установить и получить маску соответствия ЦП потока (set and get a thread's CPU affinity mask)
Имя (Name)
sched_setaffinity, sched_getaffinity - set and get a thread's CPU
affinity mask
Синопсис (Synopsis)
#define _GNU_SOURCE /* See feature_test_macros(7) */
#include <sched.h>
int sched_setaffinity(pid_t pid, size_t cpusetsize,
const cpu_set_t *mask);
int sched_getaffinity(pid_t pid, size_t cpusetsize,
cpu_set_t *mask);
Описание (Description)
A thread's CPU affinity mask determines the set of CPUs on which
it is eligible to run. On a multiprocessor system, setting the
CPU affinity mask can be used to obtain performance benefits.
For example, by dedicating one CPU to a particular thread (i.e.,
setting the affinity mask of that thread to specify a single CPU,
and setting the affinity mask of all other threads to exclude
that CPU), it is possible to ensure maximum execution speed for
that thread. Restricting a thread to run on a single CPU also
avoids the performance cost caused by the cache invalidation that
occurs when a thread ceases to execute on one CPU and then
recommences execution on a different CPU.
A CPU affinity mask is represented by the cpu_set_t structure, a
"CPU set", pointed to by mask. A set of macros for manipulating
CPU sets is described in CPU_SET(3).
sched_setaffinity() sets the CPU affinity mask of the thread
whose ID is pid to the value specified by mask. If pid is zero,
then the calling thread is used. The argument cpusetsize is the
length (in bytes) of the data pointed to by mask. Normally this
argument would be specified as sizeof(cpu_set_t).
If the thread specified by pid is not currently running on one of
the CPUs specified in mask, then that thread is migrated to one
of the CPUs specified in mask.
sched_getaffinity() writes the affinity mask of the thread whose
ID is pid into the cpu_set_t structure pointed to by mask. The
cpusetsize argument specifies the size (in bytes) of mask. If
pid is zero, then the mask of the calling thread is returned.
Возвращаемое значение (Return value)
On success, sched_setaffinity() and sched_getaffinity() return 0
(but see "C library/kernel differences" below, which notes that
the underlying sched_getaffinity() differs in its return value).
On failure, -1 is returned, and errno is set to indicate the
error.
Ошибки (Error)
EFAULT A supplied memory address was invalid.
EINVAL The affinity bit mask mask contains no processors that are
currently physically on the system and permitted to the
thread according to any restrictions that may be imposed
by cpuset cgroups or the "cpuset" mechanism described in
cpuset(7).
EINVAL (sched_getaffinity() and, in kernels before 2.6.9,
sched_setaffinity()) cpusetsize is smaller than the size
of the affinity mask used by the kernel.
EPERM (sched_setaffinity()) The calling thread does not have
appropriate privileges. The caller needs an effective
user ID equal to the real user ID or effective user ID of
the thread identified by pid, or it must possess the
CAP_SYS_NICE capability in the user namespace of the
thread pid.
ESRCH The thread whose ID is pid could not be found.
Версии (Versions)
The CPU affinity system calls were introduced in Linux kernel
2.5.8. The system call wrappers were introduced in glibc 2.3.
Initially, the glibc interfaces included a cpusetsize argument,
typed as unsigned int. In glibc 2.3.3, the cpusetsize argument
was removed, but was then restored in glibc 2.3.4, with type
size_t.
Стандарты (Conforming to)
These system calls are Linux-specific.
Примечание (Note)
After a call to sched_setaffinity(), the set of CPUs on which the
thread will actually run is the intersection of the set specified
in the mask argument and the set of CPUs actually present on the
system. The system may further restrict the set of CPUs on which
the thread runs if the "cpuset" mechanism described in cpuset(7)
is being used. These restrictions on the actual set of CPUs on
which the thread will run are silently imposed by the kernel.
There are various ways of determining the number of CPUs
available on the system, including: inspecting the contents of
/proc/cpuinfo; using sysconf(3) to obtain the values of the
_SC_NPROCESSORS_CONF and _SC_NPROCESSORS_ONLN parameters; and
inspecting the list of CPU directories under
/sys/devices/system/cpu/.
sched(7) has a description of the Linux scheduling scheme.
The affinity mask is a per-thread attribute that can be adjusted
independently for each of the threads in a thread group. The
value returned from a call to gettid(2) can be passed in the
argument pid. Specifying pid as 0 will set the attribute for the
calling thread, and passing the value returned from a call to
getpid(2) will set the attribute for the main thread of the
thread group. (If you are using the POSIX threads API, then use
pthread_setaffinity_np(3) instead of sched_setaffinity().)
The isolcpus boot option can be used to isolate one or more CPUs
at boot time, so that no processes are scheduled onto those CPUs.
Following the use of this boot option, the only way to schedule
processes onto the isolated CPUs is via sched_setaffinity() or
the cpuset(7) mechanism. For further information, see the kernel
source file Documentation/admin-guide/kernel-parameters.txt. As
noted in that file, isolcpus is the preferred mechanism of
isolating CPUs (versus the alternative of manually setting the
CPU affinity of all processes on the system).
