 512 bytes, k|K is
KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E
is EiB. (This should not be confused with the output
control --units, where capital letters mean multiple of
1000.)
Переменные окружения (Environment variables)
See lvm(8) for information about environment variables used by
lvm. For example, LVM_VG_NAME can generally be substituted for a
required VG parameter.
Смотри также (See also)
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8),
pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8),
vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8),
vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8),
vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8),
vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8),
lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8),
lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), lvm2-activation-generator(8),
blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8),
cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)
