клиент удаленного входа OpenSSH (OpenSSH remote login client)
Описание (Description)
ssh (SSH client) is a program for logging into a remote machine and
for executing commands on a remote machine. It is intended to
provide secure encrypted communications between two untrusted hosts
over an insecure network. X11 connections, arbitrary TCP ports and
UNIX-domain sockets can also be forwarded over the secure channel.
ssh connects and logs into the specified destination, which may be
specified as either [user@]hostname or a URI of the form
ssh://[user@]hostname[:port]. The user must prove their identity
to the remote machine using one of several methods (see below).
If a command is specified, it is executed on the remote host
instead of a login shell.
The options are as follows:
-4 Forces ssh to use IPv4 addresses only.
-6 Forces ssh to use IPv6 addresses only.
-A Enables forwarding of connections from an authentication
agent such as ssh-agent(1). This can also be specified on
a per-host basis in a configuration file.
Agent forwarding should be enabled with caution. Users
with the ability to bypass file permissions on the remote
host (for the agent's UNIX-domain socket) can access the
local agent through the forwarded connection. An attacker
cannot obtain key material from the agent, however they can
perform operations on the keys that enable them to
authenticate using the identities loaded into the agent. A
safer alternative may be to use a jump host (see -J).
-a Disables forwarding of the authentication agent connection.
-B bind_interface
Bind to the address of bind_interface before attempting to
connect to the destination host. This is only useful on
systems with more than one address.
-b bind_address
Use bind_address on the local machine as the source address
of the connection. Only useful on systems with more than
one address.
-C Requests compression of all data (including stdin, stdout,
stderr, and data for forwarded X11, TCP and UNIX-domain
connections). The compression algorithm is the same used
by gzip(1). Compression is desirable on modem lines and
other slow connections, but will only slow down things on
fast networks. The default value can be set on a host-by-
host basis in the configuration files; see the Compression
option.
-c cipher_spec
Selects the cipher specification for encrypting the
session. cipher_spec is a comma-separated list of ciphers
listed in order of preference. See the Ciphers keyword in
ssh_config(5) for more information.
-D [bind_address:]port
Specifies a local 'dynamic' application-level port
forwarding. This works by allocating a socket to listen to
port on the local side, optionally bound to the specified
bind_address. Whenever a connection is made to this port,
the connection is forwarded over the secure channel, and
the application protocol is then used to determine where to
connect to from the remote machine. Currently the SOCKS4
and SOCKS5 protocols are supported, and ssh will act as a
SOCKS server. Only root can forward privileged ports.
Dynamic port forwardings can also be specified in the
configuration file.
IPv6 addresses can be specified by enclosing the address in
square brackets. Only the superuser can forward privileged
ports. By default, the local port is bound in accordance
with the GatewayPorts setting. However, an explicit
bind_address may be used to bind the connection to a
specific address. The bind_address of 'localhost'
indicates that the listening port be bound for local use
only, while an empty address or '*' indicates that the port
should be available from all interfaces.
-E log_file
Append debug logs to log_file instead of standard error.
-e escape_char
Sets the escape character for sessions with a pty (default:
'~'). The escape character is only recognized at the
beginning of a line. The escape character followed by a
dot ('.') closes the connection; followed by control-Z
suspends the connection; and followed by itself sends the
escape character once. Setting the character to 'none'
disables any escapes and makes the session fully
transparent.
-F configfile
Specifies an alternative per-user configuration file. If a
configuration file is given on the command line, the
system-wide configuration file (/etc/ssh/ssh_config) will
be ignored. The default for the per-user configuration
file is ~/.ssh/config. If set to 'none', no configuration
files will be read.
-f Requests ssh to go to background just before command
execution. This is useful if ssh is going to ask for
passwords or passphrases, but the user wants it in the
background. This implies -n. The recommended way to start
X11 programs at a remote site is with something like ssh -f
host xterm.
If the ExitOnForwardFailure configuration option is set to
'yes', then a client started with -f will wait for all
remote port forwards to be successfully established before
placing itself in the background. Refer to the description
of ForkAfterAuthentication in ssh_config(5) for details.
-G Causes ssh to print its configuration after evaluating Host
and Match blocks and exit.
-g Allows remote hosts to connect to local forwarded ports.
If used on a multiplexed connection, then this option must
be specified on the master process.
-I pkcs11
Specify the PKCS#11 shared library ssh should use to
communicate with a PKCS#11 token providing keys for user
authentication.
-i identity_file
Selects a file from which the identity (private key) for
public key authentication is read. The default is
~/.ssh/id_dsa, ~/.ssh/id_ecdsa, ~/.ssh/id_ecdsa_sk,
~/.ssh/id_ed25519, ~/.ssh/id_ed25519_sk and ~/.ssh/id_rsa.
Identity files may also be specified on a per-host basis in
the configuration file. It is possible to have multiple -i
options (and multiple identities specified in configuration
files). If no certificates have been explicitly specified
by the CertificateFile directive, ssh will also try to load
certificate information from the filename obtained by
appending -cert.pub to identity filenames.
