настройки контейнера (Container settings)
Имя (Name)
systemd.nspawn - Container settings
Синопсис (Synopsis)
/etc/systemd/nspawn/machine.nspawn
/run/systemd/nspawn/machine.nspawn
/var/lib/machines/machine.nspawn
Описание (Description)
An nspawn container settings file (suffix .nspawn) contains
runtime configuration for a local container, and is used used by
systemd-nspawn(1). Files of this type are named after the
containers they define settings for. They are optional, and only
required for containers whose execution environment shall differ
from the defaults. Files of this type mostly contain settings
that may also be set on the systemd-nspawn command line, and make
it easier to persistently attach specific settings to specific
containers. The syntax of these files is inspired by .desktop
files, similarly to other configuration files supported by the
systemd project. See systemd.syntax(7) for an overview.
NSPAWN FILE DISCOVERY
Files are searched for by appending the .nspawn suffix to the
machine name of the container, as specified with the --machine=
switch of systemd-nspawn, or derived from the directory or image
file name. This file is first searched for in
/etc/systemd/nspawn/ and /run/systemd/nspawn/. If found there,
the settings are read and all of them take full effect (but may
still be overridden by corresponding command line arguments).
Otherwise, the file will then be searched for next to the image
file or in the immediate parent of the root directory of the
container. If the file is found there, only a subset of the
settings will take effect however. All settings that possibly
elevate privileges or grant additional access to resources of the
host (such as files or directories) are ignored. To which options
this applies is documented below.
Persistent settings files created and maintained by the
administrator (and thus trusted) should be placed in
/etc/systemd/nspawn/, while automatically downloaded (and thus
potentially untrusted) settings files are placed in
/var/lib/machines/ instead (next to the container images), where
their security impact is limited. In order to add privileged
settings to .nspawn files acquired from the image vendor, it is
recommended to copy the settings files into /etc/systemd/nspawn/
and edit them there, so that the privileged options become
available. The precise algorithm for how the files are searched
and interpreted may be configured with systemd-nspawn's
--settings= switch, see systemd-nspawn(1) for details.
[EXEC] SECTION OPTIONS
Settings files may include an [Exec] section, which carries
various execution parameters:
Boot=
Takes a boolean argument, which defaults to off. If enabled,
systemd-nspawn will automatically search for an init
executable and invoke it. In this case, the specified
parameters using Parameters= are passed as additional
arguments to the init process. This setting corresponds to
the --boot switch on the systemd-nspawn command line. This
option may not be combined with ProcessTwo=yes. This option
is specified by default in the systemd-nspawn@.service
template unit.
Ephemeral=
Takes a boolean argument, which defaults to off, If enabled,
the container is run with a temporary snapshot of its file
system that is removed immediately when the container
terminates. This is equivalent to the --ephemeral command
line switch. See systemd-nspawn(1) for details about the
specific options supported.
ProcessTwo=
Takes a boolean argument, which defaults to off. If enabled,
the specified program is run as PID 2. A stub init process is
run as PID 1. This setting corresponds to the --as-pid2
switch on the systemd-nspawn command line. This option may
not be combined with Boot=yes.
Parameters=
Takes a whitespace-separated list of arguments. Single ("'")
and double (""") quotes may be used around arguments with
whitespace. This is either a command line, beginning with the
binary name to execute, or – if Boot= is enabled – the list
of arguments to pass to the init process. This setting
corresponds to the command line parameters passed on the
systemd-nspawn command line.
Note: Boot=no, Parameters=a b "c c" is the same as
systemd-nspawn a b "c c", and Boot=yes, Parameters=b 'c c' is
the same as systemd-nspawn --boot b 'c c'.
Environment=
Takes an environment variable assignment consisting of key
and value, separated by "=". Sets an environment variable for
the main process invoked in the container. This setting may
be used multiple times to set multiple environment variables.
It corresponds to the --setenv= command line switch.
User=
Takes a UNIX user name. Specifies the user name to invoke the
main process of the container as. This user must be known in
the container's user database. This corresponds to the
--user= command line switch.
WorkingDirectory=
Selects the working directory for the process invoked in the
container. Expects an absolute path in the container's file
system namespace. This corresponds to the --chdir= command
line switch.
PivotRoot=
Selects a directory to pivot to / inside the container when
starting up. Takes a single path, or a pair of two paths
separated by a colon. Both paths must be absolute, and are
resolved in the container's file system namespace. This
corresponds to the --pivot-root= command line switch.
