программное обеспечение RDMA через Ethernet (Software RDMA over Ethernet)
Имя (Name)
rxe - Software RDMA over Ethernet
Синопсис (Synopsis)
modprobe rdma_rxe
This is usually performed by a configuration utility (see rdma
link(8).)
Описание (Description)
The rdma_rxe kernel module provides a software implementation of
the RoCEv2 protocol. The RoCEv2 protocol is an RDMA transport
protocol that exists on top of UDP/IPv4 or UDP/IPv6. The
InfiniBand (IB) Base Transport Header (BTH) is encapsulated in
the UDP packet.
Once a RXE instance has been created, communicating via RXE is
the same as communicating via any OFED compatible Infiniband HCA,
albeit in some cases with addressing implications.
In particular, while the use of a GRH header is optional within
IB subnets, it is mandatory with RoCE. Verbs applications
written over IB verbs should work seamlessly, but they require
provisioning of GRH information when creating address vectors.
The library and driver are modified to provide for mapping from
GID to MAC addresses required by the hardware.
Файлы (Files)
/sys/class/infiniband/rxe[0,1,...]
Directory that holds RDMA device information. The format
is the same as other RDMA devices.
/sys/module/rdma_rxe_net/parameters/mtu
Write only file used to configure RoCE and Ethernet MTU
values.
/sys/module/rdma_rxe/parameters/max_ucontext
Read/Write file that sets a limit on the number of UCs
allowed per RXE device.
/sys/module/rdma_rxe/parameters/max_qp
Read/Write file that sets a limit on the number of QPs
allowed per RXE device.
/sys/module/rdma_rxe/parameters/max_qp_wr
Read/Write file that sets a limit on the number of WRs per
QP allowed per RXE device.
/sys/module/rdma_rxe/parameters/max_mr
Read/Write file that sets a limit on the number of MRs
allowed per RXE device.
/sys/module/rdma_rxe/parameters/max_fmr
Read/Write file that sets a limit on the number of FMRs
allowed per RXE device.
/sys/module/rdma_rxe/parameters/max_cq
Read/Write file that sets a limit on the number of CQs
allowed per RXE device.
/sys/module/rdma_rxe/parameters/max_log_cqe
Read/Write file that sets a limit on the log base 2 of the
number of CQEs per CQ allowed per RXE device.
/sys/module/rdma_rxe/parameters/max_inline_data
Read/Write file that sets a limit on the maximum amount of
inline data per WR allowed per RXE device.
The above configuration parameters only affect a new RXE
instance when it is created not afterwards.
/sys/module/rdma_rxe/parameters/crc_disable
Read/Write file that controls the disabling of ICRC
computation. Set to a nonzero value for TRUE. Zero for
FALSE.
/sys/module/rdma_rxe/parameters/fast_comp|req|resp|arb
Read/Write file that enables calling kernel tasklets as
subroutines to reduce latency.
/sys/module/rdma_rxe/parameters/nsec_per_packet|kbyte
Read/Write file that controls static rate pacing for
output packets. If set to nonzero values the minimum delay
to the next packet is set to nsec_per_kbyte *
sizeof(current packet in KBytes) or nsec_per_packet which
ever is less.
/sys/module/rdma_rxe/parameters/max_packet_per_ack
Read/Write file that controls the issuing of acks by the
responder during a long message. If set additional acks
will be generated every max_pkt_per_ack packets.
/sys/module/rdma_rxe/parameters/max_skb_per_qp
Read/Write file that controls the number of skbs (packets)
that a requester can queue for sending internally.
/sys/module/rdma_rxe/parameters/max_req_comp_gap
Read/Write file that controls the maximum gap between the
PSN of request packets send and ack packets received.
/sys/module/rdma_rxe/parameters/default_mtu
Read/Write file that controls the default mtu used for UD
packets.
Смотри также (See also)
rdma(8), verbs(7),
