архитектура открытой виртуальной сети (Open Virtual Network architecture)
Описание (Description)
OVN, the Open Virtual Network, is a system to support virtual
network abstraction. OVN complements the existing capabilities of
OVS to add native support for virtual network abstractions, such
as virtual L2 and L3 overlays and security groups. Services such
as DHCP are also desirable features. Just like OVS, OVN's design
goal is to have a production-quality implementation that can
operate at significant scale.
An OVN deployment consists of several components:
• A Cloud Management System (CMS), which is OVN's
ultimate client (via its users and administrators).
OVN integration requires installing a CMS-specific
plugin and related software (see below). OVN
initially targets OpenStack as CMS.
We generally speak of ``the'' CMS, but one can
imagine scenarios in which multiple CMSes manage
different parts of an OVN deployment.
• An OVN Database physical or virtual node (or,
eventually, cluster) installed in a central
location.
• One or more (usually many) hypervisors. Hypervisors
must run Open vSwitch and implement the interface
described in IntegrationGuide.rst in the OVS source
tree. Any hypervisor platform supported by Open
vSwitch is acceptable.
• Zero or more gateways. A gateway extends a tunnel-
based logical network into a physical network by
bidirectionally forwarding packets between tunnels
and a physical Ethernet port. This allows non-
virtualized machines to participate in logical
networks. A gateway may be a physical host, a
virtual machine, or an ASIC-based hardware switch
that supports the vtep(5) schema.
Hypervisors and gateways are together called
transport node or chassis.
The diagram below shows how the major components of OVN and
related software interact. Starting at the top of the diagram, we
have:
• The Cloud Management System, as defined above.
• The OVN/CMS Plugin is the component of the CMS that
interfaces to OVN. In OpenStack, this is a Neutron
plugin. The plugin's main purpose is to translate
the CMS's notion of logical network configuration,
stored in the CMS's configuration database in a
CMS-specific format, into an intermediate
representation understood by OVN.
This component is necessarily CMS-specific, so a
new plugin needs to be developed for each CMS that
is integrated with OVN. All of the components below
this one in the diagram are CMS-independent.
• The OVN Northbound Database receives the
intermediate representation of logical network
configuration passed down by the OVN/CMS Plugin.
The database schema is meant to be ``impedance
matched'' with the concepts used in a CMS, so that
it directly supports notions of logical switches,
routers, ACLs, and so on. See ovn-nb(5) for
details.
The OVN Northbound Database has only two clients:
the OVN/CMS Plugin above it and ovn-northd below
it.
• ovn-northd(8) connects to the OVN Northbound
Database above it and the OVN Southbound Database
below it. It translates the logical network
configuration in terms of conventional network
concepts, taken from the OVN Northbound Database,
into logical datapath flows in the OVN Southbound
Database below it.
• The OVN Southbound Database is the center of the
system. Its clients are ovn-northd(8) above it and
ovn-controller(8) on every transport node below it.
The OVN Southbound Database contains three kinds of
data: Physical Network (PN) tables that specify how
to reach hypervisor and other nodes, Logical
Network (LN) tables that describe the logical
network in terms of ``logical datapath flows,'' and
Binding tables that link logical network
components' locations to the physical network. The
hypervisors populate the PN and Port_Binding
tables, whereas ovn-northd(8) populates the LN
tables.
OVN Southbound Database performance must scale with
the number of transport nodes. This will likely
require some work on ovsdb-server(1) as we
encounter bottlenecks. Clustering for availability
may be needed.
The remaining components are replicated onto each hypervisor:
• ovn-controller(8) is OVN's agent on each hypervisor
and software gateway. Northbound, it connects to
the OVN Southbound Database to learn about OVN
configuration and status and to populate the PN
table and the Chassis column in Binding table with
the hypervisor's status. Southbound, it connects to
ovs-vswitchd(8) as an OpenFlow controller, for
control over network traffic, and to the local
ovsdb-server(1) to allow it to monitor and control
Open vSwitch configuration.
• ovs-vswitchd(8) and ovsdb-server(1) are
conventional components of Open vSwitch.
CMS
|
|
+-----------|-----------+
| | |
| OVN/CMS Plugin |
| | |
| | |
| OVN Northbound DB |
| | |
| | |
| ovn-northd |
| | |
+-----------|-----------+
|
|
+-------------------+
| OVN Southbound DB |
+-------------------+
|
|
+------------------+------------------+
| | |
HV 1 | | HV n |
+---------------|---------------+ . +---------------|---------------+
| | | . | | |
| ovn-controller | . | ovn-controller |
| | | | . | | | |
| | | | | | | |
| ovs-vswitchd ovsdb-server | | ovs-vswitchd ovsdb-server |
| | | |
+-------------------------------+ +-------------------------------+
Information Flow in OVN
Configuration data in OVN flows from north to south. The CMS,
through its OVN/CMS plugin, passes the logical network
configuration to ovn-northd via the northbound database. In turn,
ovn-northd compiles the configuration into a lower-level form and
passes it to all of the chassis via the southbound database.
Status information in OVN flows from south to north. OVN
currently provides only a few forms of status information. First,
ovn-northd populates the up column in the northbound
Logical_Switch_Port table: if a logical port's chassis column in
the southbound Port_Binding table is nonempty, it sets up to
true, otherwise to false. This allows the CMS to detect when a
VM's networking has come up.
Second, OVN provides feedback to the CMS on the realization of
its configuration, that is, whether the configuration provided by
the CMS has taken effect. This feature requires the CMS to
participate in a sequence number protocol, which works the
following way:
1. When the CMS updates the configuration in the
northbound database, as part of the same transaction,
it increments the value of the nb_cfg column in the
NB_Global table. (This is only necessary if the CMS
wants to know when the configuration has been
realized.)
2. When ovn-northd updates the southbound database based
on a given snapshot of the northbound database, it
copies nb_cfg from northbound NB_Global into the
southbound database SB_Global table, as part of the
same transaction. (Thus, an observer monitoring both
databases can determine when the southbound database
is caught up with the northbound.)
3. After ovn-northd receives confirmation from the
southbound database server that its changes have
committed, it updates sb_cfg in the northbound
NB_Global table to the nb_cfg version that was pushed
down. (Thus, the CMS or another observer can determine
when the southbound database is caught up without a
connection to the southbound database.)
