файлы конфигурации для Mercurial (configuration files for Mercurial)
SECTIONS
This section describes the different sections that may appear in
a Mercurial configuration file, the purpose of each section, its
possible keys, and their possible values.
alias
Defines command aliases. Aliases allow you to define your own
commands in terms of other commands (or aliases), optionally
including arguments. Positional arguments in the form of $1, $2,
etc in the alias definition are expanded by Mercurial before
execution. Positional arguments not already used by $N in the
definition are put at the end of the command to be executed.
Alias definitions consist of lines of the form:
<alias> = <command> [<argument>]...
For example, this definition:
latest = log --limit 5
creates a new command latest that shows only the five most recent
changesets. You can define subsequent aliases using earlier ones:
stable5 = latest -b stable
Note It is possible to create aliases with the same names as
existing commands, which will then override the original
definitions. This is almost always a bad idea!
An alias can start with an exclamation point (!) to make it a
shell alias. A shell alias is executed with the shell and will
let you run arbitrary commands. As an example,
echo = !echo $@
will let you do hg echo foo to have foo printed in your terminal.
A better example might be:
purge = !$HG status --no-status --unknown -0 | xargs -0 rm
which will make hg purge delete all unknown files in the
repository in the same manner as the purge extension.
Positional arguments like $1, $2, etc. in the alias definition
expand to the command arguments. Unmatched arguments are removed.
$0 expands to the alias name and $@ expands to all arguments
separated by a space. These expansions happen before the command
is passed to the shell.
Shell aliases are executed in an environment where $HG expands to
the path of the Mercurial that was used to execute the alias.
This is useful when you want to call further Mercurial commands
in a shell alias, as was done above for the purge alias. In
addition, $HG_ARGS expands to the arguments given to Mercurial.
In the hg echo foo call above, $HG_ARGS would expand to echo foo.
Note Some global configuration options such as -R are processed
before shell aliases and will thus not be passed to
aliases.
annotate
Settings used when displaying file annotations. All values are
Booleans and default to False. See diff section for related
options for the diff command.
ignorews
Ignore white space when comparing lines.
ignorewsamount
Ignore changes in the amount of white space.
ignoreblanklines
Ignore changes whose lines are all blank.
auth
Authentication credentials for HTTP authentication. This section
allows you to store usernames and passwords for use when logging
into HTTP servers. See the [web] configuration section if you
want to configure who can login to your HTTP server.
Each line has the following format:
<name>.<argument> = <value>
where <name> is used to group arguments into authentication
entries. Example:
foo.prefix = hg.intevation.org/mercurial
foo.username = foo
foo.password = bar
foo.schemes = http https
bar.prefix = secure.example.org
bar.key = path/to/file.key
bar.cert = path/to/file.cert
bar.schemes = https
Supported arguments:
prefix
Either * or a URI prefix with or without the scheme part.
The authentication entry with the longest matching prefix
is used (where * matches everything and counts as a match
of length 1). If the prefix doesn't include a scheme, the
match is performed against the URI with its scheme
stripped as well, and the schemes argument, q.v., is then
subsequently consulted.
username
Optional. Username to authenticate with. If not given, and
the remote site requires basic or digest authentication,
the user will be prompted for it. Environment variables
are expanded in the username letting you do foo.username =
$USER. If the URI includes a username, only [auth] entries
with a matching username or without a username will be
considered.
password
Optional. Password to authenticate with. If not given, and
the remote site requires basic or digest authentication,
the user will be prompted for it.
key
Optional. PEM encoded client certificate key file.
Environment variables are expanded in the filename.
cert
Optional. PEM encoded client certificate chain file.
Environment variables are expanded in the filename.
schemes
Optional. Space separated list of URI schemes to use this
authentication entry with. Only used if the prefix doesn't
include a scheme. Supported schemes are http and https.
They will match static-http and static-https respectively,
as well. Default: https.
If no suitable authentication entry is found, the user is
prompted for credentials as usual if required by the remote.
decode/encode
Filters for transforming files on checkout/checkin. This would
typically be used for newline processing or other
localization/canonicalization of files.
Filters consist of a filter pattern followed by a filter command.
Filter patterns are globs by default, rooted at the repository
root. For example, to match any file ending in .txt in the root
directory only, use the pattern *.txt. To match any file ending
in .c anywhere in the repository, use the pattern **.c. For each
file only the first matching filter applies.
The filter command can start with a specifier, either pipe: or
tempfile:. If no specifier is given, pipe: is used by default.
A pipe: command must accept data on stdin and return the
transformed data on stdout.
