Платформа для прототипирования электроники с открытым исходным кодом - Write code and upload it to your Arduino-compatible board
[ О приложении ]

Arduino is an open-source physical computing platform based on a simple I/O board and a development environment that implements the Processing/Wiring language.
Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g.
Flash, Processing and MaxMSP).
The boards can be assembled by hand or purchased preassembled at https://arduino.cc

**Setup**

In order to upload code an arduino board over USB, you need to add your user to the `dialout` group.
Open a terminal window, run the following command and *reboot* your computer.

> `sudo usermod -a -G dialout $USER`

Now restart your computer and you're good to go!

If you have one of the following boards, you need to grant specific permissions to your user for accessing directly the USB.
This issue is more detailed [here](https://github.com/snapcrafters/arduino/issues/10#issuecomment-716683018)

- Arduino Uno WiFi Rev2, ATMEGA328

For granting this direct access:

```

echo "SUBSYSTEM==\"usb\", MODE=\"0660\", GROUP=\"$(id -gn)\"" | sudo tee /etc/udev/rules.d/00-usb-permissions.rules

udevadm control --reload-rules

```

**Python 3 support**

This version of Arduino IDE runs in a sandbox for improved security and stability.
As a result, it does not have access to the Python libraries on your device.

Python 3 and the `serial` library are installed inside of the sandbox so they can be used by plugins.
If a plugin needs additional Python 3 libraries, you can install them using the `arduino.pip` command.
For example, the following command installs the `requests` library inside of the sandbox so the Arduino IDE can use it.

> `arduino.pip install requests`

Python 2 is currently not supported in this package because it reached end of life on January 1st 2020.
If you have hardware that _requires_ Python 2 support, please let us know.

**Are you having issues?**

Let us know by creating a new issue here: https://github.com/snapcrafters/arduino/issues

Источник
Репозиторий: Snap