закачивать / скачивать файлы по протоколу ASCII (upload/download files using the ASCII protocol)
Имя (Name)
ascii-xfr - upload/download files using the ASCII protocol
Синопсис (Synopsis)
ascii-xfr -s|-r [-ednv] [-l linedelay] [-c characterdelay]
filename
Описание (Description)
Ascii-xfr Transfers files in ASCII mode. This means no flow
control, no checksumming and no file-name negotiation. It should
only be used if the remote system doesn't understand anything
else.
The ASCII protocol transfers files line-by-line. The EOL (End-Of-
Line) character is transmitted as CRLF. When receiving, the CR
character is stripped from the incoming file. The Control-Z
(ASCII 26) character signals End-Of-File, if option -e is
specified (unless you change it to Control-D (ASCII 4) with -d).
Ascii-xfr reads from stdin when receiving, and sends data on
stdout when sending. Some form of input or output redirection to
the modem device is thus needed when downloading or uploading,
respectively.
Параметры (Options)
-s Send a file.
-r Receive a file. One of -s or -r must be present.
-e Send the End-Of-File character (Control-Z, ASCII 26 by
default) when uploading has finished.
-d Use the Control-D (ASCII 4) as End-Of-File character.
-n Do not translate CR to CRLF and vice versa.
-v Verbose: show transfer statistics on the stderr output.
-l milliseconds
When transmitting, pause for this delay after each line.
-c milliseconds
When transmitting, pause for this delay after each
character.
file Name of the file to send or receive. When receiving, any
existing file by this name will be truncated.
USAGE WITH MINICOM
If you want to call this program from minicom(1), start minicom
and go to the Options menu. Select File transfer protocols. Add
the following lines, for example as protocols I and J.
I Ascii /usr/bin/ascii-xfr -sv Y U N Y
J Ascii /usr/bin/ascii-xfr -rv Y D N Y
