воспроизвести журналы сеанса sudo (replay sudo session logs)
Описание (Description)
sudoreplay plays back or lists the output logs created by sudo.
When replaying, sudoreplay can play the session back in real-time,
or the playback speed may be adjusted (faster or slower) based on
the command line options.
The ID should either be a six character sequence of digits and
upper case letters, e.g., 0100A5 or a path name. The ID may
include an optional @offset suffix which may be used to start
replaying at a specific time offset. The @offset is specified as a
number in seconds since the start of the session with an optional
decimal fraction.
Path names may be relative to the I/O log directory
/var/log/sudo-io (unless overridden by the -d option) or fully
qualified, beginning with a '/' character. When a command is run
via sudo with log_output enabled in the sudoers file, a TSID=ID
string is logged via syslog or to the sudo log file. The ID may
also be determined using sudoreplay's list mode.
In list mode, sudoreplay can be used to find the ID of a session
based on a number of criteria such as the user, tty or command run.
In replay mode, if the standard input and output are connected to a
terminal and the -n option is not specified, sudoreplay will
operate interactively. In interactive mode, sudoreplay will
attempt to adjust the terminal size to match that of the session
and write directly to the terminal (not all terminals support
this). Additionally, it will poll the keyboard and act on the
following keys:
'\n' or '\r' Skip to the next replay event; useful for long
pauses.
' ' (space) Pause output; press any key to resume.
'<' Reduce the playback speed by one half.
'>' Double the playback speed.
The session can be interrupted via control-C. When the session has
finished, the terminal is restored to its original size if it was
changed during playback.
The options are as follows:
-d dir, --directory=dir
Store session logs in dir instead of the default,
/var/log/sudo-io.
-f filter, --filter=filter
Select which I/O type(s) to display. By default,
sudoreplay will display the command's standard output,
standard error and tty output. The filter argument is
a comma-separated list, consisting of one or more of
following: stdin, stdout, stderr, ttyin, and ttyout.
-F, --follow
Enable 'follow mode'. When replaying a session,
sudoreplay will ignore end-of-file and keep replaying
until the log is complete. This can be used to replay
a session that is still in progress, similar to 'tail
-f'. An I/O log file is considered to be complete when
the write bits have been cleared on the session's
timing file. Note that versions of sudo prior to 1.9.1
do not clear the write bits upon completion.
-h, --help Display a short help message to the standard output and
exit.
-l, --list [search expression]
Enable 'list mode'. In this mode, sudoreplay will list
available sessions in a format similar to the sudo log
file format, sorted by file name (or sequence number).
If a search expression is specified, it will be used to
restrict the IDs that are displayed. An expression is
composed of the following predicates:
command pattern
Evaluates to true if the command run matches
the POSIX extended regular expression pattern.
cwd directory
Evaluates to true if the command was run with
the specified current working directory.
fromdate date
Evaluates to true if the command was run on or
after date. See Date and time format for a
description of supported date and time formats.
group runas_group
Evaluates to true if the command was run with
the specified runas_group. Note that unless a
runas_group was explicitly specified when sudo
was run this field will be empty in the log.
host hostname
Evaluates to true if the command was run on the
specified hostname.
runas runas_user
Evaluates to true if the command was run as the
specified runas_user. Note that sudo runs
commands as user root by default.
todate date
Evaluates to true if the command was run on or
prior to date. See Date and time format for a
description of supported date and time formats.
tty tty name
Evaluates to true if the command was run on the
specified terminal device. The tty name should
be specified without the /dev/ prefix, e.g.,
tty01 instead of /dev/tty01.
user user name
Evaluates to true if the ID matches a command
run by user name.
Predicates may be abbreviated to the shortest unique
string.
Predicates may be combined using and, or and !
operators as well as '(' and ')' grouping (note that
parentheses must generally be escaped from the shell).
The and operator is optional, adjacent predicates have
an implied and unless separated by an or.
-m, --max-wait max_wait
Specify an upper bound on how long to wait between key
presses or output data. By default, sudoreplay will
accurately reproduce the delays between key presses or
program output. However, this can be tedious when the
session includes long pauses. When the -m option is
specified, sudoreplay will limit these pauses to at
most max_wait seconds. The value may be specified as a
floating point number, e.g., 2.5. A max_wait of zero
or less will eliminate the pauses entirely.
-n, --non-interactive
Do not prompt for user input or attempt to re-size the
terminal. The session is written to the standard
output, not directly to the user's terminal.
-R, --no-resize
Do not attempt to re-size the terminal to match the
terminal size of the session.
-S, --suspend-wait
Wait while the command was suspended. By default,
sudoreplay will ignore the time interval between when
the command was suspended and when it was resumed. If
the -S option is specified, sudoreplay will wait
instead.
-s, --speed speed_factor
This option causes sudoreplay to adjust the number of
seconds it will wait between key presses or program
output. This can be used to slow down or speed up the
display. For example, a speed_factor of 2 would make
the output twice as fast whereas a speed_factor of .5
would make the output twice as slow.
-V, --version
Print the sudoreplay versions version number and exit.
Date and time format
The time and date may be specified multiple ways, common formats
include:
HH:MM:SS am MM/DD/CCYY timezone
24 hour time may be used in place of am/pm.
HH:MM:SS am Month, Day Year timezone
24 hour time may be used in place of am/pm, and month and
day names may be abbreviated. Note that month and day of
the week names must be specified in English.
CCYY-MM-DD HH:MM:SS
ISO time format
DD Month CCYY HH:MM:SS
The month name may be abbreviated.
Either time or date may be omitted, the am/pm and timezone are
optional. If no date is specified, the current day is assumed; if
no time is specified, the first second of the specified date is
used. The less significant parts of both time and date may also be
omitted, in which case zero is assumed.
The following are all valid time and date specifications:
now The current time and date.
tomorrow
Exactly one day from now.
yesterday
24 hours ago.
2 hours ago
2 hours ago.
next Friday
The first second of the Friday in the next (upcoming) week.
Not to be confused with 'this Friday' which would match the
Friday of the current week.
last week
The current time but 7 days ago. This is equivalent to 'a
week ago'.
a fortnight ago
The current time but 14 days ago.
10:01 am 9/17/2009
10:01 am, September 17, 2009.
10:01 am
10:01 am on the current day.
10 10:00 am on the current day.
9/17/2009
00:00 am, September 17, 2009.
10:01 am Sep 17, 2009
10:01 am, September 17, 2009.
Note that relative time specifications do not always work as
expected. For example, the 'next' qualifier is intended to be used
in conjunction with a day such as 'next Monday'. When used with
units of weeks, months, years, etc the result will be one more than
expected. For example, 'next week' will result in a time exactly
two weeks from now, which is probably not what was intended. This
will be addressed in a future version of sudoreplay.
Debugging sudoreplay
sudoreplay versions 1.8.4 and higher support a flexible debugging
framework that is configured via Debug lines in the sudo.conf(5)
file.
For more information on configuring sudo.conf(5), please refer to
its manual.