-J destination
Connect to the target host by first making a ssh connection
to the jump host described by destination and then
establishing a TCP forwarding to the ultimate destination
from there. Multiple jump hops may be specified separated
by comma characters. This is a shortcut to specify a
ProxyJump configuration directive. Note that configuration
directives supplied on the command-line generally apply to
the destination host and not any specified jump hosts. Use
~/.ssh/config to specify configuration for jump hosts.
-K Enables GSSAPI-based authentication and forwarding
(delegation) of GSSAPI credentials to the server.
-k Disables forwarding (delegation) of GSSAPI credentials to
the server.
-L [bind_address:]port:host:hostport
-L [bind_address:]port:remote_socket
-L local_socket:host:hostport
-L local_socket:remote_socket
Specifies that connections to the given TCP port or Unix
socket on the local (client) host are to be forwarded to
the given host and port, or Unix socket, on the remote
side. This works by allocating a socket to listen to
either a TCP port on the local side, optionally bound to
the specified bind_address, or to a Unix socket. Whenever
a connection is made to the local port or socket, the
connection is forwarded over the secure channel, and a
connection is made to either host port hostport, or the
Unix socket remote_socket, from the remote machine.
Port forwardings can also be specified in the configuration
file. Only the superuser can forward privileged ports.
IPv6 addresses can be specified by enclosing the address in
square brackets.
By default, the local port is bound in accordance with the
GatewayPorts setting. However, an explicit bind_address
may be used to bind the connection to a specific address.
The bind_address of 'localhost' indicates that the
listening port be bound for local use only, while an empty
address or '*' indicates that the port should be available
from all interfaces.
-l login_name
Specifies the user to log in as on the remote machine.
This also may be specified on a per-host basis in the
configuration file.
-M Places the ssh client into 'master' mode for connection
sharing. Multiple -M options places ssh into 'master' mode
but with confirmation required using ssh-askpass(1) before
each operation that changes the multiplexing state (e.g.
opening a new session). Refer to the description of
ControlMaster in ssh_config(5) for details.
-m mac_spec
A comma-separated list of MAC (message authentication code)
algorithms, specified in order of preference. See the MACs
keyword for more information.
-N Do not execute a remote command. This is useful for just
forwarding ports. Refer to the description of SessionType
in ssh_config(5) for details.
-n Redirects stdin from /dev/null (actually, prevents reading
from stdin). This must be used when ssh is run in the
background. A common trick is to use this to run X11
programs on a remote machine. For example, ssh -n
shadows.cs.hut.fi emacs & will start an emacs on
shadows.cs.hut.fi, and the X11 connection will be
automatically forwarded over an encrypted channel. The ssh
program will be put in the background. (This does not work
if ssh needs to ask for a password or passphrase; see also
the -f option.) Refer to the description of StdinNull in
ssh_config(5) for details.
-O ctl_cmd
Control an active connection multiplexing master process.
When the -O option is specified, the ctl_cmd argument is
interpreted and passed to the master process. Valid
commands are: 'check' (check that the master process is
running), 'forward' (request forwardings without command
execution), 'cancel' (cancel forwardings), 'exit' (request
the master to exit), and 'stop' (request the master to stop
accepting further multiplexing requests).
-o option
Can be used to give options in the format used in the
configuration file. This is useful for specifying options
for which there is no separate command-line flag. For full
details of the options listed below, and their possible
values, see ssh_config(5).
AddKeysToAgent
AddressFamily
BatchMode
BindAddress
CanonicalDomains
CanonicalizeFallbackLocal
CanonicalizeHostname
CanonicalizeMaxDots
CanonicalizePermittedCNAMEs
CASignatureAlgorithms
CertificateFile
CheckHostIP
Ciphers
ClearAllForwardings
Compression
ConnectionAttempts
ConnectTimeout
ControlMaster
ControlPath
ControlPersist
DynamicForward
EscapeChar
ExitOnForwardFailure
FingerprintHash
ForkAfterAuthentication
ForwardAgent
ForwardX11
ForwardX11Timeout
ForwardX11Trusted
GatewayPorts
GlobalKnownHostsFile
GSSAPIAuthentication
GSSAPIDelegateCredentials
HashKnownHosts
Host
HostbasedAcceptedAlgorithms
HostbasedAuthentication
HostKeyAlgorithms
HostKeyAlias
Hostname
IdentitiesOnly
IdentityAgent
IdentityFile
IPQoS
KbdInteractiveAuthentication
KbdInteractiveDevices
KexAlgorithms
KnownHostsCommand
LocalCommand
LocalForward
LogLevel
MACs
Match
NoHostAuthenticationForLocalhost
NumberOfPasswordPrompts
PasswordAuthentication
PermitLocalCommand
PermitRemoteOpen
PKCS11Provider
Port
PreferredAuthentications
ProxyCommand
ProxyJump
ProxyUseFdpass
PubkeyAcceptedAlgorithms
PubkeyAuthentication
RekeyLimit
RemoteCommand
RemoteForward
RequestTTY
SendEnv
ServerAliveInterval
ServerAliveCountMax
SessionType
SetEnv
StdinNull
StreamLocalBindMask
StreamLocalBindUnlink
StrictHostKeyChecking
TCPKeepAlive
Tunnel
TunnelDevice
UpdateHostKeys
User
UserKnownHostsFile
VerifyHostKeyDNS
VisualHostKey
XAuthLocation
-p port
Port to connect to on the remote host. This can be
specified on a per-host basis in the configuration file.