4. The ovn-controller process on each chassis receives
the updated southbound database, with the updated
nb_cfg. This process in turn updates the physical
flows installed in the chassis's Open vSwitch
instances. When it receives confirmation from Open
vSwitch that the physical flows have been updated, it
updates nb_cfg in its own Chassis record in the
southbound database.
5. ovn-northd monitors the nb_cfg column in all of the
Chassis records in the southbound database. It keeps
track of the minimum value among all the records and
copies it into the hv_cfg column in the northbound
NB_Global table. (Thus, the CMS or another observer
can determine when all of the hypervisors have caught
up to the northbound configuration.)
Chassis Setup
Each chassis in an OVN deployment must be configured with an Open
vSwitch bridge dedicated for OVN's use, called the integration
bridge. System startup scripts may create this bridge prior to
starting ovn-controller if desired. If this bridge does not exist
when ovn-controller starts, it will be created automatically with
the default configuration suggested below. The ports on the
integration bridge include:
• On any chassis, tunnel ports that OVN uses to
maintain logical network connectivity.
ovn-controller adds, updates, and removes these
tunnel ports.
• On a hypervisor, any VIFs that are to be attached
to logical networks. The hypervisor itself, or the
integration between Open vSwitch and the hypervisor
(described in IntegrationGuide.rst) takes care of
this. (This is not part of OVN or new to OVN; this
is pre-existing integration work that has already
been done on hypervisors that support OVS.)
• On a gateway, the physical port used for logical
network connectivity. System startup scripts add
this port to the bridge prior to starting
ovn-controller. This can be a patch port to another
bridge, instead of a physical port, in more
sophisticated setups.
Other ports should not be attached to the integration bridge. In
particular, physical ports attached to the underlay network (as
opposed to gateway ports, which are physical ports attached to
logical networks) must not be attached to the integration bridge.
Underlay physical ports should instead be attached to a separate
Open vSwitch bridge (they need not be attached to any bridge at
all, in fact).
The integration bridge should be configured as described below.
The effect of each of these settings is documented in
ovs-vswitchd.conf.db(5):
fail-mode=secure
Avoids switching packets between isolated logical
networks before ovn-controller starts up. See
Controller Failure Settings in ovs-vsctl(8) for
more information.
other-config:disable-in-band=true
Suppresses in-band control flows for the
integration bridge. It would be unusual for such
flows to show up anyway, because OVN uses a local
controller (over a Unix domain socket) instead of a
remote controller. It's possible, however, for some
other bridge in the same system to have an in-band
remote controller, and in that case this suppresses
the flows that in-band control would ordinarily set
up. Refer to the documentation for more
information.
The customary name for the integration bridge is br-int, but
another name may be used.
Logical Networks
A logical network implements the same concepts as physical
networks, but they are insulated from the physical network with
tunnels or other encapsulations. This allows logical networks to
have separate IP and other address spaces that overlap, without
conflicting, with those used for physical networks. Logical
network topologies can be arranged without regard for the
topologies of the physical networks on which they run.
Logical network concepts in OVN include:
• Logical switches, the logical version of Ethernet
switches.
• Logical routers, the logical version of IP routers.
Logical switches and routers can be connected into
sophisticated topologies.
• Logical datapaths are the logical version of an
OpenFlow switch. Logical switches and routers are
both implemented as logical datapaths.
• Logical ports represent the points of connectivity
in and out of logical switches and logical routers.
Some common types of logical ports are:
• Logical ports representing VIFs.
• Localnet ports represent the points of
connectivity between logical switches and
the physical network. They are implemented
as OVS patch ports between the integration
bridge and the separate Open vSwitch bridge
that underlay physical ports attach to.
• Logical patch ports represent the points of
connectivity between logical switches and
logical routers, and in some cases between
peer logical routers. There is a pair of
logical patch ports at each such point of
connectivity, one on each side.
• Localport ports represent the points of
local connectivity between logical switches
and VIFs. These ports are present in every
chassis (not bound to any particular one)
and traffic from them will never go through
a tunnel. A localport is expected to only
generate traffic destined for a local
destination, typically in response to a
request it received. One use case is how
OpenStack Neutron uses a localport port for
serving metadata to VM's residing on every
hypervisor. A metadata proxy process is
attached to this port on every host and all
VM's within the same network will reach it
at the same IP/MAC address without any
traffic being sent over a tunnel. Further
details can be seen at
https://docs.openstack.org/developer/networking-ovn/design/metadata_api.html.
Life Cycle of a VIF
Tables and their schemas presented in isolation are difficult to
understand. Here's an example.
A VIF on a hypervisor is a virtual network interface attached
either to a VM or a container running directly on that hypervisor
(This is different from the interface of a container running
inside a VM).
The steps in this example refer often to details of the OVN and
OVN Northbound database schemas. Please see ovn-sb(5) and
ovn-nb(5), respectively, for the full story on these databases.
1. A VIF's life cycle begins when a CMS administrator
creates a new VIF using the CMS user interface or API
and adds it to a switch (one implemented by OVN as a
logical switch). The CMS updates its own
configuration. This includes associating unique,
persistent identifier vif-id and Ethernet address mac
with the VIF.
2. The CMS plugin updates the OVN Northbound database to
include the new VIF, by adding a row to the
Logical_Switch_Port table. In the new row, name is
vif-id, mac is mac, switch points to the OVN logical
switch's Logical_Switch record, and other columns are
initialized appropriately.
3. ovn-northd receives the OVN Northbound database
update. In turn, it makes the corresponding updates to
the OVN Southbound database, by adding rows to the OVN
Southbound database Logical_Flow table to reflect the
new port, e.g. add a flow to recognize that packets
destined to the new port's MAC address should be
delivered to it, and update the flow that delivers
broadcast and multicast packets to include the new
port. It also creates a record in the Binding table
and populates all its columns except the column that
identifies the chassis.
4. On every hypervisor, ovn-controller receives the
Logical_Flow table updates that ovn-northd made in the
previous step. As long as the VM that owns the VIF is
powered off, ovn-controller cannot do much; it cannot,
for example, arrange to send packets to or receive
packets from the VIF, because the VIF does not
actually exist anywhere.