Pipe example:
[encode]
# uncompress gzip files on checkin to improve delta compression
# note: not necessarily a good idea, just an example
*.gz = pipe: gunzip
[decode]
# recompress gzip files when writing them to the working dir (we
# can safely omit "pipe:", because it's the default)
*.gz = gzip
A tempfile: command is a template. The string INFILE is replaced
with the name of a temporary file that contains the data to be
filtered by the command. The string OUTFILE is replaced with the
name of an empty temporary file, where the filtered data must be
written by the command.
Note The tempfile mechanism is recommended for Windows systems,
where the standard shell I/O redirection operators often
have strange effects and may corrupt the contents of your
files.
This filter mechanism is used internally by the eol extension to
translate line ending characters between Windows (CRLF) and Unix
(LF) format. We suggest you use the eol extension for
convenience.
defaults
(defaults are deprecated. Don't use them. Use aliases instead)
Use the [defaults] section to define command defaults, i.e. the
default options/arguments to pass to the specified commands.
The following example makes hg log run in verbose mode, and hg
status show only the modified files, by default:
[defaults]
log = -v
status = -m
The actual commands, instead of their aliases, must be used when
defining command defaults. The command defaults will also be
applied to the aliases of the commands defined.
diff
Settings used when displaying diffs. Everything except for
unified is a Boolean and defaults to False. See annotate section
for related options for the annotate command.
git
Use git extended diff format.
nodates
Don't include dates in diff headers.
showfunc
Show which function each change is in.
ignorews
Ignore white space when comparing lines.
ignorewsamount
Ignore changes in the amount of white space.
ignoreblanklines
Ignore changes whose lines are all blank.
unified
Number of lines of context to show.
email
Settings for extensions that send email messages.
from
Optional. Email address to use in "From" header and SMTP
envelope of outgoing messages.
to
Optional. Comma-separated list of recipients' email
addresses.
cc
Optional. Comma-separated list of carbon copy recipients'
email addresses.
bcc
Optional. Comma-separated list of blind carbon copy
recipients' email addresses.
method
Optional. Method to use to send email messages. If value
is smtp (default), use SMTP (see the [smtp] section for
configuration). Otherwise, use as name of program to run
that acts like sendmail (takes -f option for sender, list
of recipients on command line, message on stdin).
Normally, setting this to sendmail or /usr/sbin/sendmail
is enough to use sendmail to send messages.
charsets
Optional. Comma-separated list of character sets
considered convenient for recipients. Addresses, headers,
and parts not containing patches of outgoing messages will
be encoded in the first character set to which conversion
from local encoding ($HGENCODING, ui.fallbackencoding)
succeeds. If correct conversion fails, the text in
question is sent as is. Defaults to empty (explicit) list.
Order of outgoing email character sets:
1. us-ascii: always first, regardless of settings
2. email.charsets: in order given by user
3. ui.fallbackencoding: if not in email.charsets
4. $HGENCODING: if not in email.charsets
5. utf-8: always last, regardless of settings
Email example:
[email]
from = Joseph User <joe.user@example.com>
method = /usr/sbin/sendmail
# charsets for western Europeans
# us-ascii, utf-8 omitted, as they are tried first and last
charsets = iso-8859-1, iso-8859-15, windows-1252
extensions
Mercurial has an extension mechanism for adding new features. To
enable an extension, create an entry for it in this section.
If you know that the extension is already in Python's search
path, you can give the name of the module, followed by =, with
nothing after the =.
Otherwise, give a name that you choose, followed by =, followed
by the path to the .py file (including the file name extension)
that defines the extension.
To explicitly disable an extension that is enabled in an hgrc of
broader scope, prepend its path with !, as in foo = !/ext/path or
foo = ! when path is not supplied.
Example for ~/.hgrc:
[extensions]
# (the mq extension will get loaded from Mercurial's path)
mq =
# (this extension will get loaded from the file specified)
myfeature = ~/.hgext/myfeature.py
format
usestore
Enable or disable the "store" repository format which
improves compatibility with systems that fold case or
otherwise mangle filenames. Enabled by default. Disabling
this option will allow you to store longer filenames in
some situations at the expense of compatibility and
ensures that the on-disk format of newly created
repositories will be compatible with Mercurial before
version 0.9.4.
usefncache
Enable or disable the "fncache" repository format which
enhances the "store" repository format (which has to be
enabled to use fncache) to allow longer filenames and
avoids using Windows reserved names, e.g. "nul". Enabled
by default. Disabling this option ensures that the on-disk
format of newly created repositories will be compatible
with Mercurial before version 1.1.
dotencode
Enable or disable the "dotencode" repository format which
enhances the "fncache" repository format (which has to be
enabled to use dotencode) to avoid issues with filenames
starting with ._ on Mac OS X and spaces on Windows.
