обзор пространств имен монтирования Linux (overview of Linux mount namespaces)
Примечание (Note)
The propagation type assigned to a new mount depends on the
propagation type of the parent mount. If the mount has a parent
(i.e., it is a non-root mount point) and the propagation type of
the parent is MS_SHARED, then the propagation type of the new
mount is also MS_SHARED. Otherwise, the propagation type of the
new mount is MS_PRIVATE.
Notwithstanding the fact that the default propagation type for
new mount is in many cases MS_PRIVATE, MS_SHARED is typically
more useful. For this reason, systemd(1) automatically remounts
all mounts as MS_SHARED on system startup. Thus, on most modern
systems, the default propagation type is in practice MS_SHARED.
Since, when one uses unshare(1) to create a mount namespace, the
goal is commonly to provide full isolation of the mounts in the
new namespace, unshare(1) (since util-linux version 2.27) in turn
reverses the step performed by systemd(1), by making all mounts
private in the new namespace. That is, unshare(1) performs the
equivalent of the following in the new mount namespace:
mount --make-rprivate /
To prevent this, one can use the --propagation unchanged option
to unshare(1).
An application that creates a new mount namespace directly using
clone(2) or unshare(2) may desire to prevent propagation of mount
events to other mount namespaces (as is done by unshare(1)).
This can be done by changing the propagation type of mounts in
the new namespace to either MS_SLAVE or MS_PRIVATE, using a call
such as the following:
mount(NULL, "/", MS_SLAVE | MS_REC, NULL);
For a discussion of propagation types when moving mounts
(MS_MOVE) and creating bind mounts (MS_BIND), see
Documentation/filesystems/sharedsubtree.txt.
Restrictions on mount namespaces
Note the following points with respect to mount namespaces:
[1] Each mount namespace has an owner user namespace. As
explained above, when a new mount namespace is created, its
mount list is initialized as a copy of the mount list of
another mount namespace. If the new namespace and the
namespace from which the mount list was copied are owned by
different user namespaces, then the new mount namespace is
considered less privileged.
[2] When creating a less privileged mount namespace, shared
mounts are reduced to slave mounts. This ensures that
mappings performed in less privileged mount namespaces will
not propagate to more privileged mount namespaces.
[3] Mounts that come as a single unit from a more privileged
mount namespace are locked together and may not be separated
in a less privileged mount namespace. (The unshare(2)
CLONE_NEWNS operation brings across all of the mounts from
the original mount namespace as a single unit, and recursive
mounts that propagate between mount namespaces propagate as a
single unit.)
In this context, "may not be separated" means that the mounts
are locked so that they may not be individually unmounted.
Consider the following example:
$ sudo sh
# mount --bind /dev/null /etc/shadow
# cat /etc/shadow # Produces no output
The above steps, performed in a more privileged mount
namespace, have created a bind mount that obscures the
contents of the shadow password file, /etc/shadow. For
security reasons, it should not be possible to unmount that
mount in a less privileged mount namespace, since that would
reveal the contents of /etc/shadow.
Suppose we now create a new mount namespace owned by a new
user namespace. The new mount namespace will inherit copies
of all of the mounts from the previous mount namespace.
However, those mounts will be locked because the new mount
namespace is less privileged. Consequently, an attempt to
unmount the mount fails as show in the following step:
# unshare --user --map-root-user --mount \
strace -o /tmp/log \
umount /mnt/dir
umount: /etc/shadow: not mounted.
# grep '^umount' /tmp/log
umount2("/etc/shadow", 0) = -1 EINVAL (Invalid argument)
The error message from mount(8) is a little confusing, but
the strace(1) output reveals that the underlying umount2(2)
system call failed with the error EINVAL, which is the error
that the kernel returns to indicate that the mount is locked.
Note, however, that it is possible to stack (and unstack) a
mount on top of one of the inherited locked mounts in a less
privileged mount namespace:
# echo 'aaaaa' > /tmp/a # File to mount onto /etc/shadow
# unshare --user --map-root-user --mount \
sh -c 'mount --bind /tmp/a /etc/shadow; cat /etc/shadow'
aaaaa
# umount /etc/shadow
The final umount(8) command above, which is performed in the
initial mount namespace, makes the original /etc/shadow file
once more visible in that namespace.
[4] Following on from point [3], note that it is possible to
unmount an entire subtree of mounts that propagated as a unit
into a less privileged mount namespace, as illustrated in the
following example.
First, we create new user and mount namespaces using
unshare(1). In the new mount namespace, the propagation type
of all mounts is set to private. We then create a shared
bind mount at /mnt, and a small hierarchy of mounts
underneath that mount.