5. Eventually, a user powers on the VM that owns the VIF.
On the hypervisor where the VM is powered on, the
integration between the hypervisor and Open vSwitch
(described in IntegrationGuide.rst) adds the VIF to
the OVN integration bridge and stores vif-id in
external_ids:iface-id to indicate that the interface
is an instantiation of the new VIF. (None of this code
is new in OVN; this is pre-existing integration work
that has already been done on hypervisors that support
OVS.)
6. On the hypervisor where the VM is powered on,
ovn-controller notices external_ids:iface-id in the
new Interface. In response, in the OVN Southbound DB,
it updates the Binding table's chassis column for the
row that links the logical port from external_ids:
iface-id to the hypervisor. Afterward, ovn-controller
updates the local hypervisor's OpenFlow tables so that
packets to and from the VIF are properly handled.
7. Some CMS systems, including OpenStack, fully start a
VM only when its networking is ready. To support this,
ovn-northd notices the chassis column updated for the
row in Binding table and pushes this upward by
updating the up column in the OVN Northbound
database's Logical_Switch_Port table to indicate that
the VIF is now up. The CMS, if it uses this feature,
can then react by allowing the VM's execution to
proceed.
8. On every hypervisor but the one where the VIF resides,
ovn-controller notices the completely populated row in
the Binding table. This provides ovn-controller the
physical location of the logical port, so each
instance updates the OpenFlow tables of its switch
(based on logical datapath flows in the OVN DB
Logical_Flow table) so that packets to and from the
VIF can be properly handled via tunnels.
9. Eventually, a user powers off the VM that owns the
VIF. On the hypervisor where the VM was powered off,
the VIF is deleted from the OVN integration bridge.
10. On the hypervisor where the VM was powered off,
ovn-controller notices that the VIF was deleted. In
response, it removes the Chassis column content in the
Binding table for the logical port.
11. On every hypervisor, ovn-controller notices the empty
Chassis column in the Binding table's row for the
logical port. This means that ovn-controller no longer
knows the physical location of the logical port, so
each instance updates its OpenFlow table to reflect
that.
12. Eventually, when the VIF (or its entire VM) is no
longer needed by anyone, an administrator deletes the
VIF using the CMS user interface or API. The CMS
updates its own configuration.
13. The CMS plugin removes the VIF from the OVN Northbound
database, by deleting its row in the
Logical_Switch_Port table.
14. ovn-northd receives the OVN Northbound update and in
turn updates the OVN Southbound database accordingly,
by removing or updating the rows from the OVN
Southbound database Logical_Flow table and Binding
table that were related to the now-destroyed VIF.
15. On every hypervisor, ovn-controller receives the
Logical_Flow table updates that ovn-northd made in the
previous step. ovn-controller updates OpenFlow tables
to reflect the update, although there may not be much
to do, since the VIF had already become unreachable
when it was removed from the Binding table in a
previous step.
Life Cycle of a Container Interface Inside a VM
OVN provides virtual network abstractions by converting
information written in OVN_NB database to OpenFlow flows in each
hypervisor. Secure virtual networking for multi-tenants can only
be provided if OVN controller is the only entity that can modify
flows in Open vSwitch. When the Open vSwitch integration bridge
resides in the hypervisor, it is a fair assumption to make that
tenant workloads running inside VMs cannot make any changes to
Open vSwitch flows.
If the infrastructure provider trusts the applications inside the
containers not to break out and modify the Open vSwitch flows,
then containers can be run in hypervisors. This is also the case
when containers are run inside the VMs and Open vSwitch
integration bridge with flows added by OVN controller resides in
the same VM. For both the above cases, the workflow is the same
as explained with an example in the previous section ("Life Cycle
of a VIF").
This section talks about the life cycle of a container interface
(CIF) when containers are created in the VMs and the Open vSwitch
integration bridge resides inside the hypervisor. In this case,
even if a container application breaks out, other tenants are not
affected because the containers running inside the VMs cannot
modify the flows in the Open vSwitch integration bridge.
When multiple containers are created inside a VM, there are
multiple CIFs associated with them. The network traffic
associated with these CIFs need to reach the Open vSwitch
integration bridge running in the hypervisor for OVN to support
virtual network abstractions. OVN should also be able to
distinguish network traffic coming from different CIFs. There are
two ways to distinguish network traffic of CIFs.
One way is to provide one VIF for every CIF (1:1 model). This
means that there could be a lot of network devices in the
hypervisor. This would slow down OVS because of all the
additional CPU cycles needed for the management of all the VIFs.
It would also mean that the entity creating the containers in a
VM should also be able to create the corresponding VIFs in the
hypervisor.
The second way is to provide a single VIF for all the CIFs
(1:many model). OVN could then distinguish network traffic coming
from different CIFs via a tag written in every packet. OVN uses
this mechanism and uses VLAN as the tagging mechanism.
1. A CIF's life cycle begins when a container is spawned
inside a VM by the either the same CMS that created
the VM or a tenant that owns that VM or even a
container Orchestration System that is different than
the CMS that initially created the VM. Whoever the
entity is, it will need to know the vif-id that is
associated with the network interface of the VM
through which the container interface's network
traffic is expected to go through. The entity that
creates the container interface will also need to
choose an unused VLAN inside that VM.
2. The container spawning entity (either directly or
through the CMS that manages the underlying
infrastructure) updates the OVN Northbound database to
include the new CIF, by adding a row to the
Logical_Switch_Port table. In the new row, name is any
unique identifier, parent_name is the vif-id of the VM
through which the CIF's network traffic is expected to
go through and the tag is the VLAN tag that identifies
the network traffic of that CIF.
3. ovn-northd receives the OVN Northbound database
update. In turn, it makes the corresponding updates to
the OVN Southbound database, by adding rows to the OVN
Southbound database's Logical_Flow table to reflect
the new port and also by creating a new row in the
Binding table and populating all its columns except
the column that identifies the chassis.
4. On every hypervisor, ovn-controller subscribes to the
changes in the Binding table. When a new row is
created by ovn-northd that includes a value in
parent_port column of Binding table, the
ovn-controller in the hypervisor whose OVN integration
bridge has that same value in vif-id in
external_ids:iface-id updates the local hypervisor's
OpenFlow tables so that packets to and from the VIF
with the particular VLAN tag are properly handled.