Enabled by default. Disabling this option ensures that the
on-disk format of newly created repositories will be
compatible with Mercurial before version 1.7.
graph
Web graph view configuration. This section let you change graph
elements display properties by branches, for instance to make the
default branch stand out.
Each line has the following format:
<branch>.<argument> = <value>
where <branch> is the name of the branch being customized.
Example:
[graph]
# 2px width
default.width = 2
# red color
default.color = FF0000
Supported arguments:
width
Set branch edges width in pixels.
color
Set branch edges color in hexadecimal RGB notation.
hooks
Commands or Python functions that get automatically executed by
various actions such as starting or finishing a commit. Multiple
hooks can be run for the same action by appending a suffix to the
action. Overriding a site-wide hook can be done by changing its
value or setting it to an empty string. Hooks can be prioritized
by adding a prefix of priority to the hook name on a new line and
setting the priority. The default priority is 0 if not
specified.
Example .hg/hgrc:
[hooks]
# update working directory after adding changesets
changegroup.update = hg update
# do not use the site-wide hook
incoming =
incoming.email = /my/email/hook
incoming.autobuild = /my/build/hook
# force autobuild hook to run before other incoming hooks
priority.incoming.autobuild = 1
Most hooks are run with environment variables set that give
useful additional information. For each hook below, the
environment variables it is passed are listed with names of the
form $HG_foo.
changegroup
Run after a changegroup has been added via push, pull or
unbundle. ID of the first new changeset is in $HG_NODE.
URL from which changes came is in $HG_URL.
commit
Run after a changeset has been created in the local
repository. ID of the newly created changeset is in
$HG_NODE. Parent changeset IDs are in $HG_PARENT1 and
$HG_PARENT2.
incoming
Run after a changeset has been pulled, pushed, or
unbundled into the local repository. The ID of the newly
arrived changeset is in $HG_NODE. URL that was source of
changes came is in $HG_URL.
outgoing
Run after sending changes from local repository to
another. ID of first changeset sent is in $HG_NODE. Source
of operation is in $HG_SOURCE; see "preoutgoing" hook for
description.
post-<command>
Run after successful invocations of the associated
command. The contents of the command line are passed as
$HG_ARGS and the result code in $HG_RESULT. Parsed command
line arguments are passed as $HG_PATS and $HG_OPTS. These
contain string representations of the python data
internally passed to <command>. $HG_OPTS is a dictionary
of options (with unspecified options set to their
defaults). $HG_PATS is a list of arguments. Hook failure
is ignored.
pre-<command>
Run before executing the associated command. The contents
of the command line are passed as $HG_ARGS. Parsed command
line arguments are passed as $HG_PATS and $HG_OPTS. These
contain string representations of the data internally
passed to <command>. $HG_OPTS is a dictionary of options
(with unspecified options set to their defaults). $HG_PATS
is a list of arguments. If the hook returns failure, the
command doesn't execute and Mercurial returns the failure
code.
prechangegroup
Run before a changegroup is added via push, pull or
unbundle. Exit status 0 allows the changegroup to proceed.
Non-zero status will cause the push, pull or unbundle to
fail. URL from which changes will come is in $HG_URL.
precommit
Run before starting a local commit. Exit status 0 allows
the commit to proceed. Non-zero status will cause the
commit to fail. Parent changeset IDs are in $HG_PARENT1
and $HG_PARENT2.
prelistkeys
Run before listing pushkeys (like bookmarks) in the
repository. Non-zero status will cause failure. The key
namespace is in $HG_NAMESPACE.
preoutgoing
Run before collecting changes to send from the local
repository to another. Non-zero status will cause failure.
This lets you prevent pull over HTTP or SSH. Also prevents
against local pull, push (outbound) or bundle commands,
but not effective, since you can just copy files instead
then. Source of operation is in $HG_SOURCE. If "serve",
operation is happening on behalf of remote SSH or HTTP
repository. If "push", "pull" or "bundle", operation is
happening on behalf of repository on same system.
prepushkey
Run before a pushkey (like a bookmark) is added to the
repository. Non-zero status will cause the key to be
rejected. The key namespace is in $HG_NAMESPACE, the key
is in $HG_KEY, the old value (if any) is in $HG_OLD, and
the new value is in $HG_NEW.
pretag
Run before creating a tag. Exit status 0 allows the tag to
be created. Non-zero status will cause the tag to fail. ID
of changeset to tag is in $HG_NODE. Name of tag is in
$HG_TAG. Tag is local if $HG_LOCAL=1, in repository if
$HG_LOCAL=0.
pretxnchangegroup
Run after a changegroup has been added via push, pull or
unbundle, but before the transaction has been committed.
