добавить источник события изменения состояния дочернего процесса в цикл событий (add a child process state change event source to an event loop)
Имя (Name)
sd_event_add_child, sd_event_add_child_pidfd,
sd_event_source_get_child_pid, sd_event_source_get_child_pidfd,
sd_event_source_get_child_pidfd_own,
sd_event_source_set_child_pidfd_own,
sd_event_source_get_child_process_own,
sd_event_source_set_child_process_own,
sd_event_source_send_child_signal, sd_event_child_handler_t - Add
a child process state change event source to an event loop
Синопсис (Synopsis)
#include <systemd/sd-event.h>
typedef struct sd_event_source sd_event_source;
typedef int (*sd_event_child_handler_t)(sd_event_source *s,
const siginfo_t *si,
void *userdata);
int sd_event_add_child(sd_event *event, sd_event_source **source,
pid_t pid, int options,
sd_event_child_handler_t handler,
void *userdata);
int sd_event_add_child_pidfd(sd_event *event,
sd_event_source **source, int pidfd,
int options,
sd_event_child_handler_t handler,
void *userdata);
int sd_event_source_get_child_pid(sd_event_source *source,
pid_t *pid);
int sd_event_source_get_child_pidfd(sd_event_source *source);
int sd_event_source_get_child_pidfd_own(sd_event_source *source);
int sd_event_source_set_child_pidfd_own(sd_event_source *source,
int own);
int
sd_event_source_get_child_process_own(sd_event_source *source);
int
sd_event_source_set_child_process_own(sd_event_source *source,
int own);
int sd_event_source_send_child_signal(sd_event_source *source,
int sig,
const siginfo_t *info,
unsigned flags);
Описание (Description)
sd_event_add_child() adds a new child process state change event
source to an event loop. The event loop object is specified in
the event parameter, the event source object is returned in the
source parameter. The pid parameter specifies the PID of the
process to watch, which must be a direct child process of the
invoking process. The handler must reference a function to call
when the process changes state. The handler function will be
passed the userdata pointer, which may be chosen freely by the
caller. The handler also receives a pointer to a siginfo_t
structure containing information about the child process event.
The options parameter determines which state changes will be
watched for. It must contain an OR-ed mask of WEXITED (watch for
the child process terminating), WSTOPPED (watch for the child
process being stopped by a signal), and WCONTINUED (watch for the
child process being resumed by a signal). See waitid(2) for
further information.
Only a single handler may be installed for a specific child
process. The handler is enabled for a single event
(SD_EVENT_ONESHOT), but this may be changed with
sd_event_source_set_enabled(3). If the handler function returns a
negative error code, it will be disabled after the invocation,
even if the SD_EVENT_ON mode was requested before.
To destroy an event source object use sd_event_source_unref(3),
but note that the event source is only removed from the event
loop when all references to the event source are dropped. To make
sure an event source does not fire anymore, even when there's
still a reference to it kept, consider setting the event source
to SD_EVENT_OFF with sd_event_source_set_enabled(3).
The SIGCHLD signal must be blocked in all threads before this
function is called (using sigprocmask(2) or pthread_sigmask(3)).
If the second parameter of sd_event_add_child() is passed as NULL
no reference to the event source object is returned. In this case
the event source is considered "floating", and will be destroyed
implicitly when the event loop itself is destroyed.
Note that the handler function is invoked at a time where the
child process is not reaped yet (and thus still is exposed as a
zombie process by the kernel). However, the child will be reaped
automatically after the function returns. Child processes for
which no child process state change event sources are installed
will not be reaped by the event loop implementation.
If the handler parameter to sd_event_add_child() is NULL, and the
event source fires, this will be considered a request to exit the
event loop. In this case, the userdata parameter, cast to an
integer, is passed as the exit code parameter to
sd_event_exit(3).