Afterward it updates the chassis column of the Binding
to reflect the physical location.
5. One can only start the application inside the
container after the underlying network is ready. To
support this, ovn-northd notices the updated chassis
column in Binding table and updates the up column in
the OVN Northbound database's Logical_Switch_Port
table to indicate that the CIF is now up. The entity
responsible to start the container application queries
this value and starts the application.
6. Eventually the entity that created and started the
container, stops it. The entity, through the CMS (or
directly) deletes its row in the Logical_Switch_Port
table.
7. ovn-northd receives the OVN Northbound update and in
turn updates the OVN Southbound database accordingly,
by removing or updating the rows from the OVN
Southbound database Logical_Flow table that were
related to the now-destroyed CIF. It also deletes the
row in the Binding table for that CIF.
8. On every hypervisor, ovn-controller receives the
Logical_Flow table updates that ovn-northd made in the
previous step. ovn-controller updates OpenFlow tables
to reflect the update.
Architectural Physical Life Cycle of a Packet
This section describes how a packet travels from one virtual
machine or container to another through OVN. This description
focuses on the physical treatment of a packet; for a description
of the logical life cycle of a packet, please refer to the
Logical_Flow table in ovn-sb(5).
This section mentions several data and metadata fields, for
clarity summarized here:
tunnel key
When OVN encapsulates a packet in Geneve or another
tunnel, it attaches extra data to it to allow the
receiving OVN instance to process it correctly.
This takes different forms depending on the
particular encapsulation, but in each case we refer
to it here as the ``tunnel key.'' See Tunnel
Encapsulations, below, for details.
logical datapath field
A field that denotes the logical datapath through
which a packet is being processed. OVN uses the
field that OpenFlow 1.1+ simply (and confusingly)
calls ``metadata'' to store the logical datapath.
(This field is passed across tunnels as part of the
tunnel key.)
logical input port field
A field that denotes the logical port from which
the packet entered the logical datapath. OVN stores
this in Open vSwitch extension register number 14.
Geneve and STT tunnels pass this field as part of
the tunnel key. Although VXLAN tunnels do not
explicitly carry a logical input port, OVN only
uses VXLAN to communicate with gateways that from
OVN's perspective consist of only a single logical
port, so that OVN can set the logical input port
field to this one on ingress to the OVN logical
pipeline.
logical output port field
A field that denotes the logical port from which
the packet will leave the logical datapath. This is
initialized to 0 at the beginning of the logical
ingress pipeline. OVN stores this in Open vSwitch
extension register number 15.
Geneve and STT tunnels pass this field as part of
the tunnel key. VXLAN tunnels do not transmit the
logical output port field. Since VXLAN tunnels do
not carry a logical output port field in the tunnel
key, when a packet is received from VXLAN tunnel by
an OVN hypervisor, the packet is resubmitted to
table 8 to determine the output port(s); when the
packet reaches table 32, these packets are
resubmitted to table 33 for local delivery by
checking a MLF_RCV_FROM_VXLAN flag, which is set
when the packet arrives from a VXLAN tunnel.
conntrack zone field for logical ports
A field that denotes the connection tracking zone
for logical ports. The value only has local
significance and is not meaningful between chassis.
This is initialized to 0 at the beginning of the
logical ingress pipeline. OVN stores this in Open
vSwitch extension register number 13.
conntrack zone fields for routers
Fields that denote the connection tracking zones
for routers. These values only have local
significance and are not meaningful between
chassis. OVN stores the zone information for
DNATting in Open vSwitch extension register number
11 and zone information for SNATing in Open vSwitch
extension register number 12.
logical flow flags
The logical flags are intended to handle keeping
context between tables in order to decide which
rules in subsequent tables are matched. These
values only have local significance and are not
meaningful between chassis. OVN stores the logical
flags in Open vSwitch extension register number 10.
VLAN ID
The VLAN ID is used as an interface between OVN and
containers nested inside a VM (see Life Cycle of a
container interface inside a VM, above, for more
information).
Initially, a VM or container on the ingress hypervisor sends a
packet on a port attached to the OVN integration bridge. Then:
1. OpenFlow table 0 performs physical-to-logical
translation. It matches the packet's ingress port. Its
actions annotate the packet with logical metadata, by
setting the logical datapath field to identify the
logical datapath that the packet is traversing and the
logical input port field to identify the ingress port.
Then it resubmits to table 8 to enter the logical
ingress pipeline.
Packets that originate from a container nested within
a VM are treated in a slightly different way. The
originating container can be distinguished based on
the VIF-specific VLAN ID, so the physical-to-logical
translation flows additionally match on VLAN ID and
the actions strip the VLAN header. Following this
step, OVN treats packets from containers just like any
other packets.
Table 0 also processes packets that arrive from other
chassis. It distinguishes them from other packets by
ingress port, which is a tunnel. As with packets just
entering the OVN pipeline, the actions annotate these
packets with logical datapath and logical ingress port
metadata. In addition, the actions set the logical
output port field, which is available because in OVN
tunneling occurs after the logical output port is
known. These three pieces of information are obtained
from the tunnel encapsulation metadata (see Tunnel
Encapsulations for encoding details). Then the actions
resubmit to table 33 to enter the logical egress
pipeline.
2. OpenFlow tables 8 through 31 execute the logical
ingress pipeline from the Logical_Flow table in the
OVN Southbound database. These tables are expressed
entirely in terms of logical concepts like logical
ports and logical datapaths. A big part of
ovn-controller's job is to translate them into
equivalent OpenFlow (in particular it translates the
table numbers: Logical_Flow tables 0 through 23 become
OpenFlow tables 8 through 31).
Each logical flow maps to one or more OpenFlow flows.
An actual packet ordinarily matches only one of these,
although in some cases it can match more than one of
these flows (which is not a problem because all of
them have the same actions). ovn-controller uses the
first 32 bits of the logical flow's UUID as the cookie
for its OpenFlow flow or flows. (This is not
necessarily unique, since the first 32 bits of a
logical flow's UUID is not necessarily unique.)
Some logical flows can map to the Open vSwitch
``conjunctive match'' extension (see ovs-fields(7)).
