Print or change terminal characteristics.
Mandatory arguments to long options are mandatory for short
options too.
-a, --all
print all current settings in human-readable form
-g, --save
print all current settings in a stty-readable form
-F, --file=DEVICE
open and use the specified DEVICE instead of stdin
--help display this help and exit
--version
output version information and exit
Optional - before SETTING indicates negation. An * marks
non-POSIX settings. The underlying system defines which settings
are available.
Special characters:
* discard CHAR
CHAR will toggle discarding of output
eof CHAR
CHAR will send an end of file (terminate the input)
eol CHAR
CHAR will end the line
* eol2 CHAR
alternate CHAR for ending the line
erase CHAR
CHAR will erase the last character typed
intr CHAR
CHAR will send an interrupt signal
kill CHAR
CHAR will erase the current line
* lnext CHAR
CHAR will enter the next character quoted
quit CHAR
CHAR will send a quit signal
* rprnt CHAR
CHAR will redraw the current line
start CHAR
CHAR will restart the output after stopping it
stop CHAR
CHAR will stop the output
susp CHAR
CHAR will send a terminal stop signal
* swtch CHAR
CHAR will switch to a different shell layer
* werase CHAR
CHAR will erase the last word typed
Special settings:
N set the input and output speeds to N bauds
* cols N
tell the kernel that the terminal has N columns
* columns N
same as cols N
* [-]drain
wait for transmission before applying settings (on by
default)
ispeed N
set the input speed to N
* line N
use line discipline N
min N with -icanon, set N characters minimum for a completed
read
ospeed N
set the output speed to N
* rows N
tell the kernel that the terminal has N rows
* size print the number of rows and columns according to the
kernel
speed print the terminal speed
time N with -icanon, set read timeout of N tenths of a second
Control settings:
[-]clocal
disable modem control signals
[-]cread
allow input to be received
* [-]crtscts
enable RTS/CTS handshaking
csN set character size to N bits, N in [5..8]
[-]cstopb
use two stop bits per character (one with '-')
[-]hup send a hangup signal when the last process closes the tty
[-]hupcl
same as [-]hup
[-]parenb
generate parity bit in output and expect parity bit in
input
[-]parodd
set odd parity (or even parity with '-')
* [-]cmspar
use "stick" (mark/space) parity
Input settings:
[-]brkint
breaks cause an interrupt signal
[-]icrnl
translate carriage return to newline
[-]ignbrk
ignore break characters
[-]igncr
ignore carriage return
[-]ignpar
ignore characters with parity errors
* [-]imaxbel
beep and do not flush a full input buffer on a character
[-]inlcr
translate newline to carriage return
[-]inpck
enable input parity checking
[-]istrip
clear high (8th) bit of input characters
* [-]iutf8
assume input characters are UTF-8 encoded
* [-]iuclc
translate uppercase characters to lowercase
* [-]ixany
let any character restart output, not only start character
[-]ixoff
enable sending of start/stop characters
[-]ixon
enable XON/XOFF flow control
[-]parmrk
mark parity errors (with a 255-0-character sequence)
[-]tandem
same as [-]ixoff
Output settings:
* bsN backspace delay style, N in [0..1]
* crN carriage return delay style, N in [0..3]
* ffN form feed delay style, N in [0..1]
* nlN newline delay style, N in [0..1]
* [-]ocrnl
translate carriage return to newline
* [-]ofdel
use delete characters for fill instead of NUL characters
* [-]ofill
use fill (padding) characters instead of timing for delays
* [-]olcuc
translate lowercase characters to uppercase
* [-]onlcr
translate newline to carriage return-newline
* [-]onlret
newline performs a carriage return
* [-]onocr
do not print carriage returns in the first column
[-]opost
postprocess output
* tabN horizontal tab delay style, N in [0..3]
* tabs same as tab0
* -tabs
same as tab3
* vtN vertical tab delay style, N in [0..1]
Local settings:
[-]crterase
echo erase characters as backspace-space-backspace
* crtkill
kill all line by obeying the echoprt and echoe settings
* -crtkill
kill all line by obeying the echoctl and echok settings
* [-]ctlecho
echo control characters in hat notation ('^c')
[-]echo
echo input characters
* [-]echoctl
same as [-]ctlecho
[-]echoe
same as [-]crterase
[-]echok
echo a newline after a kill character
* [-]echoke
same as [-]crtkill
[-]echonl
echo newline even if not echoing other characters
* [-]echoprt
echo erased characters backward, between '\' and '/'
* [-]extproc
enable "LINEMODE"; useful with high latency links
* [-]flusho
discard output
[-]icanon
enable special characters: erase, kill, werase, rprnt
[-]iexten
enable non-POSIX special characters
[-]isig
enable interrupt, quit, and suspend special characters
[-]noflsh
disable flushing after interrupt and quit special
characters
* [-]prterase
same as [-]echoprt
* [-]tostop
stop background jobs that try to write to the terminal
* [-]xcase
with icanon, escape with '\' for uppercase characters
Combination settings:
* [-]LCASE
same as [-]lcase
cbreak same as -icanon
-cbreak
same as icanon
cooked same as brkint ignpar istrip icrnl ixon opost isig icanon,
eof and eol characters to their default values
-cooked
same as raw
crt same as echoe echoctl echoke
dec same as echoe echoctl echoke -ixany intr ^c erase 0177
kill ^u
* [-]decctlq
same as [-]ixany
ek erase and kill characters to their default values
evenp same as parenb -parodd cs7
-evenp same as -parenb cs8
* [-]lcase
same as xcase iuclc olcuc
litout same as -parenb -istrip -opost cs8
-litout
same as parenb istrip opost cs7
nl same as -icrnl -onlcr
-nl same as icrnl -inlcr -igncr onlcr -ocrnl -onlret
oddp same as parenb parodd cs7
-oddp same as -parenb cs8
[-]parity
same as [-]evenp
pass8 same as -parenb -istrip cs8
-pass8 same as parenb istrip cs7
raw same as -ignbrk -brkint -ignpar -parmrk -inpck -istrip
-inlcr -igncr -icrnl -ixon -ixoff -icanon -opost -isig
-iuclc -ixany -imaxbel -xcase min 1 time 0
-raw same as cooked
sane same as cread -ignbrk brkint -inlcr -igncr icrnl icanon
iexten echo echoe echok -echonl -noflsh -ixoff -iutf8
-iuclc -ixany imaxbel -xcase -olcuc -ocrnl opost -ofill
onlcr -onocr -onlret nl0 cr0 tab0 bs0 vt0 ff0 isig -tostop
-ofdel -echoprt echoctl echoke -extproc -flusho, all
special characters to their default values
Handle the tty line connected to standard input. Without
arguments, prints baud rate, line discipline, and deviations from
stty sane. In settings, CHAR is taken literally, or coded as in
^c, 0x37, 0177 or 127; special values ^- or undef used to disable
special characters.