If both a child process state change event source and a SIGCHLD
signal event source is installed in the same event loop, the
configured event source priorities decide which event source is
dispatched first. If the signal handler is processed first, it
should leave the child processes for which child process state
change event sources are installed unreaped.
sd_event_add_child_pidfd() is similar to sd_event_add_child() but
takes a file descriptor referencing the process ("pidfd") instead
of the numeric PID. A suitable file descriptor may be acquired
via pidfd_open(2) and related calls. The passed file descriptor
is not closed when the event source is freed again, unless
sd_event_source_set_child_pidfd_own() is used to turn this
behaviour on. Note that regardless which of sd_event_add_child()
and sd_event_add_child_pidfd() is used for allocating an event
source, the watched process has to be a direct child process of
the invoking process. Also in both cases SIGCHLD has to be
blocked in the invoking process.
sd_event_source_get_child_pid() retrieves the configured PID of a
child process state change event source created previously with
sd_event_add_child(). It takes the event source object as the
source parameter and a pointer to a pid_t variable to return the
process ID in.
sd_event_source_get_child_pidfd() retrieves the file descriptor
referencing the watched process ("pidfd") if this functionality
is available. On kernels that support the concept the event loop
will make use of pidfds to watch child processes, regardless if
the individual event sources are allocated via
sd_event_add_child() or sd_event_add_child_pidfd(). If the latter
call was used to allocate the event source, this function returns
the file descriptor used for allocation. On kernels that do not
support the pidfd concept this function will fail with
EOPNOTSUPP. This call takes the event source object as the source
parameter and returns the numeric file descriptor.
sd_event_source_get_child_pidfd_own() may be used to query
whether the pidfd the event source encapsulates shall be closed
when the event source is freed. This function returns zero if the
pidfd shall be left open, and positive if it shall be closed
automatically. By default this setting defaults to on if the
event source was allocated via sd_event_add_child() and off if it
was allocated via sd_event_add_child_pidfd(). The
sd_event_source_set_child_pidfd_own() function may be used to
change the setting and takes a boolean parameter with the new
setting.
sd_event_source_get_child_process_own() may be used to query
whether the process the event source watches shall be killed
(with SIGKILL) and reaped when the event source is freed. This
function returns zero if the process shell be left running, and
positive if it shall be killed and reaped automatically. By
default this setting defaults to off. The
sd_event_source_set_child_process_own() function may be used to
change the setting and takes a boolean parameter with the new
setting. Note that currently if the calling process is terminated
abnormally the watched process might survive even thought the
event source ceases to exist. This behaviour might change
eventually.
sd_event_source_send_child_signal() may be used to send a UNIX
signal to the watched process. If the pidfd concept is supported
in the kernel, this is implemented via pidfd_send_signal(2) and
otherwise via rt_sigqueueinfo(2) (or via kill(2) in case info is
NULL). The specified parameters match those of these underlying
system calls, except that the info is never modified (and is thus
declared constant). Like for the underlying system calls, the
flags parameter currently must be zero.
Возвращаемое значение (Return value)
On success, these functions return 0 or a positive integer. On
failure, they return a negative errno-style error code.
Errors
Returned errors may indicate the following problems:
-ENOMEM
Not enough memory to allocate an object.
-EINVAL
An invalid argument has been passed. This includes specifying
an empty mask in options or a mask which contains values
different than a combination of WEXITED, WSTOPPED, and
WCONTINUED.
-EBUSY
A handler is already installed for this child process, or
SIGCHLD is not blocked.
-ESTALE
The event loop is already terminated.
-ECHILD
The event loop has been created in a different process.
-EDOM
The passed event source is not a child process event source.
-EOPNOTSUPP
A pidfd was requested but the kernel does not support this
concept.
Примечание (Note)
These APIs are implemented as a shared library, which can be
compiled and linked to with the libsystemd pkg-config(1) file.
Смотри также (See also)
systemd(1), sd-event(3), sd_event_new(3), sd_event_now(3),
sd_event_add_io(3), sd_event_add_time(3), sd_event_add_signal(3),
sd_event_add_inotify(3), sd_event_add_defer(3),
sd_event_source_set_enabled(3), sd_event_source_set_priority(3),
sd_event_source_set_userdata(3),
sd_event_source_set_description(3),
sd_event_source_set_floating(3), waitid(2), sigprocmask(2),
pthread_sigmask(3), pidfd_open(2), pidfd_send_signal(2),
rt_sigqueueinfo(2), kill(2)