Flows with a conjunction action use an OpenFlow cookie
of 0, because they can correspond to multiple logical
flows. The OpenFlow flow for a conjunctive match
includes a match on conj_id.
Some logical flows may not be represented in the
OpenFlow tables on a given hypervisor, if they could
not be used on that hypervisor. For example, if no VIF
in a logical switch resides on a given hypervisor, and
the logical switch is not otherwise reachable on that
hypervisor (e.g. over a series of hops through logical
switches and routers starting from a VIF on the
hypervisor), then the logical flow may not be
represented there.
Most OVN actions have fairly obvious implementations
in OpenFlow (with OVS extensions), e.g. next; is
implemented as resubmit, field = constant; as
set_field. A few are worth describing in more detail:
output:
Implemented by resubmitting the packet to table
32. If the pipeline executes more than one
output action, then each one is separately
resubmitted to table 32. This can be used to
send multiple copies of the packet to multiple
ports. (If the packet was not modified between
the output actions, and some of the copies are
destined to the same hypervisor, then using a
logical multicast output port would save
bandwidth between hypervisors.)
get_arp(P, A);
get_nd(P, A);
Implemented by storing arguments into OpenFlow
fields, then resubmitting to table 66, which
ovn-controller populates with flows generated
from the MAC_Binding table in the OVN Southbound
database. If there is a match in table 66, then
its actions store the bound MAC in the Ethernet
destination address field.
(The OpenFlow actions save and restore the
OpenFlow fields used for the arguments, so that
the OVN actions do not have to be aware of this
temporary use.)
put_arp(P, A, E);
put_nd(P, A, E);
Implemented by storing the arguments into
OpenFlow fields, then outputting a packet to
ovn-controller, which updates the MAC_Binding
table.
(The OpenFlow actions save and restore the
OpenFlow fields used for the arguments, so that
the OVN actions do not have to be aware of this
temporary use.)
3. OpenFlow tables 32 through 47 implement the output
action in the logical ingress pipeline. Specifically,
table 32 handles packets to remote hypervisors, table
33 handles packets to the local hypervisor, and table
34 checks whether packets whose logical ingress and
egress port are the same should be discarded.
Logical patch ports are a special case. Logical patch
ports do not have a physical location and effectively
reside on every hypervisor. Thus, flow table 33, for
output to ports on the local hypervisor, naturally
implements output to unicast logical patch ports too.
However, applying the same logic to a logical patch
port that is part of a logical multicast group yields
packet duplication, because each hypervisor that
contains a logical port in the multicast group will
also output the packet to the logical patch port.
Thus, multicast groups implement output to logical
patch ports in table 32.
Each flow in table 32 matches on a logical output port
for unicast or multicast logical ports that include a
logical port on a remote hypervisor. Each flow's
actions implement sending a packet to the port it
matches. For unicast logical output ports on remote
hypervisors, the actions set the tunnel key to the
correct value, then send the packet on the tunnel port
to the correct hypervisor. (When the remote hypervisor
receives the packet, table 0 there will recognize it
as a tunneled packet and pass it along to table 33.)
For multicast logical output ports, the actions send
one copy of the packet to each remote hypervisor, in
the same way as for unicast destinations. If a
multicast group includes a logical port or ports on
the local hypervisor, then its actions also resubmit
to table 33. Table 32 also includes:
• A higher-priority rule to match packets
received from VXLAN tunnels, based on flag
MLF_RCV_FROM_VXLAN, and resubmit these packets
to table 33 for local delivery. Packets
received from VXLAN tunnels reach here because
of a lack of logical output port field in the
tunnel key and thus these packets needed to be
submitted to table 8 to determine the output
port.
• A higher-priority rule to match packets
received from ports of type localport, based on
the logical input port, and resubmit these
packets to table 33 for local delivery. Ports
of type localport exist on every hypervisor and
by definition their traffic should never go out
through a tunnel.
• A higher-priority rule to match packets that
have the MLF_LOCAL_ONLY logical flow flag set,
and whose destination is a multicast address.
This flag indicates that the packet should not
be delivered to remote hypervisors, even if the
multicast destination includes ports on remote
hypervisors. This flag is used when
ovn-controller is the originator of the
multicast packet. Since each ovn-controller
instance is originating these packets, the
packets only need to be delivered to local
ports.
• A fallback flow that resubmits to table 33 if
there is no other match.
Flows in table 33 resemble those in table 32 but for
logical ports that reside locally rather than
remotely. For unicast logical output ports on the
local hypervisor, the actions just resubmit to table
34. For multicast output ports that include one or
more logical ports on the local hypervisor, for each
such logical port P, the actions change the logical
output port to P, then resubmit to table 34.
A special case is that when a localnet port exists on
the datapath, remote port is connected by switching to
the localnet port. In this case, instead of adding a
flow in table 32 to reach the remote port, a flow is
added in table 33 to switch the logical outport to the
localnet port, and resubmit to table 33 as if it were
unicasted to a logical port on the local hypervisor.
Table 34 matches and drops packets for which the
logical input and output ports are the same and the
MLF_ALLOW_LOOPBACK flag is not set. It resubmits other
packets to table 40.
4. OpenFlow tables 40 through 63 execute the logical
egress pipeline from the Logical_Flow table in the OVN
Southbound database. The egress pipeline can perform a
final stage of validation before packet delivery.
Eventually, it may execute an output action, which
ovn-controller implements by resubmitting to table 64.
A packet for which the pipeline never executes output
is effectively dropped (although it may have been
transmitted through a tunnel across a physical
network).
The egress pipeline cannot change the logical output
port or cause further tunneling.
5. Table 64 bypasses OpenFlow loopback when
MLF_ALLOW_LOOPBACK is set. Logical loopback was
handled in table 34, but OpenFlow by default also
prevents loopback to the OpenFlow ingress port. Thus,
when MLF_ALLOW_LOOPBACK is set, OpenFlow table 64
saves the OpenFlow ingress port, sets it to zero,
resubmits to table 65 for logical-to-physical
transformation, and then restores the OpenFlow ingress
port, effectively disabling OpenFlow loopback
prevents. When MLF_ALLOW_LOOPBACK is unset, table 64
flow simply resubmits to table 65.