Changegroup is visible to hook program. This lets you
validate incoming changes before accepting them. Passed
the ID of the first new changeset in $HG_NODE. Exit status
0 allows the transaction to commit. Non-zero status will
cause the transaction to be rolled back and the push, pull
or unbundle will fail. URL that was source of changes is
in $HG_URL.
pretxncommit
Run after a changeset has been created but the transaction
not yet committed. Changeset is visible to hook program.
This lets you validate commit message and changes. Exit
status 0 allows the commit to proceed. Non-zero status
will cause the transaction to be rolled back. ID of
changeset is in $HG_NODE. Parent changeset IDs are in
$HG_PARENT1 and $HG_PARENT2.
preupdate
Run before updating the working directory. Exit status 0
allows the update to proceed. Non-zero status will prevent
the update. Changeset ID of first new parent is in
$HG_PARENT1. If merge, ID of second new parent is in
$HG_PARENT2.
listkeys
Run after listing pushkeys (like bookmarks) in the
repository. The key namespace is in $HG_NAMESPACE.
$HG_VALUES is a dictionary containing the keys and values.
pushkey
Run after a pushkey (like a bookmark) is added to the
repository. The key namespace is in $HG_NAMESPACE, the key
is in $HG_KEY, the old value (if any) is in $HG_OLD, and
the new value is in $HG_NEW.
tag
Run after a tag is created. ID of tagged changeset is in
$HG_NODE. Name of tag is in $HG_TAG. Tag is local if
$HG_LOCAL=1, in repository if $HG_LOCAL=0.
update
Run after updating the working directory. Changeset ID of
first new parent is in $HG_PARENT1. If merge, ID of second
new parent is in $HG_PARENT2. If the update succeeded,
$HG_ERROR=0. If the update failed (e.g. because conflicts
not resolved), $HG_ERROR=1.
Note It is generally better to use standard hooks rather than
the generic pre- and post- command hooks as they are
guaranteed to be called in the appropriate contexts for
influencing transactions. Also, hooks like "commit" will
be called in all contexts that generate a commit (e.g.
tag) and not just the commit command.
Note Environment variables with empty values may not be passed
to hooks on platforms such as Windows. As an example,
$HG_PARENT2 will have an empty value under Unix-like
platforms for non-merge changesets, while it will not be
available at all under Windows.
The syntax for Python hooks is as follows:
hookname = python:modulename.submodule.callable
hookname = python:/path/to/python/module.py:callable
Python hooks are run within the Mercurial process. Each hook is
called with at least three keyword arguments: a ui object
(keyword ui), a repository object (keyword repo), and a hooktype
keyword that tells what kind of hook is used. Arguments listed as
environment variables above are passed as keyword arguments, with
no HG_ prefix, and names in lower case.
If a Python hook returns a "true" value or raises an exception,
this is treated as a failure.
hostfingerprints
Fingerprints of the certificates of known HTTPS servers. A HTTPS
connection to a server with a fingerprint configured here will
only succeed if the servers certificate matches the fingerprint.
This is very similar to how ssh known hosts works. The
fingerprint is the SHA-1 hash value of the DER encoded
certificate. The CA chain and web.cacerts is not used for
servers with a fingerprint.
For example:
[hostfingerprints]
hg.intevation.org = 44:ed:af:1f:97:11:b6:01:7a:48:45:fc:10:3c:b7:f9:d4:89:2a:9d
This feature is only supported when using Python 2.6 or later.
http_proxy
Used to access web-based Mercurial repositories through a HTTP
proxy.
host
Host name and (optional) port of the proxy server, for
example "myproxy:8000".
no
Optional. Comma-separated list of host names that should
bypass the proxy.
passwd
Optional. Password to authenticate with at the proxy
server.
user
Optional. User name to authenticate with at the proxy
server.
always
Optional. Always use the proxy, even for localhost and any
entries in http_proxy.no. True or False. Default: False.
merge-patterns
This section specifies merge tools to associate with particular
file patterns. Tools matched here will take precedence over the
default merge tool. Patterns are globs by default, rooted at the
repository root.
Example:
[merge-patterns]
**.c = kdiff3
**.jpg = myimgmerge
merge-tools
This section configures external merge tools to use for
file-level merges.
Example ~/.hgrc:
[merge-tools]
# Override stock tool location
kdiff3.executable = ~/bin/kdiff3
# Specify command line
kdiff3.args = $base $local $other -o $output
# Give higher priority
kdiff3.priority = 1
# Define new tool
myHtmlTool.args = -m $local $other $base $output
myHtmlTool.regkey = Software\FooSoftware\HtmlMerge
myHtmlTool.priority = 1
Supported arguments:
priority
The priority in which to evaluate this tool. Default: 0.
executable
Either just the name of the executable or its pathname.
On Windows, the path can use environment variables with
${ProgramFiles} syntax. Default: the tool name.
args
The arguments to pass to the tool executable. You can
refer to the files being merged as well as the output file
through these variables: $base, $local, $other, $output.
