утилита управления базами данных Open Virtual Network на севере (Open Virtual Network northbound db management utility)
LOGICAL SWITCH QOS RULE COMMANDS
[--may-exist] qos-add switch direction priority match [dscp=dscp]
[rate=rate [burst=burst]]
Adds QoS marking and metering rules to switch. direction
must be either from-lport or to-lport. priority must be
between 0 and 32767, inclusive.
If dscp=dscp is specified, then matching packets will have
DSCP marking applied. dscp must be between 0 and 63,
inclusive. If rate=rate is specified then matching packets
will have metering applied at rate kbps. If metering is
configured, then burst=burst specifies the burst rate
limit in kilobits. dscp and/or rate are required
arguments.
If --may-exist is specified, adding a duplicated QoS rule
succeeds but the QoS rule is not really created. Without
--may-exist, adding a duplicated QoS rule results in
error.
qos-del switch [direction [priority match]]
Deletes QoS rules from switch. If only switch is supplied,
all the QoS rules from the logical switch are deleted. If
direction is also specified, then all the flows in that
direction will be deleted from the logical switch. If all
the fields are supplied, then a single flow that matches
the given fields will be deleted.
qos-list switch
Lists the QoS rules on switch.