6. OpenFlow table 65 performs logical-to-physical
translation, the opposite of table 0. It matches the
packet's logical egress port. Its actions output the
packet to the port attached to the OVN integration
bridge that represents that logical port. If the
logical egress port is a container nested with a VM,
then before sending the packet the actions push on a
VLAN header with an appropriate VLAN ID.
Logical Routers and Logical Patch Ports
Typically logical routers and logical patch ports do not have a
physical location and effectively reside on every hypervisor.
This is the case for logical patch ports between logical routers
and logical switches behind those logical routers, to which VMs
(and VIFs) attach.
Consider a packet sent from one virtual machine or container to
another VM or container that resides on a different subnet. The
packet will traverse tables 0 to 65 as described in the previous
section Architectural Physical Life Cycle of a Packet, using the
logical datapath representing the logical switch that the sender
is attached to. At table 32, the packet will use the fallback
flow that resubmits locally to table 33 on the same hypervisor.
In this case, all of the processing from table 0 to table 65
occurs on the hypervisor where the sender resides.
When the packet reaches table 65, the logical egress port is a
logical patch port. The implementation in table 65 differs
depending on the OVS version, although the observed behavior is
meant to be the same:
• In OVS versions 2.6 and earlier, table 65 outputs
to an OVS patch port that represents the logical
patch port. The packet re-enters the OpenFlow flow
table from the OVS patch port's peer in table 0,
which identifies the logical datapath and logical
input port based on the OVS patch port's OpenFlow
port number.
• In OVS versions 2.7 and later, the packet is cloned
and resubmitted directly to the first OpenFlow flow
table in the ingress pipeline, setting the logical
ingress port to the peer logical patch port, and
using the peer logical patch port's logical
datapath (that represents the logical router).
The packet re-enters the ingress pipeline in order to traverse
tables 8 to 65 again, this time using the logical datapath
representing the logical router. The processing continues as
described in the previous section Architectural Physical Life
Cycle of a Packet. When the packet reachs table 65, the logical
egress port will once again be a logical patch port. In the same
manner as described above, this logical patch port will cause the
packet to be resubmitted to OpenFlow tables 8 to 65, this time
using the logical datapath representing the logical switch that
the destination VM or container is attached to.
The packet traverses tables 8 to 65 a third and final time. If
the destination VM or container resides on a remote hypervisor,
then table 32 will send the packet on a tunnel port from the
sender's hypervisor to the remote hypervisor. Finally table 65
will output the packet directly to the destination VM or
container.
The following sections describe two exceptions, where logical
routers and/or logical patch ports are associated with a physical
location.
Gateway Routers
A gateway router is a logical router that is bound to a physical
location. This includes all of the logical patch ports of the
logical router, as well as all of the peer logical patch ports on
logical switches. In the OVN Southbound database, the
Port_Binding entries for these logical patch ports use the type
l3gateway rather than patch, in order to distinguish that these
logical patch ports are bound to a chassis.
When a hypervisor processes a packet on a logical datapath
representing a logical switch, and the logical egress port is a
l3gateway port representing connectivity to a gateway router, the
packet will match a flow in table 32 that sends the packet on a
tunnel port to the chassis where the gateway router resides. This
processing in table 32 is done in the same manner as for VIFs.
Gateway routers are typically used in between distributed logical
routers and physical networks. The distributed logical router and
the logical switches behind it, to which VMs and containers
attach, effectively reside on each hypervisor. The distributed
router and the gateway router are connected by another logical
switch, sometimes referred to as a join logical switch. On the
other side, the gateway router connects to another logical switch
that has a localnet port connecting to the physical network.
When using gateway routers, DNAT and SNAT rules are associated
with the gateway router, which provides a central location that
can handle one-to-many SNAT (aka IP masquerading).
Distributed Gateway Ports
Distributed gateway ports are logical router patch ports that
directly connect distributed logical routers to logical switches
with localnet ports.
The primary design goal of distributed gateway ports is to allow
as much traffic as possible to be handled locally on the
hypervisor where a VM or container resides. Whenever possible,
packets from the VM or container to the outside world should be
processed completely on that VM's or container's hypervisor,
eventually traversing a localnet port instance on that hypervisor
to the physical network. Whenever possible, packets from the
outside world to a VM or container should be directed through the
physical network directly to the VM's or container's hypervisor,
where the packet will enter the integration bridge through a
localnet port.
In order to allow for the distributed processing of packets
described in the paragraph above, distributed gateway ports need
to be logical patch ports that effectively reside on every
hypervisor, rather than l3gateway ports that are bound to a
particular chassis. However, the flows associated with
distributed gateway ports often need to be associated with
physical locations, for the following reasons:
• The physical network that the localnet port is
attached to typically uses L2 learning. Any
Ethernet address used over the distributed gateway
port must be restricted to a single physical
location so that upstream L2 learning is not
confused. Traffic sent out the distributed gateway
port towards the localnet port with a specific
Ethernet address must be sent out one specific
instance of the distributed gateway port on one
specific chassis. Traffic received from the
localnet port (or from a VIF on the same logical
switch as the localnet port) with a specific
Ethernet address must be directed to the logical
switch's patch port instance on that specific
chassis.
Due to the implications of L2 learning, the
Ethernet address and IP address of the distributed
gateway port need to be restricted to a single
physical location. For this reason, the user must
specify one chassis associated with the distributed
gateway port. Note that traffic traversing the
distributed gateway port using other Ethernet
addresses and IP addresses (e.g. one-to-one NAT) is
not restricted to this chassis.
Replies to ARP and ND requests must be restricted
to a single physical location, where the Ethernet
address in the reply resides. This includes ARP and
ND replies for the IP address of the distributed
gateway port, which are restricted to the chassis
that the user associated with the distributed
gateway port.
• In order to support one-to-many SNAT (aka IP
masquerading), where multiple logical IP addresses
spread across multiple chassis are mapped to a
single external IP address, it will be necessary to
handle some of the logical router processing on a
specific chassis in a centralized manner. Since the
SNAT external IP address is typically the
distributed gateway port IP address, and for
simplicity, the same chassis associated with the
distributed gateway port is used.
The details of flow restrictions to specific chassis are
described in the ovn-northd documentation.
While most of the physical location dependent aspects of
distributed gateway ports can be handled by restricting some
flows to specific chassis, one additional mechanism is required.
