описание формата для таблиц smtpd (format description for smtpd tables)
Имя (Name)
table — format description for smtpd tables
Описание (Description)
This manual page documents the file format for the various tables
used in the smtpd(8) mail daemon.
The format described here applies to tables as defined in
smtpd.conf(5).
TABLE TYPES
There are two types of tables: lists and mappings. A list consists
of a series of values, while a mapping consists of a series of keys
and their associated values. The following illustrates how to
declare them as static tables:
table mylist { value1, value2, value3 }
table mymapping { key1 = value1, key2 = value2, key3 = value3 }
When using a 'file' table, a list will be written with each value
on a line by itself. Comments can be put anywhere in the file
using a hash mark ('#'), and extend to the end of the current line.
value1
value2
value3
A mapping will be written with each key and value on a line,
whitespaces separating both columns:
key1 value1
key2 value2
key3 value3
A file table can be converted to a Berkeley database using the
makemap(8) utility with no syntax change.
Tables using a 'file' or Berkeley DB backend will be referenced as
follows:
table name file:/path/to/file
table name db:/path/to/file.db
Aliasing tables
Aliasing tables are mappings that associate a recipient to one or
many destinations. They can be used in two contexts: primary
domain aliases and virtual domain mapping.
action name method alias <table>
action name method virtual <table>
In a primary domain context, the key is the user part of the
recipient address, whilst the value is one or many recipients as
described in aliases(5):
user1 otheruser
user2 otheruser1,otheruser2
user3 otheruser@example.com
In a virtual domain context, the key is either a user part, a full
email address or a catch-all, following selection rules described
in smtpd.conf(5), and the value is one or many recipients as
described in aliases(5):
user1 otheruser
user2@example.org otheruser1,otheruser2
@example.org otheruser@example.com
@ catchall@example.com
The following directive shares the same table format, but with a
different meaning. Here, the user is allowed to send mail from the
listed addresses:
listen on interface auth [...] senders <table>
Domain tables
Domain tables are simple lists of domains or hosts.
match for domain <table> action name
match helo <table> [...] action name
In that context, the list of domains will be matched against the
recipient domain or against the HELO name advertised by the sending
host, respectively. For 'static', 'file' and dbopen(3) backends, a
wildcard may be used so the domain table may contain:
example.org
*.example.org
Credentials tables
Credentials tables are mappings of credentials. They can be used
in two contexts:
listen on interface tls [...] auth <table>
action name relay host relay-url auth <table>
In a listener context, the credentials are a mapping of username
and encrypted passwords:
user1 $2b$10$hIJ4QfMcp.90nJwKqGbKM.MybArjHOTpEtoTV.DgLYAiThuoYmTSe
user2 $2b$10$bwSmUOBGcZGamIfRuXGTvuTo3VLbPG9k5yeKNMBtULBhksV5KdGsK
The passwords are to be encrypted using the smtpctl(8) encrypt
subcommand.
In a relay context, the credentials are a mapping of labels and
username:password pairs:
label1 user:password
The label must be unique and is used as a selector for the proper
credentials when multiple credentials are valid for a single
destination. The password is not encrypted as it must be provided
to the remote host.
Netaddr tables
Netaddr tables are lists of IPv4 and IPv6 network addresses. They
can only be used in the following context:
match from src <table> action name
When used as a "from source", the address of a client is compared
to the list of addresses in the table until a match is found.
A netaddr table can contain exact addresses or netmasks, and looks
as follow:
192.168.1.1
::1
ipv6:::1
192.168.1.0/24
Userinfo tables
Userinfo tables are used in rule context to specify an alternate
userbase, mapping virtual users to local system users by UID, GID
and home directory.
action name method userbase <table>
A userinfo table looks as follows:
joe 1000:100:/home/virtual/joe
jack 1000:100:/home/virtual/jack
In this example, both joe and jack are virtual users mapped to the
local system user with UID 1000 and GID 100, but different home
directories. These directories may contain a forward(5) file.
This can be used in conjunction with an alias table that maps an
email address or the domain part to the desired virtual username.
For example:
joe@example.org joe
jack@example.com jack
Source tables
Source tables are lists of IPv4 and IPv6 addresses. They can only
be used in the following context:
action name relay src <table>
Successive queries to the source table will return the elements one
by one.
A source table looks as follow:
192.168.1.2
192.168.1.3
::1
::2
ipv6:::3
ipv6:::4
Mailaddr tables
Mailaddr tables are lists of email addresses. They can be used in
the following contexts:
match mail-from <table> action name
match rcpt-to <table> action name
A mailaddr entry is used to match an email address against a
username, a domain or a full email address. A "*" wildcard may be
used in part of the domain name.
A mailaddr table looks as follow:
user
@domain
user@domain
user@*.domain
Addrname tables
Addrname tables are used to map IP addresses to hostnames. They
can be used in both listen context and relay context:
listen on interface hostnames <table>
action name relay helo-src <table>
In listen context, the table is used to look up the server name to
advertise depending on the local address of the socket on which a
connection is accepted. In relay context, the table is used to
determine the hostname for the HELO sequence of the SMTP protocol,
depending on the local address used for the outgoing connection.
The format is a mapping from inet4 or inet6 addresses to hostnames:
::1 localhost
127.0.0.1 localhost
88.190.23.165 www.opensmtpd.org
Смотри также (See also)
smtpd.conf(5), makemap(8), smtpd(8)