Capability=, DropCapability=
Takes a space-separated list of Linux process capabilities
(see capabilities(7) for details). The Capability= setting
specifies additional capabilities to pass on top of the
default set of capabilities. The DropCapability= setting
specifies capabilities to drop from the default set. These
settings correspond to the --capability= and
--drop-capability= command line switches. Note that
Capability= is a privileged setting, and only takes effect in
.nspawn files in /etc/systemd/nspawn/ and /run/system/nspawn/
(see above). On the other hand, DropCapability= takes effect
in all cases. If the special value "all" is passed, all
capabilities are retained (or dropped).
These settings change the bounding set of capabilities which
also limits the ambient capabilities as given with the
AmbientCapability=.
AmbientCapability=
Takes a space-separated list of Linux process capabilities
(see capabilities(7) for details). The AmbientCapability=
setting specifies capability which will be passed to the
started program in the inheritable and ambient capability
sets. This will grant these capabilities to this process.
This setting correspond to the --ambient-capability= command
line switch.
The value "all" is not supported for this setting.
The setting of AmbientCapability= must be covered by the
bounding set settings which were established by Capability=
and DropCapability=.
Note that AmbientCapability= is a privileged setting (see
above).
NoNewPrivileges=
Takes a boolean argument that controls the
PR_SET_NO_NEW_PRIVS flag for the container payload. This is
equivalent to the --no-new-privileges= command line switch.
See systemd-nspawn(1) for details.
KillSignal=
Specify the process signal to send to the container's PID 1
when nspawn itself receives SIGTERM, in order to trigger an
orderly shutdown of the container. Defaults to SIGRTMIN+3 if
Boot= is used (on systemd-compatible init systems SIGRTMIN+3
triggers an orderly shutdown). For a list of valid signals,
see signal(7).
Personality=
Configures the kernel personality for the container. This is
equivalent to the --personality= switch.
MachineID=
Configures the 128-bit machine ID (UUID) to pass to the
container. This is equivalent to the --uuid= command line
switch. This option is privileged (see above).
PrivateUsers=
Configures support for usernamespacing. This is equivalent to
the --private-users= command line switch, and takes the same
options. This option is privileged (see above). This option
is the default if the systemd-nspawn@.service template unit
file is used.
NotifyReady=
Configures support for notifications from the container's
init process. This is equivalent to the --notify-ready=
command line switch, and takes the same parameters. See
systemd-nspawn(1) for details about the specific options
supported.
SystemCallFilter=
Configures the system call filter applied to containers. This
is equivalent to the --system-call-filter= command line
switch, and takes the same list parameter. See
systemd-nspawn(1) for details.
LimitCPU=, LimitFSIZE=, LimitDATA=, LimitSTACK=, LimitCORE=,
LimitRSS=, LimitNOFILE=, LimitAS=, LimitNPROC=, LimitMEMLOCK=,
LimitLOCKS=, LimitSIGPENDING=, LimitMSGQUEUE=, LimitNICE=,
LimitRTPRIO=, LimitRTTIME=
Configures various types of resource limits applied to
containers. This is equivalent to the --rlimit= command line
switch, and takes the same arguments. See systemd-nspawn(1)
for details.
OOMScoreAdjust=
Configures the OOM score adjustment value. This is equivalent
to the --oom-score-adjust= command line switch, and takes the
same argument. See systemd-nspawn(1) for details.
CPUAffinity=
Configures the CPU affinity. This is equivalent to the
--cpu-affinity= command line switch, and takes the same
argument. See systemd-nspawn(1) for details.
Hostname=
Configures the kernel hostname set for the container. This is
equivalent to the --hostname= command line switch, and takes
the same argument. See systemd-nspawn(1) for details.
ResolvConf=
Configures how /etc/resolv.conf in the container shall be
handled. This is equivalent to the --resolv-conf= command
line switch, and takes the same argument. See
systemd-nspawn(1) for details.
Timezone=
Configures how /etc/localtime in the container shall be
handled. This is equivalent to the --timezone= command line
switch, and takes the same argument. See systemd-nspawn(1)
for details.
LinkJournal=
Configures how to link host and container journal setups.
This is equivalent to the --link-journal= command line
switch, and takes the same parameter. See systemd-nspawn(1)
for details.
[FILES] SECTION OPTIONS
Settings files may include a [Files] section, which carries
various parameters configuring the file system of the container:
ReadOnly=
Takes a boolean argument, which defaults to off. If
specified, the container will be run with a read-only file
system. This setting corresponds to the --read-only command
line switch.