When a packet leaves the ingress pipeline and the logical egress
port is the distributed gateway port, one of two different sets
of actions is required at table 32:
• If the packet can be handled locally on the
sender's hypervisor (e.g. one-to-one NAT traffic),
then the packet should just be resubmitted locally
to table 33, in the normal manner for distributed
logical patch ports.
• However, if the packet needs to be handled on the
chassis associated with the distributed gateway
port (e.g. one-to-many SNAT traffic or non-NAT
traffic), then table 32 must send the packet on a
tunnel port to that chassis.
In order to trigger the second set of actions, the
chassisredirect type of southbound Port_Binding has been added.
Setting the logical egress port to the type chassisredirect
logical port is simply a way to indicate that although the packet
is destined for the distributed gateway port, it needs to be
redirected to a different chassis. At table 32, packets with this
logical egress port are sent to a specific chassis, in the same
way that table 32 directs packets whose logical egress port is a
VIF or a type l3gateway port to different chassis. Once the
packet arrives at that chassis, table 33 resets the logical
egress port to the value representing the distributed gateway
port. For each distributed gateway port, there is one type
chassisredirect port, in addition to the distributed logical
patch port representing the distributed gateway port.
High Availability for Distributed Gateway Ports
OVN allows you to specify a prioritized list of chassis for a
distributed gateway port. This is done by associating multiple
Gateway_Chassis rows with a Logical_Router_Port in the
OVN_Northbound database.
When multiple chassis have been specified for a gateway, all
chassis that may send packets to that gateway will enable BFD on
tunnels to all configured gateway chassis. The current master
chassis for the gateway is the highest priority gateway chassis
that is currently viewed as active based on BFD status.
For more information on L3 gateway high availability, please
refer to
http://docs.openvswitch.org/en/latest/topics/high-availability.
Multiple localnet logical switches connected to a Logical Router
It is possible to have multiple logical switches each with a
localnet port (representing physical networks) connected to a
logical router, in which one localnet logical switch may provide
the external connectivity via a distributed gateway port and rest
of the localnet logical switches use VLAN tagging in the physical
network. It is expected that ovn-bridge-mappings is configured
appropriately on the chassis for all these localnet networks.
East West routing
East-West routing between these localnet VLAN tagged logical
switches work almost the same way as normal logical switches.
When the VM sends such a packet, then:
1. It first enters the ingress pipeline, and then egress
pipeline of the source localnet logical switch
datapath. It then enters the ingress pipeline of the
logical router datapath via the logical router port in
the source chassis.
2. Routing decision is taken.
3. From the router datapath, packet enters the ingress
pipeline and then egress pipeline of the destination
localnet logical switch datapath and goes out of the
integration bridge to the provider bridge ( belonging
to the destination logical switch) via the localnet
port. While sending the packet to provider bridge, we
also replace router port MAC as source MAC with a
chassis unique MAC.
This chassis unique MAC is configured as global ovs
config on each chassis (eg. via "ovs-vsctl set open .
external-ids:
ovn-chassis-mac-mappings="phys:aa:bb:cc:dd:ee:$i$i"").
For more details, see ovn-controller(8).
If the above is not configured, then source MAC would
be the router port MAC. This could create problem if
we have more than one chassis. This is because, since
the router port is distributed, the same (MAC,VLAN)
tuple will seen by physical network from other chassis
as well, which could cause these issues:
• Continuous MAC moves in top-of-rack switch
(ToR).
• ToR dropping the traffic, which is causing
continuous MAC moves.
• ToR blocking the ports from which MAC moves are
happening.
4. The destination chassis receives the packet via the
localnet port and sends it to the integration bridge.
The packet enters the ingress pipeline and then egress
pipeline of the destination localnet logical switch
and finally gets delivered to the destination VM port.
External traffic
The following happens when a VM sends an external traffic (which
requires NATting) and the chassis hosting the VM doesn't have a
distributed gateway port.
1. The packet first enters the ingress pipeline, and then
egress pipeline of the source localnet logical switch
datapath. It then enters the ingress pipeline of the
logical router datapath via the logical router port in
the source chassis.
2. Routing decision is taken. Since the gateway router or
the distributed gateway port doesn't reside in the
source chassis, the traffic is redirected to the
gateway chassis via the tunnel port.
3. The gateway chassis receives the packet via the tunnel
port and the packet enters the egress pipeline of the
logical router datapath. NAT rules are applied here.
The packet then enters the ingress pipeline and then
egress pipeline of the localnet logical switch
datapath which provides external connectivity and
finally goes out via the localnet port of the logical
switch which provides external connectivity.
Although this works, the VM traffic is tunnelled when sent from
the compute chassis to the gateway chassis. In order for it to
work properly, the MTU of the localnet logical switches must be
lowered to account for the tunnel encapsulation.
Centralized routing for localnet VLAN tagged logical switches
connected to a Logical Router "
To overcome the tunnel encapsulation problem described in the
previous section, OVN supports the option of enabling centralized
routing for localnet VLAN tagged logical switches. CMS can
configure the option options:reside-on-redirect-chassis to true
for each Logical_Router_Port which connects to the localnet VLAN
tagged logical switches. This causes the gateway chassis (hosting
the distributed gateway port) to handle all the routing for these
networks, making it centralized. It will reply to the ARP
requests for the logical router port IPs.
If the logical router doesn't have a distributed gateway port
connecting to the localnet logical switch which provides external
connectivity, then this option is ignored by OVN.
The following happens when a VM sends an east-west traffic which
needs to be routed:
1. The packet first enters the ingress pipeline, and then
egress pipeline of the source localnet logical switch
datapath and is sent out via the localnet port of the
source localnet logical switch (instead of sending it
to router pipeline).
2. The gateway chassis receives the packet via the
localnet port of the source localnet logical switch
and sends it to the integration bridge. The packet
then enters the ingress pipeline, and then egress
pipeline of the source localnet logical switch
datapath and enters the ingress pipeline of the
logical router datapath.
3. Routing decision is taken.
4. From the router datapath, packet enters the ingress
pipeline and then egress pipeline of the destination
localnet logical switch datapath. It then goes out of
the integration bridge to the provider bridge (
belonging to the destination logical switch) via the
localnet port.
