инструмент исследования сети и сканер безопасности / портов (Network exploration tool and security / port scanner)
Вывод (Output)
Any security tool is only as useful as the output it generates.
Complex tests and algorithms are of little value if they aren't
presented in an organized and comprehensible fashion. Given the
number of ways Nmap is used by people and other software, no
single format can please everyone. So Nmap offers several
formats, including the interactive mode for humans to read
directly and XML for easy parsing by software.
In addition to offering different output formats, Nmap provides
options for controlling the verbosity of output as well as
debugging messages. Output types may be sent to standard output
or to named files, which Nmap can append to or clobber. Output
files may also be used to resume aborted scans.
Nmap makes output available in five different formats. The
default is called interactive output, and it is sent to standard
output (stdout). There is also normal output, which is similar
to interactive except that it displays less runtime information
and warnings since it is expected to be analyzed after the scan
completes rather than interactively.
XML output is one of the most important output types, as it can
be converted to HTML, easily parsed by programs such as Nmap
graphical user interfaces, or imported into databases.
The two remaining output types are the simple grepable output
which includes most information for a target host on a single
line, and sCRiPt KiDDi3 0utPUt for users who consider themselves
|<-r4d.
While interactive output is the default and has no associated
command-line options, the other four format options use the same
syntax. They take one argument, which is the filename that
results should be stored in. Multiple formats may be specified,
but each format may only be specified once. For example, you may
wish to save normal output for your own review while saving XML
of the same scan for programmatic analysis. You might do this
with the options -oX myscan.xml -oN myscan.nmap. While this
chapter uses the simple names like myscan.xml for brevity, more
descriptive names are generally recommended. The names chosen are
a matter of personal preference, though I use long ones that
incorporate the scan date and a word or two describing the scan,
placed in a directory named after the company I'm scanning.
While these options save results to files, Nmap still prints
interactive output to stdout as usual. For example, the command
nmap -oX myscan.xml target prints XML to myscan.xml and fills
standard output with the same interactive results it would have
printed if -oX wasn't specified at all. You can change this by
passing a hyphen character as the argument to one of the format
types. This causes Nmap to deactivate interactive output, and
instead print results in the format you specified to the standard
output stream. So the command nmap -oX - target will send only
XML output to stdout. Serious errors may still be printed to the
normal error stream, stderr.
Unlike some Nmap arguments, the space between the logfile option
flag (such as -oX) and the filename or hyphen is mandatory. If
you omit the flags and give arguments such as -oG- or
-oXscan.xml, a backwards compatibility feature of Nmap will cause
the creation of normal format output files named G- and Xscan.xml
respectively.
All of these arguments support strftime-like conversions in the
filename. %H, %M, %S, %m, %d, %y, and %Y are all exactly the
same as in strftime. %T is the same as %H%M%S, %R is the same as
%H%M, and %D is the same as %m%d%y. A % followed by any other
character just yields that character (%% gives you a percent
symbol). So -oX 'scan-%T-%D.xml' will use an XML file with a name
in the form of scan-144840-121307.xml.
Nmap also offers options to control scan verbosity and to append
to output files rather than clobbering them. All of these options
are described below.
Nmap Output Formats
-oN filespec (normal output)
Requests that normal output be directed to the given
filename. As discussed above, this differs slightly from
interactive output.
-oX filespec (XML output)
Requests that XML output be directed to the given filename.
Nmap includes a document type definition (DTD) which allows
XML parsers to validate Nmap XML output. While it is
primarily intended for programmatic use, it can also help
humans interpret Nmap XML output. The DTD defines the legal
elements of the format, and often enumerates the attributes
and values they can take on. The latest version is always
available from https://svn.nmap.org/nmap/docs/nmap.dtd
XML offers a stable format that is easily parsed by software.
Free XML parsers are available for all major computer
languages, including C/C++, Perl, Python, and Java. People
have even written bindings for most of these languages to
handle Nmap output and execution specifically. Examples are
Nmap::ScannerNmap::Parser
The XML output references an XSL stylesheet which can be used
to format the results as HTML. The easiest way to use this is
simply to load the XML output in a web browser such as
Firefox or IE. By default, this will only work on the machine
you ran Nmap on (or a similarly configured one) due to the
hard-coded nmap.xsl filesystem path. Use the --webxml or
--stylesheet options to create portable XML files that render
as HTML on any web-connected machine.
