генератор юнитов для / etc / fstab (Unit generator for /etc/fstab)
Имя (Name)
systemd-fstab-generator - Unit generator for /etc/fstab
Синопсис (Synopsis)
/usr/lib/systemd/system-generators/systemd-fstab-generator
Описание (Description)
systemd-fstab-generator is a generator that translates /etc/fstab
(see fstab(5) for details) into native systemd units early at
boot and when configuration of the system manager is reloaded.
This will instantiate mount and swap units as necessary.
The passno field is treated like a simple boolean, and the
ordering information is discarded. However, if the root file
system is checked, it is checked before all the other file
systems.
See systemd.mount(5) and systemd.swap(5) for more information
about special /etc/fstab mount options this generator
understands.
One special topic is handling of symbolic links. Historical init
implementations supported symlinks in /etc/fstab. Because mount
units will refuse mounts where the target is a symbolic link,
this generator will resolve any symlinks as far as possible when
processing /etc/fstab in order to enhance backwards
compatibility. If a symlink target does not exist at the time
that this generator runs, it is assumed that the symlink target
is the final target of the mount.
systemd-fstab-generator implements systemd.generator(7).
Командная строка ядра (Kernel command line)
systemd-fstab-generator understands the following kernel command
line parameters:
fstab=, rd.fstab=
Takes a boolean argument. Defaults to "yes". If "no", causes
the generator to ignore any mounts or swap devices configured
in /etc/fstab. rd.fstab= is honored only by the initial RAM
disk (initrd) while fstab= is honored by both the main system
and the initrd.
root=
Configures the operating system's root filesystem to mount
when running in the initrd. This accepts a device node path
(usually /dev/disk/by-uuid/... or /dev/disk/by-label/... or
similar), or the special values "gpt-auto" and "tmpfs".
Use "gpt-auto" to explicitly request automatic root file
system discovery via systemd-gpt-auto-generator(8).
Use "tmpfs" in order to mount a tmpfs(5) file system as root
file system of the OS. This is useful in combination with
mount.usr= (see below) in order to combine a volatile root
file system with a separate, immutable /usr/ file system.
Also see systemd.volatile= below.
rootfstype=
Takes the root filesystem type that will be passed to the
mount command. rootfstype= is honored by the initrd.
rootflags=
Takes the root filesystem mount options to use. rootflags=
is honored by the initrd.
Note that unlike most kernel command line options this
setting does not override settings made in configuration
files (specifically: the mount option string in /etc/fstab).
See systemd-remount-fs.service(8).
mount.usr=
Takes the /usr/ filesystem to be mounted by the initrd. If
mount.usrfstype= or mount.usrflags= is set, then mount.usr=
will default to the value set in root=.
Otherwise, this parameter defaults to the /usr/ entry found
in /etc/fstab on the root filesystem.
mount.usr= is honored by the initrd.
mount.usrfstype=
Takes the /usr/ filesystem type that will be passed to the
mount command. If mount.usr= or mount.usrflags= is set, then
mount.usrfstype= will default to the value set in
rootfstype=.
Otherwise, this value will be read from the /usr/ entry in
/etc/fstab on the root filesystem.
mount.usrfstype= is honored by the initrd.
mount.usrflags=
Takes the /usr/ filesystem mount options to use. If
mount.usr= or mount.usrfstype= is set, then mount.usrflags=
will default to the value set in rootflags=.
Otherwise, this value will be read from the /usr/ entry in
/etc/fstab on the root filesystem.
mount.usrflags= is honored by the initrd.
systemd.volatile=
Controls whether the system shall boot up in volatile mode.
Takes a boolean argument or the special value state.
If false (the default), this generator makes no changes to
the mount tree and the system is booted up in normal mode.
If true the generator ensures
systemd-volatile-root.service(8) is run as part of the
initial RAM disk ("initrd"). This service changes the mount
table before transitioning to the host system, so that a
volatile memory file system ("tmpfs") is used as root
directory, with only /usr/ mounted into it from the
configured root file system, in read-only mode. This way the
system operates in fully stateless mode, with all
configuration and state reset at boot and lost at shutdown,
as /etc/ and /var/ will be served from the (initially
unpopulated) volatile memory file system.
If set to state the generator will leave the root directory
mount point unaltered, however will mount a "tmpfs" file
system to /var/. In this mode the normal system configuration
(i.e. the contents of "/etc/") is in effect (and may be
modified during system runtime), however the system state
(i.e. the contents of "/var/") is reset at boot and lost at
shutdown.
If this setting is set to "overlay" the root file system is
set up as "overlayfs" mount combining the read-only root
directory with a writable "tmpfs", so that no modifications
are made to disk, but the file system may be modified
nonetheless with all changes being lost at reboot.
Note that in none of these modes the root directory, /etc/,
/var/ or any other resources stored in the root file system
are physically removed. It's thus safe to boot a system that
is normally operated in non-volatile mode temporarily into
volatile mode, without losing data.
Note that with the exception of "overlay" mode, enabling this
setting will only work correctly on operating systems that
can boot up with only /usr/ mounted, and are able to
automatically populate /etc/, and also /var/ in case of
"systemd.volatile=yes".
Also see root=tmpfs above, for a method to combine a "tmpfs"
file system with a regular /usr/ file system (as configured
via mount.usr=). The main distinction between
systemd.volatile=yes, and root=tmpfs in combination
mount.usr= is that the former operates on top of a regular
root file system and temporarily obstructs the files and
directories above its /usr/ subdirectory, while the latter
does not hide any files, but simply mounts a unpopulated
tmpfs as root file system and combines it with a user picked
/usr/ file system.
systemd.swap
Takes a boolean argument or enables the option if specified
without an argument. If disabled, causes the generator to
ignore any swap devices configured in /etc/fstab. Defaults to
enabled.
Смотри также (See also)
systemd(1), fstab(5), systemd.mount(5), systemd.swap(5),
systemd-cryptsetup-generator(8), systemd-gpt-auto-generator(8),
kernel-command-line(7)