5. The destination chassis receives the packet via the
localnet port and sends it to the integration bridge.
The packet enters the ingress pipeline and then egress
pipeline of the destination localnet logical switch
and finally delivered to the destination VM port.
The following happens when a VM sends an external traffic which
requires NATting:
1. The packet first enters the ingress pipeline, and then
egress pipeline of the source localnet logical switch
datapath and is sent out via the localnet port of the
source localnet logical switch (instead of sending it
to router pipeline).
2. The gateway chassis receives the packet via the
localnet port of the source localnet logical switch
and sends it to the integration bridge. The packet
then enters the ingress pipeline, and then egress
pipeline of the source localnet logical switch
datapath and enters the ingress pipeline of the
logical router datapath.
3. Routing decision is taken and NAT rules are applied.
4. From the router datapath, packet enters the ingress
pipeline and then egress pipeline of the localnet
logical switch datapath which provides external
connectivity. It then goes out of the integration
bridge to the provider bridge (belonging to the
logical switch which provides external connectivity)
via the localnet port.
The following happens for the reverse external traffic.
1. The gateway chassis receives the packet from the
localnet port of the logical switch which provides
external connectivity. The packet then enters the
ingress pipeline and then egress pipeline of the
localnet logical switch (which provides external
connectivity). The packet then enters the ingress
pipeline of the logical router datapath.
2. The ingress pipeline of the logical router datapath
applies the unNATting rules. The packet then enters
the ingress pipeline and then egress pipeline of the
source localnet logical switch. Since the source VM
doesn't reside in the gateway chassis, the packet is
sent out via the localnet port of the source logical
switch.
3. The source chassis receives the packet via the
localnet port and sends it to the integration bridge.
The packet enters the ingress pipeline and then egress
pipeline of the source localnet logical switch and
finally gets delivered to the source VM port.
Life Cycle of a VTEP gateway
A gateway is a chassis that forwards traffic between the OVN-
managed part of a logical network and a physical VLAN, extending
a tunnel-based logical network into a physical network.
The steps below refer often to details of the OVN and VTEP
database schemas. Please see ovn-sb(5), ovn-nb(5) and vtep(5),
respectively, for the full story on these databases.
1. A VTEP gateway's life cycle begins with the
administrator registering the VTEP gateway as a
Physical_Switch table entry in the VTEP database. The
ovn-controller-vtep connected to this VTEP database,
will recognize the new VTEP gateway and create a new
Chassis table entry for it in the OVN_Southbound
database.
2. The administrator can then create a new Logical_Switch
table entry, and bind a particular vlan on a VTEP
gateway's port to any VTEP logical switch. Once a VTEP
logical switch is bound to a VTEP gateway, the
ovn-controller-vtep will detect it and add its name to
the vtep_logical_switches column of the Chassis table
in the OVN_Southbound database. Note, the tunnel_key
column of VTEP logical switch is not filled at
creation. The ovn-controller-vtep will set the column
when the correponding vtep logical switch is bound to
an OVN logical network.
3. Now, the administrator can use the CMS to add a VTEP
logical switch to the OVN logical network. To do that,
the CMS must first create a new Logical_Switch_Port
table entry in the OVN_Northbound database. Then, the
type column of this entry must be set to "vtep". Next,
the vtep-logical-switch and vtep-physical-switch keys
in the options column must also be specified, since
multiple VTEP gateways can attach to the same VTEP
logical switch.
4. The newly created logical port in the OVN_Northbound
database and its configuration will be passed down to
the OVN_Southbound database as a new Port_Binding
table entry. The ovn-controller-vtep will recognize
the change and bind the logical port to the
corresponding VTEP gateway chassis. Configuration of
binding the same VTEP logical switch to a different
OVN logical networks is not allowed and a warning will
be generated in the log.
5. Beside binding to the VTEP gateway chassis, the
ovn-controller-vtep will update the tunnel_key column
of the VTEP logical switch to the corresponding
Datapath_Binding table entry's tunnel_key for the
bound OVN logical network.
6. Next, the ovn-controller-vtep will keep reacting to
the configuration change in the Port_Binding in the
OVN_Northbound database, and updating the
Ucast_Macs_Remote table in the VTEP database. This
allows the VTEP gateway to understand where to forward
the unicast traffic coming from the extended external
network.
7. Eventually, the VTEP gateway's life cycle ends when
the administrator unregisters the VTEP gateway from
the VTEP database. The ovn-controller-vtep will
recognize the event and remove all related
configurations (Chassis table entry and port bindings)
in the OVN_Southbound database.
8. When the ovn-controller-vtep is terminated, all
related configurations in the OVN_Southbound database
and the VTEP database will be cleaned, including
Chassis table entries for all registered VTEP gateways
and their port bindings, and all Ucast_Macs_Remote
table entries and the Logical_Switch tunnel keys.
Native OVN services for external logical ports
To support OVN native services (like DHCP/IPv6 RA/DNS lookup) to
the cloud resources which are external, OVN supports external
logical ports.
Below are some of the use cases where external ports can be used.
• VMs connected to SR-IOV nics - Traffic from these
VMs by passes the kernel stack and local
ovn-controller do not bind these ports and cannot
serve the native services.
• When CMS supports provisioning baremetal servers.
OVN will provide the native services if CMS has done the below
configuration in the OVN Northbound Database.
• A row is created in Logical_Switch_Port,
configuring the addresses column and setting the
type to external.
• ha_chassis_group column is configured.
• The HA chassis which belongs to the HA chassis
group has the ovn-bridge-mappings configured and
has proper L2 connectivity so that it can receive
the DHCP and other related request packets from
these external resources.
• The Logical_Switch of this port has a localnet
port.
• Native OVN services are enabled by configuring the
DHCP and other options like the way it is done for
the normal logical ports.
It is recommended to use the same HA chassis group for all the
external ports of a logical switch. Otherwise, the physical
switch might see MAC flap issue when different chassis provide
the native services. For example when supporting native DHCPv4
service, DHCPv4 server mac (configured in options:server_mac
column in table DHCP_Options) originating from different ports
can cause MAC flap issue. The MAC of the logical router IP(s) can
also flap if the same HA chassis group is not set for all the
external ports of a logical switch.