Default: $local $base $other
premerge
Attempt to run internal non-interactive 3-way merge tool
before launching external tool. Options are true, false,
or keep to leave markers in the file if the premerge
fails. Default: True
binary
This tool can merge binary files. Defaults to False,
unless tool was selected by file pattern match.
symlink
This tool can merge symlinks. Defaults to False, even if
tool was selected by file pattern match.
check
A list of merge success-checking options:
changed
Ask whether merge was successful when the merged
file shows no changes.
conflicts
Check whether there are conflicts even though the
tool reported success.
prompt
Always prompt for merge success, regardless of
success reported by tool.
fixeol
Attempt to fix up EOL changes caused by the merge tool.
Default: False
gui
This tool requires a graphical interface to run. Default:
False
regkey
Windows registry key which describes install location of
this tool. Mercurial will search for this key first under
HKEY_CURRENT_USER and then under HKEY_LOCAL_MACHINE.
Default: None
regkeyalt
An alternate Windows registry key to try if the first key
is not found. The alternate key uses the same regname and
regappend semantics of the primary key. The most common
use for this key is to search for 32bit applications on
64bit operating systems. Default: None
regname
Name of value to read from specified registry key.
Defaults to the unnamed (default) value.
regappend
String to append to the value read from the registry,
typically the executable name of the tool. Default: None
patch
Settings used when applying patches, for instance through the
'import' command or with Mercurial Queues extension.
eol
When set to 'strict' patch content and patched files end
of lines are preserved. When set to lf or crlf, both files
end of lines are ignored when patching and the result line
endings are normalized to either LF (Unix) or CRLF
(Windows). When set to auto, end of lines are again
ignored while patching but line endings in patched files
are normalized to their original setting on a per-file
basis. If target file does not exist or has no end of
line, patch line endings are preserved. Default: strict.
paths
Assigns symbolic names to repositories. The left side is the
symbolic name, and the right gives the directory or URL that is
the location of the repository. Default paths can be declared by
setting the following entries.
default
Directory or URL to use when pulling if no source is
specified. Default is set to repository from which the
current repository was cloned.
default-push
Optional. Directory or URL to use when pushing if no
destination is specified.
Custom paths can be defined by assigning the path to a name that
later can be used from the command line. Example:
[paths]
my_path = http://example.com/path
To push to the path defined in my_path run the command:
hg push my_path
phases
Specifies default handling of phases. See hg help phases for more
information about working with phases.
publish
Controls draft phase behavior when working as a server.
When true, pushed changesets are set to public in both
client and server and pulled or cloned changesets are set
to public in the client. Default: True
new-commit
Phase of newly-created commits. Default: draft
profiling
Specifies profiling type, format, and file output. Two profilers
are supported: an instrumenting profiler (named ls), and a
sampling profiler (named stat).
In this section description, 'profiling data' stands for the raw
data collected during profiling, while 'profiling report' stands
for a statistical text report generated from the profiling data.
The profiling is done using lsprof.
type
The type of profiler to use. Default: ls.
ls
Use Python's built-in instrumenting profiler. This
profiler works on all platforms, but each line
number it reports is the first line of a function.
This restriction makes it difficult to identify the
expensive parts of a non-trivial function.
stat
Use a third-party statistical profiler, statprof.
This profiler currently runs only on Unix systems,
and is most useful for profiling commands that run
for longer than about 0.1 seconds.
format
Profiling format. Specific to the ls instrumenting
profiler. Default: text.
text
Generate a profiling report. When saving to a file,
it should be noted that only the report is saved,
and the profiling data is not kept.
kcachegrind
Format profiling data for kcachegrind use: when
saving to a file, the generated file can directly
be loaded into kcachegrind.
frequency
Sampling frequency. Specific to the stat sampling
profiler. Default: 1000.
output
File path where profiling data or report should be saved.
If the file exists, it is replaced. Default: None, data is
printed on stderr
sort
Sort field. Specific to the ls instrumenting profiler.
One of callcount, reccallcount, totaltime and inlinetime.
