User  |  Syst  |  Libr  |  Device  |  Files  |  Other  |  Admin  |  Head  |

---

   tc-police    ( 8 )

---

---

Имя (Name)

police - policing action

---

Синопсис (Synopsis)

tc ... action police [ rate RATE burst BYTES[/BYTES] ] [
               pkts_rate RATE pkts_burst PACKETS] [ mtu BYTES[/BYTES] ]
               [ peakrate RATE ] [ overhead BYTES ] [ linklayer TYPE ] [
               CONTROL ]

       tc ... filter ... [ estimator SAMPLE AVERAGE ] action police
               avrate RATE [ CONTROL ]

       CONTROL := conform-exceed EXCEEDACT[/NOTEXCEEDACT

       EXCEEDACT/NOTEXCEEDACT := { pipe | ok | reclassify | drop |
               continue | goto chain CHAIN_INDEX }

---

Описание (Description)

The police action allows limiting of the byte or packet rate of
       traffic matched by the filter it is attached to.

       There are two different algorithms available to measure the byte
       rate: The first one uses an internal dual token bucket and is
       configured using the rate, burst, mtu, peakrate, overhead and
       linklayer parameters. The second one uses an in-kernel sampling
       mechanism. It can be fine-tuned using the estimator filter
       parameter.

       There is one algorithm available to measure packet rate and it is
       similar to the first algorithm described for byte rate. It is
       configured using the pkt_rate and pkt_burst parameters.

       At least one of the rate and pkt_rate parameters must be
       configured.

---

Параметры (Options)

rate RATE
              The maximum byte rate of packets passing this action.
              Those exceeding it will be treated as defined by the
              conform-exceed option.

       burst BYTES[/BYTES]
              Set the maximum allowed burst in bytes, optionally
              followed by a slash ('/') sign and cell size which must be
              a power of 2.

       pkt_rate RATE
              The maximum packet rate or packets passing this action.
              Those exceeding it will be treated as defined by the
              conform-exceed option.

       pkt_burst PACKETS
              Set the maximum allowed burst in packets.

       mtu BYTES[/BYTES]
              This is the maximum packet size handled by the policer
              (larger ones will be handled like they exceeded the
              configured rate). Setting this value correctly will
              improve the scheduler's precision.  Value formatting is
              identical to burst above. Defaults to unlimited.

       peakrate RATE
              Set the maximum bucket depletion rate, exceeding rate.

       avrate RATE
              Make use of an in-kernel bandwidth rate estimator and
              match the given RATE against it.

       overhead BYTES
              Account for protocol overhead of encapsulating output
              devices when computing rate and peakrate.

       linklayer TYPE
              Specify the link layer type.  TYPE may be one of ethernet
              (the default), atm or adsl (which are synonyms). It is
              used to align the precomputed rate tables to ATM cell
              sizes, for ethernet no action is taken.

       estimator SAMPLE AVERAGE
              Fine-tune the in-kernel packet rate estimator.  SAMPLE and
              AVERAGE are time values and control the frequency in which
              samples are taken and over what timespan an average is
              built.

       conform-exceed EXCEEDACT[/NOTEXCEEDACT]
              Define how to handle packets which exceed or conform the
              configured bandwidth limit. Possible values are:

              continue
                     Don't do anything, just continue with the next
                     action in line.

              drop   Drop the packet immediately.

              shot   This is a synonym to drop.

              ok     Accept the packet. This is the default for
                     conforming packets.

              pass   This is a synonym to ok.

              reclassify
                     Treat the packet as non-matching to the filter this
                     action is attached to and continue with the next
                     filter in line (if any). This is the default for
                     exceeding packets.

              pipe   Pass the packet to the next action in line.

---

Примеры (Examples)

A typical application of the police action is to enforce ingress
       traffic rate by dropping exceeding packets. Although better done
       on the sender's side, especially in scenarios with lack of peer
       control (e.g. with dial-up providers) this is often the best one
       can do in order to keep latencies low under high load. The
       following establishes input bandwidth policing to 1mbit/s using
       the ingress qdisc and u32 filter:

              # tc qdisc add dev eth0 handle ffff: ingress
              # tc filter add dev eth0 parent ffff: u32 \
                   match u32 0 0 \
                   police rate 1mbit burst 100k

       As an action can not live on it's own, there always has to be a
       filter involved as link between qdisc and action. The example
       above uses u32 for that, which is configured to effectively match
       any packet (passing it to the police action thereby).

---

Смотри также (See also)

tc(8)

---