Путеводитель по Руководству Linux

  User  |  Syst  |  Libr  |  Device  |  Files  |  Other  |  Admin  |  Head  |



   __ppc_set_ppr_med    ( 3 )

установите регистр приоритета программы (set the Program Priority Register)

Имя (Name)

__ppc_set_ppr_med, __ppc_set_ppr_very_low, __ppc_set_ppr_low,
       __ppc_set_ppr_med_low, __ppc_set_ppr_med_high - Set the Program
       Priority Register

Синопсис (Synopsis)

#include <sys/platform/ppc.h>

void __ppc_set_ppr_med(void); void __ppc_set_ppr_very_low(void); void __ppc_set_ppr_low(void); void __ppc_set_ppr_med_low(void); void __ppc_set_ppr_med_high(void);


Описание (Description)

These functions provide access to the Program Priority Register
       (PPR) on the Power architecture.

The PPR is a 64-bit register that controls the program's priority. By adjusting the PPR value the programmer may improve system throughput by causing system resources to be used more efficiently, especially in contention situations. The available unprivileged states are covered by the following functions:

* __ppc_set_ppr_med() sets the Program Priority Register value to medium (default).

* __ppc_set_ppr_very_low() sets the Program Priority Register value to very low.

* __ppc_set_ppr_low() sets the Program Priority Register value to low.

* __ppc_set_ppr_med_low() sets the Program Priority Register value to medium low.

The privileged state medium high may also be set during certain time intervals by problem-state (unprivileged) programs, with the following function:

* __ppc_set_ppr_med_high() sets the Program Priority to medium high.

If the program priority is medium high when the time interval expires or if an attempt is made to set the priority to medium high when it is not allowed, the priority is set to medium.


Версии (Versions)

The functions __ppc_set_ppr_med(), __ppc_set_ppr_low(), and
       __ppc_set_ppr_med_low() are provided by glibc since version 2.18.
       The functions __ppc_set_ppr_very_low() and
       __ppc_set_ppr_med_high() first appeared in glibc in version 2.23.

Атрибуты (Attributes)

For an explanation of the terms used in this section, see
       attributes(7).

┌──────────────────────────────────────┬───────────────┬─────────┐ │Interface Attribute Value │ ├──────────────────────────────────────┼───────────────┼─────────┤ │__ppc_set_ppr_med(), │ Thread safety │ MT-Safe │ │__ppc_set_ppr_very_low(), │ │ │ │__ppc_set_ppr_low(), │ │ │ │__ppc_set_ppr_med_low(), │ │ │ │__ppc_set_ppr_med_high() │ │ │ └──────────────────────────────────────┴───────────────┴─────────┘


Стандарты (Conforming to)

These functions are nonstandard GNU extensions.

Примечание (Note)

The functions __ppc_set_ppr_very_low() and
       __ppc_set_ppr_med_high() will be defined by <sys/platform/ppc.h>
       if _ARCH_PWR8 is defined.  Availability of these functions can be
       tested using #ifdef _ARCH_PWR8.

Смотри также (See also)

__ppc_yield(3)

Power ISA, Book II - Section 3.1 (Program Priority Registers)