-oS filespec (ScRipT KIdd|3 oUTpuT)
Script kiddie output is like interactive output, except that
it is post-processed to better suit the l33t HaXXorZ who
previously looked down on Nmap due to its consistent
capitalization and spelling. Humor impaired people should
note that this option is making fun of the script kiddies
before flaming me for supposedly 'helping them'.
-oG filespec (grepable output)
This output format is covered last because it is deprecated.
The XML output format is far more powerful, and is nearly as
convenient for experienced users. XML is a standard for which
dozens of excellent parsers are available, while grepable
output is my own simple hack. XML is extensible to support
new Nmap features as they are released, while I often must
omit those features from grepable output for lack of a place
to put them.
Nevertheless, grepable output is still quite popular. It is a
simple format that lists each host on one line and can be
trivially searched and parsed with standard Unix tools such
as grep, awk, cut, sed, diff, and Perl. Even I usually use it
for one-off tests done at the command line. Finding all the
hosts with the SSH port open or that are running Solaris
takes only a simple grep to identify the hosts, piped to an
awk or cut command to print the desired fields.
Grepable output consists of comments (lines starting with a
pound (#)) and target lines. A target line includes a
combination of six labeled fields, separated by tabs and
followed with a colon. The fields are Host, Ports, Protocols,
Ignored State, OS, Seq Index, IP ID, and Status.
The most important of these fields is generally Ports, which
gives details on each interesting port. It is a comma
separated list of port entries. Each port entry represents
one interesting port, and takes the form of seven slash (/)
separated subfields. Those subfields are: Port number, State,
Protocol, Owner, Service, SunRPC info, and Version info.
As with XML output, this man page does not allow for
documenting the entire format. A more detailed look at the
Nmap grepable output format is available from
https://nmap.org/book/output-formats-grepable-output.html
-oA basename (Output to all formats)
As a convenience, you may specify -oA basename to store scan
results in normal, XML, and grepable formats at once. They
are stored in basename.nmap, basename.xml, and
basename.gnmap, respectively. As with most programs, you can
prefix the filenames with a directory path, such as
~/nmaplogs/foocorp/ on Unix or c:\hacking\sco on Windows.
Verbosity and debugging options
-v (Increase verbosity level), -vlevel (Set verbosity level)
Increases the verbosity level, causing Nmap to print more
information about the scan in progress. Open ports are shown
as they are found and completion time estimates are provided
when Nmap thinks a scan will take more than a few minutes.
Use it twice or more for even greater verbosity: -vv, or give
a verbosity level directly, for example -v3.
Most changes only affect interactive output, and some also
affect normal and script kiddie output. The other output
types are meant to be processed by machines, so Nmap can give
substantial detail by default in those formats without
fatiguing a human user. However, there are a few changes in
other modes where output size can be reduced substantially by
omitting some detail. For example, a comment line in the
grepable output that provides a list of all ports scanned is
only printed in verbose mode because it can be quite long.
-d (Increase debugging level), -dlevel (Set debugging level)
When even verbose mode doesn't provide sufficient data for
you, debugging is available to flood you with much more! As
with the verbosity option (-v), debugging is enabled with a
command-line flag (-d) and the debug level can be increased
by specifying it multiple times, as in -dd, or by setting a
level directly. For example, -d9 sets level nine. That is the
highest effective level and will produce thousands of lines
unless you run a very simple scan with very few ports and
targets.
Debugging output is useful when a bug is suspected in Nmap,
or if you are simply confused as to what Nmap is doing and
why. As this feature is mostly intended for developers, debug
lines aren't always self-explanatory. You may get something
like: Timeout vals: srtt: -1 rttvar: -1 to: 1000000 delta
14987 ==> srtt: 14987 rttvar: 14987 to: 100000. If you don't
understand a line, your only recourses are to ignore it, look
it up in the source code, or request help from the
development list (nmap-dev). Some lines are self
explanatory, but the messages become more obscure as the
debug level is increased.
--reason (Host and port state reasons)
Shows the reason each port is set to a specific state and the
reason each host is up or down. This option displays the type
of the packet that determined a port or hosts state. For
example, A RST packet from a closed port or an echo reply
from an alive host. The information Nmap can provide is
determined by the type of scan or ping. The SYN scan and SYN
ping (-sS and -PS) are very detailed, but the TCP connect
scan (-sT) is limited by the implementation of the connect
system call. This feature is automatically enabled by the
debug option (-d) and the results are stored in XML log files
even if this option is not specified.