-Q query_option
Queries for the algorithms supported by one of the
following features: cipher (supported symmetric ciphers),
cipher-auth (supported symmetric ciphers that support
authenticated encryption), help (supported query terms for
use with the -Q flag), mac (supported message integrity
codes), kex (key exchange algorithms), key (key types),
key-cert (certificate key types), key-plain (non-
certificate key types), key-sig (all key types and
signature algorithms), protocol-version (supported SSH
protocol versions), and sig (supported signature
algorithms). Alternatively, any keyword from ssh_config(5)
or sshd_config(5) that takes an algorithm list may be used
as an alias for the corresponding query_option.
-q Quiet mode. Causes most warning and diagnostic messages to
be suppressed.
-R [bind_address:]port:host:hostport
-R [bind_address:]port:local_socket
-R remote_socket:host:hostport
-R remote_socket:local_socket
-R [bind_address:]port
Specifies that connections to the given TCP port or Unix
socket on the remote (server) host are to be forwarded to
the local side.
This works by allocating a socket to listen to either a TCP
port or to a Unix socket on the remote side. Whenever a
connection is made to this port or Unix socket, the
connection is forwarded over the secure channel, and a
connection is made from the local machine to either an
explicit destination specified by host port hostport, or
local_socket, or, if no explicit destination was specified,
ssh will act as a SOCKS 4/5 proxy and forward connections
to the destinations requested by the remote SOCKS client.
Port forwardings can also be specified in the configuration
file. Privileged ports can be forwarded only when logging
in as root on the remote machine. IPv6 addresses can be
specified by enclosing the address in square brackets.
By default, TCP listening sockets on the server will be
bound to the loopback interface only. This may be
overridden by specifying a bind_address. An empty
bind_address, or the address '*', indicates that the remote
socket should listen on all interfaces. Specifying a
remote bind_address will only succeed if the server's
GatewayPorts option is enabled (see sshd_config(5)).
If the port argument is '0', the listen port will be
dynamically allocated on the server and reported to the
client at run time. When used together with -O forward the
allocated port will be printed to the standard output.
-S ctl_path
Specifies the location of a control socket for connection
sharing, or the string 'none' to disable connection
sharing. Refer to the description of ControlPath and
ControlMaster in ssh_config(5) for details.
-s May be used to request invocation of a subsystem on the
remote system. Subsystems facilitate the use of SSH as a
secure transport for other applications (e.g. sftp(1)).
The subsystem is specified as the remote command. Refer to
the description of SessionType in ssh_config(5) for
details.
-T Disable pseudo-terminal allocation.
-t Force pseudo-terminal allocation. This can be used to
execute arbitrary screen-based programs on a remote
machine, which can be very useful, e.g. when implementing
menu services. Multiple -t options force tty allocation,
even if ssh has no local tty.
-V Display the version number and exit.
-v Verbose mode. Causes ssh to print debugging messages about
its progress. This is helpful in debugging connection,
authentication, and configuration problems. Multiple -v
options increase the verbosity. The maximum is 3.
-W host:port
Requests that standard input and output on the client be
forwarded to host on port over the secure channel. Implies
-N, -T, ExitOnForwardFailure and ClearAllForwardings,
though these can be overridden in the configuration file or
using -o command line options.
-w local_tun[:remote_tun]
Requests tunnel device forwarding with the specified tun(4)
devices between the client (local_tun) and the server
(remote_tun).
The devices may be specified by numerical ID or the keyword
'any', which uses the next available tunnel device. If
remote_tun is not specified, it defaults to 'any'. See
also the Tunnel and TunnelDevice directives in
ssh_config(5).
If the Tunnel directive is unset, it will be set to the
default tunnel mode, which is 'point-to-point'. If a
different Tunnel forwarding mode it desired, then it should
be specified before -w.
-X Enables X11 forwarding. This can also be specified on a
per-host basis in a configuration file.
X11 forwarding should be enabled with caution. Users with
the ability to bypass file permissions on the remote host
(for the user's X authorization database) can access the
local X11 display through the forwarded connection. An
attacker may then be able to perform activities such as
keystroke monitoring.
For this reason, X11 forwarding is subjected to X11
SECURITY extension restrictions by default. Please refer
to the ssh -Y option and the ForwardX11Trusted directive in
ssh_config(5) for more information.
-x Disables X11 forwarding.
-Y Enables trusted X11 forwarding. Trusted X11 forwardings
are not subjected to the X11 SECURITY extension controls.
-y Send log information using the syslog(3) system module. By
default this information is sent to stderr.
ssh may additionally obtain configuration data from a per-user
configuration file and a system-wide configuration file. The file
format and configuration options are described in ssh_config(5).
