схема базы данных hardware_vtep (hardware_vtep database schema)
Logical_Router TABLE
A logical router, or VRF. A logical router may be connected to
one or more logical switches. Subnet addresses and interface
addresses may be configured on the interfaces.
Summary:
switch_binding map of string-Logical_Switch pairs
static_routes map of string-string pairs
acl_binding map of string-ACL pairs
Identification:
name string (must be unique within
table)
description string
Error Notification:
LR_fault_status : invalid_ACL_binding
none
LR_fault_status : unspecified_fault
none
Common Column:
other_config map of string-string pairs
Details:
switch_binding: map of string-Logical_Switch pairs
Maps from an IPv4 or IPv6 address prefix in CIDR notation
to a logical switch. Multiple prefixes may map to the same
switch. By writing a 32-bit (or 128-bit for v6) address
with a /N prefix length, both the router's interface
address and the subnet prefix can be configured. For
example, 192.68.1.1/24 creates a /24 subnet for the
logical switch attached to the interface and assigns the
address 192.68.1.1 to the router interface.
static_routes: map of string-string pairs
One or more static routes, mapping IP prefixes to next hop
IP addresses.
acl_binding: map of string-ACL pairs
Maps ACLs to logical router interfaces. The router
interfaces are indicated using IP address notation, and
must be the same interfaces created in the switch_binding
column. For example, an ACL could be associated with the
logical router interface with an address of 192.68.1.1 as
defined in the example above.
Identification:
name: string (must be unique within table)
Symbolic name for the logical router.
description: string
An extended description for the logical router.
Error Notification:
An entry in this column indicates to the NVC that the HSC has
encountered a fault in configuring state related to the logical
router.
LR_fault_status : invalid_ACL_binding: none
Indicates that an error has occurred in associating an ACL
with a logical router port.
LR_fault_status : unspecified_fault: none
Indicates that an error has occurred in configuring the
logical router but that no more specific information is
available.
Common Column:
The overall purpose of this column is described under Common
Column at the beginning of this document.
other_config: map of string-string pairs