--stats-every time (Print periodic timing stats)
Periodically prints a timing status message after each
interval of time. The time is a specification of the kind
described in the section called 'TIMING AND PERFORMANCE'; so
for example, use --stats-every 10s to get a status update
every 10 seconds. Updates are printed to interactive output
(the screen) and XML output.
--packet-trace (Trace packets and data sent and received)
Causes Nmap to print a summary of every packet sent or
received. This is often used for debugging, but is also a
valuable way for new users to understand exactly what Nmap is
doing under the covers. To avoid printing thousands of lines,
you may want to specify a limited number of ports to scan,
such as -p20-30. If you only care about the goings on of the
version detection subsystem, use --version-trace instead. If
you only care about script tracing, specify --script-trace.
With --packet-trace, you get all of the above.
--open (Show only open (or possibly open) ports)
Sometimes you only care about ports you can actually connect
to (open ones), and don't want results cluttered with closed,
filtered, and closed|filtered ports. Output customization is
normally done after the scan using tools such as grep, awk,
and Perl, but this feature was added due to overwhelming
requests. Specify --open to only see hosts with at least one
open, open|filtered, or unfiltered port, and only see ports
in those states. These three states are treated just as they
normally are, which means that open|filtered and unfiltered
may be condensed into counts if there are an overwhelming
number of them.
Beginning with Nmap 7.40, the --open option implies
--defeat-rst-ratelimit, because that option only affects
closed and filtered ports, which are hidden by --open.
--iflist (List interfaces and routes)
Prints the interface list and system routes as detected by
Nmap and quits. This is useful for debugging routing problems
or device mischaracterization (such as Nmap treating a PPP
connection as ethernet).
Miscellaneous output options
--append-output (Append to rather than clobber output files)
When you specify a filename to an output format flag such as
-oX or -oN, that file is overwritten by default. If you
prefer to keep the existing content of the file and append
the new results, specify the --append-output option. All
output filenames specified in that Nmap execution will then
be appended to rather than clobbered. This doesn't work well
for XML (-oX) scan data as the resultant file generally won't
parse properly until you fix it up by hand.
--resume filename (Resume aborted scan)
Some extensive Nmap runs take a very long time—on the order
of days. Such scans don't always run to completion.
Restrictions may prevent Nmap from being run during working
hours, the network could go down, the machine Nmap is running
on might suffer a planned or unplanned reboot, or Nmap itself
could crash. The administrator running Nmap could cancel it
for any other reason as well, by pressing ctrl-C. Restarting
the whole scan from the beginning may be undesirable.
Fortunately, if scan output files were kept, the user can ask
Nmap to resume scanning with the target it was working on
when execution ceased. Simply specify the --resume option and
pass the output file as its argument. No other arguments are
permitted, as Nmap parses the output file to use the same
ones specified previously. Simply call Nmap as nmap --resume
logfilename. Nmap will append new results to the data files
specified in the previous execution. Scans can be resumed
from any of the 3 major output formats: Normal, Grepable, or
XML
--noninteractive (Disable runtime interactions)
At times, such as when running Nmap in a shell background, it
might be undesirable for Nmap to monitor and respond to user
keyboard input when running. (See the section called 'RUNTIME
INTERACTION' about how to control Nmap during a scan.) Use
option --noninteractive to prevent Nmap taking control of the
terminal.
--stylesheet path or URL (Set XSL stylesheet to transform XML
output)
Nmap ships with an XSL stylesheet named nmap.xsl for viewing
or translating XML output to HTML. The XML output includes
an xml-stylesheet directive which points to nmap.xml where it
was initially installed by Nmap. Run the XML file through an
XSLT processor such as xsltproc--stylesheet. You
must pass the full pathname or URL. One common invocation is
--stylesheet https://nmap.org/svn/docs/nmap.xsl. This tells
an XSLT processor to load the latest version of the
stylesheet from Nmap.Org. The --webxml option does the same
thing with less typing and memorization. Loading the XSL from
Nmap.Org makes it easier to view results on a machine that
doesn't have Nmap (and thus nmap.xsl) installed. So the URL
is often more useful, but the local filesystem location of
nmap.xsl is used by default for privacy reasons.
--webxml (Load stylesheet from Nmap.Org)
This is a convenience option, nothing more than an alias for
--stylesheet https://nmap.org/svn/docs/nmap.xsl.
--no-stylesheet (Omit XSL stylesheet declaration from XML)
Specify this option to prevent Nmap from associating any XSL
stylesheet with its XML output. The xml-stylesheet directive
is omitted.
