схема базы данных OVN_Southbound (OVN_Southbound database schema)
Connection TABLE
Configuration for a database connection to an Open vSwitch
database (OVSDB) client.
This table primarily configures the Open vSwitch database server
(ovsdb-server).
The Open vSwitch database server can initiate and maintain active
connections to remote clients. It can also listen for database
connections.
Summary:
Core Features:
target string (must be unique within
table)
read_only boolean
role string
Client Failure Detection and Handling:
max_backoff optional integer, at least 1,000
inactivity_probe optional integer
Status:
is_connected boolean
status : last_error optional string
status : state optional string, one of ACTIVE,
BACKOFF, CONNECTING, IDLE, or VOID
status : sec_since_connect optional string, containing an
integer, at least 0
status : sec_since_disconnect
optional string, containing an
integer, at least 0
status : locks_held optional string
status : locks_waiting optional string
status : locks_lost optional string
status : n_connections optional string, containing an
integer, at least 2
status : bound_port optional string, containing an
integer
Common Columns:
external_ids map of string-string pairs
other_config map of string-string pairs
Details:
Core Features:
target: string (must be unique within table)
Connection methods for clients.
The following connection methods are currently supported:
ssl:host[:port]
The specified SSL port on the given host, which can
either be a DNS name (if built with unbound
library) or an IP address. A valid SSL
configuration must be provided when this form is
used, this configuration can be specified via
command-line options or the SSL table.
If port is not specified, it defaults to 6640.
SSL support is an optional feature that is not
always built as part of Open vSwitch.
tcp:host[:port]
The specified TCP port on the given host, which can
either be a DNS name (if built with unbound
library) or an IP address (IPv4 or IPv6). If host
is an IPv6 address, wrap it in square brackets,
e.g. tcp:[::1]:6640.
If port is not specified, it defaults to 6640.
pssl:[port][:host]
Listens for SSL connections on the specified TCP
port. Specify 0 for port to have the kernel
automatically choose an available port. If host,
which can either be a DNS name (if built with
unbound library) or an IP address, is specified,
then connections are restricted to the resolved or
specified local IP address (either IPv4 or IPv6
address). If host is an IPv6 address, wrap in
square brackets, e.g. pssl:6640:[::1]. If host is
not specified then it listens only on IPv4 (but not
IPv6) addresses. A valid SSL configuration must be
provided when this form is used, this can be
specified either via command-line options or the
SSL table.
If port is not specified, it defaults to 6640.
SSL support is an optional feature that is not
always built as part of Open vSwitch.
ptcp:[port][:host]
Listens for connections on the specified TCP port.
Specify 0 for port to have the kernel automatically
choose an available port. If host, which can either
be a DNS name (if built with unbound library) or an
IP address, is specified, then connections are
restricted to the resolved or specified local IP
address (either IPv4 or IPv6 address). If host is
an IPv6 address, wrap it in square brackets, e.g.
ptcp:6640:[::1]. If host is not specified then it
listens only on IPv4 addresses.
If port is not specified, it defaults to 6640.
When multiple clients are configured, the target values
must be unique. Duplicate target values yield unspecified
results.
read_only: boolean
true to restrict these connections to read-only
transactions, false to allow them to modify the database.
role: string
String containing role name for this connection entry.
Client Failure Detection and Handling:
max_backoff: optional integer, at least 1,000
Maximum number of milliseconds to wait between connection
attempts. Default is implementation-specific.
inactivity_probe: optional integer
Maximum number of milliseconds of idle time on connection
to the client before sending an inactivity probe message.
If Open vSwitch does not communicate with the client for
the specified number of seconds, it will send a probe. If
a response is not received for the same additional amount
of time, Open vSwitch assumes the connection has been
broken and attempts to reconnect. Default is
implementation-specific. A value of 0 disables inactivity
probes.
Status:
Key-value pair of is_connected is always updated. Other key-value
pairs in the status columns may be updated depends on the target
type.
When target specifies a connection method that listens for
inbound connections (e.g. ptcp: or punix:), both n_connections
and is_connected may also be updated while the remaining key-
value pairs are omitted.
On the other hand, when target specifies an outbound connection,
all key-value pairs may be updated, except the above-mentioned
two key-value pairs associated with inbound connection targets.
They are omitted.
is_connected: boolean
true if currently connected to this client, false
otherwise.
status : last_error: optional string
A human-readable description of the last error on the
connection to the manager; i.e. strerror(errno). This key
will exist only if an error has occurred.
status : state: optional string, one of ACTIVE, BACKOFF,
CONNECTING, IDLE, or VOID
The state of the connection to the manager:
VOID Connection is disabled.
BACKOFF
Attempting to reconnect at an increasing period.
CONNECTING
Attempting to connect.
ACTIVE Connected, remote host responsive.
IDLE Connection is idle. Waiting for response to keep-
alive.
These values may change in the future. They are provided
only for human consumption.
status : sec_since_connect: optional string, containing an
integer, at least 0
The amount of time since this client last successfully
connected to the database (in seconds). Value is empty if
client has never successfully been connected.
status : sec_since_disconnect: optional string, containing an
integer, at least 0
The amount of time since this client last disconnected
from the database (in seconds). Value is empty if client
has never disconnected.
status : locks_held: optional string
Space-separated list of the names of OVSDB locks that the
connection holds. Omitted if the connection does not hold
any locks.
status : locks_waiting: optional string
Space-separated list of the names of OVSDB locks that the
connection is currently waiting to acquire. Omitted if the
connection is not waiting for any locks.
status : locks_lost: optional string
Space-separated list of the names of OVSDB locks that the
connection has had stolen by another OVSDB client. Omitted
if no locks have been stolen from this connection.
status : n_connections: optional string, containing an integer,
at least 2
When target specifies a connection method that listens for
inbound connections (e.g. ptcp: or pssl:) and more than
one connection is actually active, the value is the number
of active connections. Otherwise, this key-value pair is
omitted.
status : bound_port: optional string, containing an integer
When target is ptcp: or pssl:, this is the TCP port on
which the OVSDB server is listening. (This is particularly
useful when target specifies a port of 0, allowing the
kernel to choose any available port.)
Common Columns:
The overall purpose of these columns is described under Common
Columns at the beginning of this document.
external_ids: map of string-string pairs
other_config: map of string-string pairs