Default: inlinetime.
limit
Number of lines to show. Specific to the ls instrumenting
profiler. Default: 30.
nested
Show at most this number of lines of drill-down info after
each main entry. This can help explain the difference
between Total and Inline. Specific to the ls
instrumenting profiler. Default: 5.
revsetalias
Alias definitions for revsets. See hg help revsets for details.
server
Controls generic server settings.
uncompressed
Whether to allow clients to clone a repository using the
uncompressed streaming protocol. This transfers about 40%
more data than a regular clone, but uses less memory and
CPU on both server and client. Over a LAN (100 Mbps or
better) or a very fast WAN, an uncompressed streaming
clone is a lot faster (~10x) than a regular clone. Over
most WAN connections (anything slower than about 6 Mbps),
uncompressed streaming is slower, because of the extra
data transfer overhead. This mode will also temporarily
hold the write lock while determining what data to
transfer. Default is True.
preferuncompressed
When set, clients will try to use the uncompressed
streaming protocol. Default is False.
validate
Whether to validate the completeness of pushed changesets
by checking that all new file revisions specified in
manifests are present. Default is False.
smtp
Configuration for extensions that need to send email messages.
host
Host name of mail server, e.g. "mail.example.com".
port
Optional. Port to connect to on mail server. Default: 465
(if tls is smtps) or 25 (otherwise).
tls
Optional. Method to enable TLS when connecting to mail
server: starttls, smtps or none. Default: none.
verifycert
Optional. Verification for the certificate of mail server,
when tls is starttls or smtps. "strict", "loose" or False.
For "strict" or "loose", the certificate is verified as
same as the verification for HTTPS connections (see
[hostfingerprints] and [web] cacerts also). For "strict",
sending email is also aborted, if there is no
configuration for mail server in [hostfingerprints] and
[web] cacerts. --insecure for hg email overwrites this as
"loose". Default: "strict".
username
Optional. User name for authenticating with the SMTP
server. Default: none.
password
Optional. Password for authenticating with the SMTP
server. If not specified, interactive sessions will prompt
the user for a password; non-interactive sessions will
fail. Default: none.
local_hostname
Optional. It's the hostname that the sender can use to
identify itself to the MTA.
subpaths
Subrepository source URLs can go stale if a remote server changes
name or becomes temporarily unavailable. This section lets you
define rewrite rules of the form:
<pattern> = <replacement>
where pattern is a regular expression matching a subrepository
source URL and replacement is the replacement string used to
rewrite it. Groups can be matched in pattern and referenced in
replacements. For instance:
http://server/(.*)-hg/ = http://hg.server/\1/
rewrites http://server/foo-hg/ into http://hg.server/foo/ .
Relative subrepository paths are first made absolute, and the
rewrite rules are then applied on the full (absolute) path. The
rules are applied in definition order.
trusted
Mercurial will not use the settings in the .hg/hgrc file from a
repository if it doesn't belong to a trusted user or to a trusted
group, as various hgrc features allow arbitrary commands to be
run. This issue is often encountered when configuring hooks or
extensions for shared repositories or servers. However, the web
interface will use some safe settings from the [web] section.
This section specifies what users and groups are trusted. The
current user is always trusted. To trust everybody, list a user
or a group with name *. These settings must be placed in an
already-trusted file to take effect, such as $HOME/.hgrc of the
user or service running Mercurial.
users
Comma-separated list of trusted users.
groups
Comma-separated list of trusted groups.
ui
User interface controls.
archivemeta
Whether to include the .hg_archival.txt file containing
meta data (hashes for the repository base and for tip) in
archives created by the hg archive command or downloaded
via hgweb. Default is True.
askusername
Whether to prompt for a username when committing. If True,
and neither $HGUSER nor $EMAIL has been specified, then
the user will be prompted to enter a username. If no
username is entered, the default USER@HOST is used
instead. Default is False.
commitsubrepos
Whether to commit modified subrepositories when committing
the parent repository. If False and one subrepository has
uncommitted changes, abort the commit. Default is False.
debug
Print debugging information. True or False. Default is
False.
editor
The editor to use during a commit. Default is $EDITOR or
vi.
fallbackencoding
Encoding to try if it's not possible to decode the
changelog using UTF-8. Default is ISO-8859-1.
ignore
A file to read per-user ignore patterns from. This file
should be in the same format as a repository-wide
.hgignore file. This option supports hook syntax, so if
you want to specify multiple ignore files, you can do so
by setting something like ignore.other = ~/.hgignore2. For
details of the ignore file format, see the hgignore(5) man
page.
interactive
Allow to prompt the user. True or False. Default is True.
logtemplate
Template string for commands that print changesets.
merge
The conflict resolution program to use during a manual
merge. For more information on merge tools see hg help
merge-tools. For configuring merge tools see the
[merge-tools] section.
portablefilenames
Check for portable filenames. Can be warn, ignore or
abort. Default is warn. If set to warn (or true), a
warning message is printed on POSIX platforms, if a file
with a non-portable filename is added (e.g. a file with a
name that can't be created on Windows because it contains
reserved parts like AUX, reserved characters like :, or
would cause a case collision with an existing file). If
set to ignore (or false), no warning is printed. If set
to abort, the command is aborted. On Windows, this
configuration option is ignored and the command aborted.
quiet
Reduce the amount of output printed. True or False.