Volatile=
Takes a boolean argument, or the special value "state". This
configures whether to run the container with volatile state
and/or configuration. This option is equivalent to
--volatile=, see systemd-nspawn(1) for details about the
specific options supported.
Bind=, BindReadOnly=
Adds a bind mount from the host into the container. Takes a
single path, a pair of two paths separated by a colon, or a
triplet of two paths plus an option string separated by
colons. This option may be used multiple times to configure
multiple bind mounts. This option is equivalent to the
command line switches --bind= and --bind-ro=, see
systemd-nspawn(1) for details about the specific options
supported. This setting is privileged (see above).
BindUser=
Binds a user from the host into the container. This option is
equivalent to the command line switch --bind-user=, see
systemd-nspawn(1) for details about the specific options
supported. This setting is privileged (see above).
TemporaryFileSystem=
Adds a "tmpfs" mount to the container. Takes a path or a pair
of path and option string, separated by a colon. This option
may be used multiple times to configure multiple "tmpfs"
mounts. This option is equivalent to the command line switch
--tmpfs=, see systemd-nspawn(1) for details about the
specific options supported. This setting is privileged (see
above).
Inaccessible=
Masks the specified file or directory in the container, by
over-mounting it with an empty file node of the same type
with the most restrictive access mode. Takes a file system
path as argument. This option may be used multiple times to
mask multiple files or directories. This option is equivalent
to the command line switch --inaccessible=, see
systemd-nspawn(1) for details about the specific options
supported. This setting is privileged (see above).
Overlay=, OverlayReadOnly=
Adds an overlay mount point. Takes a colon-separated list of
paths. This option may be used multiple times to configure
multiple overlay mounts. This option is equivalent to the
command line switches --overlay= and --overlay-ro=, see
systemd-nspawn(1) for details about the specific options
supported. This setting is privileged (see above).
PrivateUsersOwnership=
Configures whether the ownership of the files and directories
in the container tree shall be adjusted to the UID/GID range
used, if necessary and user namespacing is enabled. This is
equivalent to the --private-users-ownership= command line
switch. This option is privileged (see above).
Параметры раздела Сеть (Network section options)
Settings files may include a [Network] section, which carries
various parameters configuring the network connectivity of the
container:
Private=
Takes a boolean argument, which defaults to off. If enabled,
the container will run in its own network namespace and not
share network interfaces and configuration with the host.
This setting corresponds to the --private-network command
line switch.
VirtualEthernet=
Takes a boolean argument. Configures whether to create a
virtual Ethernet connection ("veth") between host and the
container. This setting implies Private=yes. This setting
corresponds to the --network-veth command line switch. This
option is privileged (see above). This option is the default
if the systemd-nspawn@.service template unit file is used.
VirtualEthernetExtra=
Takes a colon-separated pair of interface names. Configures
an additional virtual Ethernet connection ("veth") between
host and the container. The first specified name is the
interface name on the host, the second the interface name in
the container. The latter may be omitted in which case it is
set to the same name as the host side interface. This setting
implies Private=yes. This setting corresponds to the
--network-veth-extra= command line switch, and maybe be used
multiple times. It is independent of VirtualEthernet=. Note
that this option is unrelated to the Bridge= setting below,
and thus any connections created this way are not
automatically added to any bridge device on the host side.
This option is privileged (see above).
Interface=
Takes a space-separated list of interfaces to add to the
container. This option corresponds to the
--network-interface= command line switch and implies
Private=yes. This option is privileged (see above).
MACVLAN=, IPVLAN=
Takes a space-separated list of interfaces to add MACLVAN or
IPVLAN interfaces to, which are then added to the container.
These options correspond to the --network-macvlan= and
--network-ipvlan= command line switches and imply
Private=yes. These options are privileged (see above).
Bridge=
Takes an interface name. This setting implies
VirtualEthernet=yes and Private=yes and has the effect that
the host side of the created virtual Ethernet link is
connected to the specified bridge interface. This option
corresponds to the --network-bridge= command line switch.
This option is privileged (see above).
Zone=
Takes a network zone name. This setting implies
VirtualEthernet=yes and Private=yes and has the effect that
the host side of the created virtual Ethernet link is
connected to an automatically managed bridge interface named
after the passed argument, prefixed with "vz-". This option
corresponds to the --network-zone= command line switch. This
option is privileged (see above).
Port=
Exposes a TCP or UDP port of the container on the host. This
option corresponds to the --port= command line switch, see
systemd-nspawn(1) for the precise syntax of the argument this
option takes. This option is privileged (see above).
Смотри также (See also)
systemd(1), systemd-nspawn(1), systemd.directives(7)