$ PS1='ns1# ' sudo unshare --user --map-root-user \
--mount --propagation private bash
ns1# echo $$ # We need the PID of this shell later
778501
ns1# mount --make-shared --bind /mnt /mnt
ns1# mkdir /mnt/x
ns1# mount --make-private -t tmpfs none /mnt/x
ns1# mkdir /mnt/x/y
ns1# mount --make-private -t tmpfs none /mnt/x/y
ns1# grep /mnt /proc/self/mountinfo | sed 's/ - .*//'
986 83 8:5 /mnt /mnt rw,relatime shared:344
989 986 0:56 / /mnt/x rw,relatime
990 989 0:57 / /mnt/x/y rw,relatime
Continuing in the same shell session, we then create a second
shell in a new user namespace and a new (less privileged)
mount namespace and check the state of the propagated mounts
rooted at /mnt.
ns1# PS1='ns2# ' unshare --user --map-root-user \
--mount --propagation unchanged bash
ns2# grep /mnt /proc/self/mountinfo | sed 's/ - .*//'
1239 1204 8:5 /mnt /mnt rw,relatime master:344
1240 1239 0:56 / /mnt/x rw,relatime
1241 1240 0:57 / /mnt/x/y rw,relatime
Of note in the above output is that the propagation type of
the mount /mnt has been reduced to slave, as explained in
point [2]. This means that submount events will propagate
from the master /mnt in "ns1", but propagation will not occur
in the opposite direction.
From a separate terminal window, we then use nsenter(1) to
enter the mount and user namespaces corresponding to "ns1".
In that terminal window, we then recursively bind mount
/mnt/x at the location /mnt/ppp.
$ PS1='ns3# ' sudo nsenter -t 778501 --user --mount
ns3# mount --rbind --make-private /mnt/x /mnt/ppp
ns3# grep /mnt /proc/self/mountinfo | sed 's/ - .*//'
986 83 8:5 /mnt /mnt rw,relatime shared:344
989 986 0:56 / /mnt/x rw,relatime
990 989 0:57 / /mnt/x/y rw,relatime
1242 986 0:56 / /mnt/ppp rw,relatime
1243 1242 0:57 / /mnt/ppp/y rw,relatime shared:518
Because the propagation type of the parent mount, /mnt, was
shared, the recursive bind mount propagated a small subtree
of mounts under the slave mount /mnt into "ns2", as can be
verified by executing the following command in that shell
session:
ns2# grep /mnt /proc/self/mountinfo | sed 's/ - .*//'
1239 1204 8:5 /mnt /mnt rw,relatime master:344
1240 1239 0:56 / /mnt/x rw,relatime
1241 1240 0:57 / /mnt/x/y rw,relatime
1244 1239 0:56 / /mnt/ppp rw,relatime
1245 1244 0:57 / /mnt/ppp/y rw,relatime master:518
While it is not possible to unmount a part of the propagated
subtree (/mnt/ppp/y) in "ns2", it is possible to unmount the
entire subtree, as shown by the following commands:
ns2# umount /mnt/ppp/y
umount: /mnt/ppp/y: not mounted.
ns2# umount -l /mnt/ppp | sed 's/ - .*//' # Succeeds...
ns2# grep /mnt /proc/self/mountinfo
1239 1204 8:5 /mnt /mnt rw,relatime master:344
1240 1239 0:56 / /mnt/x rw,relatime
1241 1240 0:57 / /mnt/x/y rw,relatime
[5] The mount(2) flags MS_RDONLY, MS_NOSUID, MS_NOEXEC, and the
"atime" flags (MS_NOATIME, MS_NODIRATIME, MS_RELATIME)
settings become locked when propagated from a more privileged
to a less privileged mount namespace, and may not be changed
in the less privileged mount namespace.
This point is illustrated in the following example where, in
a more privileged mount namespace, we create a bind mount
that is marked as read-only. For security reasons, it should
not be possible to make the mount writable in a less
privileged mount namespace, and indeed the kernel prevents
this:
$ sudo mkdir /mnt/dir
$ sudo mount --bind -o ro /some/path /mnt/dir
$ sudo unshare --user --map-root-user --mount \
mount -o remount,rw /mnt/dir
mount: /mnt/dir: permission denied.
[6] A file or directory that is a mount point in one namespace
that is not a mount point in another namespace, may be
renamed, unlinked, or removed (rmdir(2)) in the mount
namespace in which it is not a mount point (subject to the
usual permission checks). Consequently, the mount point is
removed in the mount namespace where it was a mount point.
Previously (before Linux 3.18), attempting to unlink, rename,
or remove a file or directory that was a mount point in
another mount namespace would result in the error EBUSY.
That behavior had technical problems of enforcement (e.g.,
for NFS) and permitted denial-of-service attacks against more
privileged users (i.e., preventing individual files from
being updated by bind mounting on top of them).