Default is False.
remotecmd
remote command to use for clone/push/pull operations.
Default is hg.
reportoldssl
Warn if an SSL certificate is unable to be due to using
Python 2.5 or earlier. True or False. Default is True.
report_untrusted
Warn if a .hg/hgrc file is ignored due to not being owned
by a trusted user or group. True or False. Default is
True.
slash
Display paths using a slash (/) as the path separator.
This only makes a difference on systems where the default
path separator is not the slash character (e.g. Windows
uses the backslash character (\)). Default is False.
ssh
command to use for SSH connections. Default is ssh.
strict
Require exact command names, instead of allowing
unambiguous abbreviations. True or False. Default is
False.
style
Name of style to use for command output.
timeout
The timeout used when a lock is held (in seconds), a
negative value means no timeout. Default is 600.
traceback
Mercurial always prints a traceback when an unknown
exception occurs. Setting this to True will make Mercurial
print a traceback on all exceptions, even those recognized
by Mercurial (such as IOError or MemoryError). Default is
False.
username
The committer of a changeset created when running
"commit". Typically a person's name and email address,
e.g. Fred Widget <fred@example.com>. Default is $EMAIL or
username@hostname. If the username in hgrc is empty, it
has to be specified manually or in a different hgrc file
(e.g. $HOME/.hgrc, if the admin set username = in the
system hgrc). Environment variables in the username are
expanded.
verbose
Increase the amount of output printed. True or False.
Default is False.
web
Web interface configuration. The settings in this section apply
to both the builtin webserver (started by hg serve) and the
script you run through a webserver (hgweb.cgi and the derivatives
for FastCGI and WSGI).
The Mercurial webserver does no authentication (it does not
prompt for usernames and passwords to validate who users are),
but it does do authorization (it grants or denies access for
authenticated users based on settings in this section). You must
either configure your webserver to do authentication for you, or
disable the authorization checks.
For a quick setup in a trusted environment, e.g., a private LAN,
where you want it to accept pushes from anybody, you can use the
following command line:
$ hg --config web.allow_push=* --config web.push_ssl=False serve
Note that this will allow anybody to push anything to the server
and that this should not be used for public servers.
The full set of options is:
accesslog
Where to output the access log. Default is stdout.
address
Interface address to bind to. Default is all.
allow_archive
List of archive format (bz2, gz, zip) allowed for
downloading. Default is empty.
allowbz2
(DEPRECATED) Whether to allow .tar.bz2 downloading of
repository revisions. Default is False.
allowgz
(DEPRECATED) Whether to allow .tar.gz downloading of
repository revisions. Default is False.
allowpull
Whether to allow pulling from the repository. Default is
True.
allow_push
Whether to allow pushing to the repository. If empty or
not set, push is not allowed. If the special value *, any
remote user can push, including unauthenticated users.
Otherwise, the remote user must have been authenticated,
and the authenticated user name must be present in this
list. The contents of the allow_push list are examined
after the deny_push list.
allow_read
If the user has not already been denied repository access
due to the contents of deny_read, this list determines
whether to grant repository access to the user. If this
list is not empty, and the user is unauthenticated or not
present in the list, then access is denied for the user.
If the list is empty or not set, then access is permitted
to all users by default. Setting allow_read to the special
value * is equivalent to it not being set (i.e. access is
permitted to all users). The contents of the allow_read
list are examined after the deny_read list.
allowzip
(DEPRECATED) Whether to allow .zip downloading of
repository revisions. Default is False. This feature
creates temporary files.
archivesubrepos
Whether to recurse into subrepositories when archiving.
Default is False.
baseurl
Base URL to use when publishing URLs in other locations,
so third-party tools like email notification hooks can
construct URLs. Example: http://hgserver/repos/ .
cacerts
Path to file containing a list of PEM encoded certificate
authority certificates. Environment variables and ~user
constructs are expanded in the filename. If specified on
the client, then it will verify the identity of remote
HTTPS servers with these certificates.
This feature is only supported when using Python 2.6 or
later. If you wish to use it with earlier versions of
Python, install the backported version of the ssl library
that is available from http://pypi.python.org .
To disable SSL verification temporarily, specify
--insecure from command line.
You can use OpenSSL's CA certificate file if your platform
has one. On most Linux systems this will be
/etc/ssl/certs/ca-certificates.crt. Otherwise you will
have to generate this file manually. The form must be as
follows:
-----BEGIN CERTIFICATE-----
... (certificate in base64 PEM encoding) ...
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
... (certificate in base64 PEM encoding) ...