A child created via fork(2) inherits its parent's CPU affinity
mask. The affinity mask is preserved across an execve(2).
C library/kernel differences
This manual page describes the glibc interface for the CPU
affinity calls. The actual system call interface is slightly
different, with the mask being typed as unsigned long *,
reflecting the fact that the underlying implementation of CPU
sets is a simple bit mask.
On success, the raw sched_getaffinity() system call returns the
number of bytes placed copied into the mask buffer; this will be
the minimum of cpusetsize and the size (in bytes) of the
cpumask_t data type that is used internally by the kernel to
represent the CPU set bit mask.
Handling systems with large CPU affinity masks
The underlying system calls (which represent CPU masks as bit
masks of type unsigned long *) impose no restriction on the size
of the CPU mask. However, the cpu_set_t data type used by glibc
has a fixed size of 128 bytes, meaning that the maximum CPU
number that can be represented is 1023. If the kernel CPU
affinity mask is larger than 1024, then calls of the form:
sched_getaffinity(pid, sizeof(cpu_set_t), &mask);
fail with the error EINVAL, the error produced by the underlying
system call for the case where the mask size specified in
cpusetsize is smaller than the size of the affinity mask used by
the kernel. (Depending on the system CPU topology, the kernel
affinity mask can be substantially larger than the number of
active CPUs in the system.)
When working on systems with large kernel CPU affinity masks, one
must dynamically allocate the mask argument (see CPU_ALLOC(3)).
Currently, the only way to do this is by probing for the size of
the required mask using sched_getaffinity() calls with increasing
mask sizes (until the call does not fail with the error EINVAL).
Be aware that CPU_ALLOC(3) may allocate a slightly larger CPU set
than requested (because CPU sets are implemented as bit masks
allocated in units of sizeof(long)). Consequently,
sched_getaffinity() can set bits beyond the requested allocation
size, because the kernel sees a few additional bits. Therefore,
the caller should iterate over the bits in the returned set,
counting those which are set, and stop upon reaching the value
returned by CPU_COUNT(3) (rather than iterating over the number
of bits requested to be allocated).
Примеры (Examples)
The program below creates a child process. The parent and child
then each assign themselves to a specified CPU and execute
identical loops that consume some CPU time. Before terminating,
the parent waits for the child to complete. The program takes
three command-line arguments: the CPU number for the parent, the
CPU number for the child, and the number of loop iterations that
both processes should perform.
As the sample runs below demonstrate, the amount of real and CPU
time consumed when running the program will depend on intra-core
caching effects and whether the processes are using the same CPU.
We first employ lscpu(1) to determine that this (x86) system has
two cores, each with two CPUs:
$ lscpu | egrep -i 'core.*:|socket'
Thread(s) per core: 2
Core(s) per socket: 2
Socket(s): 1
We then time the operation of the example program for three
cases: both processes running on the same CPU; both processes
running on different CPUs on the same core; and both processes
running on different CPUs on different cores.
$ time -p ./a.out 0 0 100000000
real 14.75
user 3.02
sys 11.73
$ time -p ./a.out 0 1 100000000
real 11.52
user 3.98
sys 19.06
$ time -p ./a.out 0 3 100000000
real 7.89
user 3.29
sys 12.07
Program source
#define _GNU_SOURCE
#include <sched.h>
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <sys/wait.h>
#define errExit(msg) do { perror(msg); exit(EXIT_FAILURE); \
} while (0)
int
main(int argc, char *argv[])
{
cpu_set_t set;
int parentCPU, childCPU;
int nloops;
if (argc != 4) {
fprintf(stderr, "Usage: %s parent-cpu child-cpu num-loops\n",
argv[0]);
exit(EXIT_FAILURE);
}
parentCPU = atoi(argv[1]);
childCPU = atoi(argv[2]);
nloops = atoi(argv[3]);
CPU_ZERO(&set);
switch (fork()) {
case -1: /* Error */
errExit("fork");
case 0: /* Child */
CPU_SET(childCPU, &set);
if (sched_setaffinity(getpid(), sizeof(set), &set) == -1)
errExit("sched_setaffinity");
for (int j = 0; j < nloops; j++)
getppid();
exit(EXIT_SUCCESS);
default: /* Parent */
CPU_SET(parentCPU, &set);
if (sched_setaffinity(getpid(), sizeof(set), &set) == -1)
errExit("sched_setaffinity");
for (int j = 0; j < nloops; j++)
getppid();
wait(NULL); /* Wait for child to terminate */
exit(EXIT_SUCCESS);
}
}
Смотри также (See also)
lscpu(1), nproc(1), taskset(1), clone(2), getcpu(2),
getpriority(2), gettid(2), nice(2), sched_get_priority_max(2),
sched_get_priority_min(2), sched_getscheduler(2),
sched_setscheduler(2), setpriority(2), CPU_SET(3), get_nprocs(3),
pthread_setaffinity_np(3), sched_getcpu(3), capabilities(7),
cpuset(7), sched(7), numactl(8)