-----END CERTIFICATE-----
cache
Whether to support caching in hgweb. Defaults to True.
collapse
With descend enabled, repositories in subdirectories are
shown at a single level alongside repositories in the
current path. With collapse also enabled, repositories
residing at a deeper level than the current path are
grouped behind navigable directory entries that lead to
the locations of these repositories. In effect, this
setting collapses each collection of repositories found
within a subdirectory into a single entry for that
subdirectory. Default is False.
comparisoncontext
Number of lines of context to show in side-by-side file
comparison. If negative or the value full, whole files are
shown. Default is 5. This setting can be overridden by a
context request parameter to the comparison command,
taking the same values.
contact
Name or email address of the person in charge of the
repository. Defaults to ui.username or $EMAIL or
"unknown" if unset or empty.
deny_push
Whether to deny pushing to the repository. If empty or not
set, push is not denied. If the special value *, all
remote users are denied push. Otherwise, unauthenticated
users are all denied, and any authenticated user name
present in this list is also denied. The contents of the
deny_push list are examined before the allow_push list.
deny_read
Whether to deny reading/viewing of the repository. If this
list is not empty, unauthenticated users are all denied,
and any authenticated user name present in this list is
also denied access to the repository. If set to the
special value *, all remote users are denied access
(rarely needed ;). If deny_read is empty or not set, the
determination of repository access depends on the presence
and content of the allow_read list (see description). If
both deny_read and allow_read are empty or not set, then
access is permitted to all users by default. If the
repository is being served via hgwebdir, denied users will
not be able to see it in the list of repositories. The
contents of the deny_read list have priority over (are
examined before) the contents of the allow_read list.
descend
hgwebdir indexes will not descend into subdirectories.
Only repositories directly in the current path will be
shown (other repositories are still available from the
index corresponding to their containing path).
description
Textual description of the repository's purpose or
contents. Default is "unknown".
encoding
Character encoding name. Default is the current locale
charset. Example: "UTF-8"
errorlog
Where to output the error log. Default is stderr.
guessmime
Control MIME types for raw download of file content. Set
to True to let hgweb guess the content type from the file
extension. This will serve HTML files as text/html and
might allow cross-site scripting attacks when serving
untrusted repositories. Default is False.
hidden
Whether to hide the repository in the hgwebdir index.
Default is False.
ipv6
Whether to use IPv6. Default is False.
logoimg
File name of the logo image that some templates display on
each page. The file name is relative to staticurl. That
is, the full path to the logo image is
"staticurl/logoimg". If unset, hglogo.png will be used.
logourl
Base URL to use for logos. If unset,
http://mercurial.selenic.com/ will be used.
maxchanges
Maximum number of changes to list on the changelog.
Default is 10.
maxfiles
Maximum number of files to list per changeset. Default is
10.
maxshortchanges
Maximum number of changes to list on the shortlog, graph
or filelog pages. Default is 60.
name
Repository name to use in the web interface. Default is
current working directory.
port
Port to listen on. Default is 8000.
prefix
Prefix path to serve from. Default is '' (server root).
push_ssl
Whether to require that inbound pushes be transported over
SSL to prevent password sniffing. Default is True.
staticurl
Base URL to use for static files. If unset, static files
(e.g. the hgicon.png favicon) will be served by the CGI
script itself. Use this setting to serve them directly
with the HTTP server. Example: http://hgserver/static/ .
stripes
How many lines a "zebra stripe" should span in multi-line
output. Default is 1; set to 0 to disable.
style
Which template map style to use.
templates
Where to find the HTML templates. Default is install path.
websub
Web substitution filter definition. You can use this section to
define a set of regular expression substitution patterns which
let you automatically modify the hgweb server output.
The default hgweb templates only apply these substitution
patterns on the revision description fields. You can apply them
anywhere you want when you create your own templates by adding
calls to the "websub" filter (usually after calling the "escape"
filter).
This can be used, for example, to convert issue references to
links to your issue tracker, or to convert "markdown-like" syntax
into HTML (see the examples below).
Each entry in this section names a substitution filter. The
value of each entry defines the substitution expression itself.
The websub expressions follow the old interhg extension syntax,
which in turn imitates the Unix sed replacement syntax:
patternname = s/SEARCH_REGEX/REPLACE_EXPRESSION/[i]
You can use any separator other than "/". The final "i" is
optional and indicates that the search must be case insensitive.
Examples:
[websub]
issues = s|issue(\d+)|<a href="http://bts.example.org/issue\1">issue\1</a>|i
italic = s/\b_(\S+)_\b/<i>\1<\/i>/
bold = s/\*\b(\S+)\b\*/<b>\1<\/b>/
worker
Parallel master/worker configuration. We currently perform
working directory updates in parallel on Unix-like systems, which
greatly helps performance.
numcpus
Number of CPUs to use for parallel operations. Default is
4 or the number of CPUs on the system, whichever is
larger. A zero or negative value is treated as use the
default.
