конфигурация сетевого устройства (network device configuration)
Имя (Name)
ip-link - network device configuration
Синопсис (Synopsis)
ip link { COMMAND | help }
ip link add [ link DEVICE ] [ name ] NAME
[ txqueuelen PACKETS ]
[ address LLADDR ] [ broadcast LLADDR ]
[ mtu MTU ] [ index IDX ]
[ numtxqueues QUEUE_COUNT ] [ numrxqueues QUEUE_COUNT ]
[ gso_max_size BYTES ] [ gso_max_segs SEGMENTS ]
type TYPE [ ARGS ]
ip link delete { DEVICE | group GROUP } type TYPE [ ARGS ]
ip link set { DEVICE | group GROUP }
[ { up | down } ]
[ type ETYPE TYPE_ARGS ]
[ arp { on | off } ]
[ dynamic { on | off } ]
[ multicast { on | off } ]
[ allmulticast { on | off } ]
[ promisc { on | off } ]
[ protodown { on | off } ]
[ protodown_reason PREASON { on | off } ]
[ trailers { on | off } ]
[ txqueuelen PACKETS ]
[ name NEWNAME ]
[ address LLADDR ]
[ broadcast LLADDR ]
[ mtu MTU ]
[ netns { PID | NETNSNAME } ]
[ link-netnsid ID ]
[ alias NAME ]
[ vf NUM [ mac LLADDR ]
[ VFVLAN-LIST ]
[ rate TXRATE ]
[ max_tx_rate TXRATE ]
[ min_tx_rate TXRATE ]
[ spoofchk { on | off } ]
[ query_rss { on | off } ]
[ state { auto | enable | disable } ]
[ trust { on | off } ]
[ node_guid eui64 ]
[ port_guid eui64 ] ]
[ { xdp | xdpgeneric | xdpdrv | xdpoffload } { off |
object FILE [ section NAME ] [ verbose ] |
pinned FILE } ]
[ master DEVICE ]
[ nomaster ]
[ vrf NAME ]
[ addrgenmode { eui64 | none | stable_secret | random } ]
[ macaddr [ MACADDR ]
[ { flush | add | del } MACADDR ]
[ set MACADDR ] ]
ip link show [ DEVICE | group GROUP ] [ up ] [ master
DEVICE ] [ type ETYPE ] [ vrf NAME ]
ip link xstats type TYPE [ ARGS ]
ip link afstats [ dev DEVICE ]
ip link help [ TYPE ]
TYPE := [ bridge | bond | can | dummy | hsr | ifb |
ipoib | macvlan | macvtap | vcan | vxcan | veth
| vlan | vxlan | ip6tnl | ipip | sit | gre |
gretap | erspan | ip6gre | ip6gretap |
ip6erspan | vti | nlmon | ipvlan | ipvtap |
lowpan | geneve | bareudp | vrf | macsec |
netdevsim | rmnet | xfrm ]
ETYPE := [ TYPE | bridge_slave | bond_slave ]
VFVLAN-LIST := [ VFVLAN-LIST ] VFVLAN
VFVLAN := [ vlan VLANID [ qos VLAN-QOS ] [ proto VLAN-
PROTO ] ]
ip link property add [ altname NAME .. ]
ip link property del [ altname NAME .. ]
Описание (Description)
ip link add - add virtual link
link DEVICE
specifies the physical device to act operate on.
NAME specifies the name of the new virtual device.
TYPE specifies the type of the new device.
Link types:
bridge - Ethernet Bridge device
bond - Bonding device
dummy - Dummy network interface
hsr - High-availability Seamless Redundancy device
ifb - Intermediate Functional Block device
ipoib - IP over Infiniband device
macvlan - Virtual interface base on link layer
address (MAC)
macvtap - Virtual interface based on link layer
address (MAC) and TAP.
vcan - Virtual Controller Area Network interface
vxcan - Virtual Controller Area Network tunnel
interface
veth - Virtual ethernet interface
vlan - 802.1q tagged virtual LAN interface
vxlan - Virtual eXtended LAN
ip6tnl - Virtual tunnel interface IPv4|IPv6 over
IPv6
ipip - Virtual tunnel interface IPv4 over IPv4
sit - Virtual tunnel interface IPv6 over IPv4
gre - Virtual tunnel interface GRE over IPv4
gretap - Virtual L2 tunnel interface GRE over IPv4
erspan - Encapsulated Remote SPAN over GRE and
IPv4
ip6gre - Virtual tunnel interface GRE over IPv6
ip6gretap - Virtual L2 tunnel interface GRE over
IPv6
ip6erspan - Encapsulated Remote SPAN over GRE and
IPv6
vti - Virtual tunnel interface
nlmon - Netlink monitoring device
ipvlan - Interface for L3 (IPv6/IPv4) based VLANs
ipvtap - Interface for L3 (IPv6/IPv4) based VLANs
and TAP
lowpan - Interface for 6LoWPAN (IPv6) over IEEE
802.15.4 / Bluetooth
geneve - GEneric NEtwork Virtualization
Encapsulation
bareudp - Bare UDP L3 encapsulation support
macsec - Interface for IEEE 802.1AE MAC Security
(MACsec)
vrf - Interface for L3 VRF domains
netdevsim - Interface for netdev API tests
rmnet - Qualcomm rmnet device
xfrm - Virtual xfrm interface
numtxqueues QUEUE_COUNT
specifies the number of transmit queues for new device.
numrxqueues QUEUE_COUNT
specifies the number of receive queues for new device.
gso_max_size BYTES
specifies the recommended maximum size of a Generic
Segment Offload packet the new device should accept.
gso_max_segs SEGMENTS
specifies the recommended maximum number of a Generic
Segment Offload segments the new device should accept.
index IDX
specifies the desired index of the new virtual device. The
link creation fails, if the index is busy.
VLAN Type Support
For a link of type VLAN the following additional arguments
are supported:
ip link add link DEVICE name NAME type vlan [ protocol
VLAN_PROTO ] id VLANID [ reorder_hdr { on | off } ] [ gvrp
{ on | off } ] [ mvrp { on | off } ] [ loose_binding { on
| off } ] [ bridge_binding { on | off } ] [ ingress-qos-
map QOS-MAP ] [ egress-qos-map QOS-MAP ]
protocol VLAN_PROTO - either 802.1Q or 802.1ad.
id VLANID - specifies the VLAN Identifier to use.
Note that numbers with a leading " 0 " or " 0x "
are interpreted as octal or hexadecimal,
respectively.
reorder_hdr { on | off } - specifies whether
ethernet headers are reordered or not (default is
on).
If reorder_hdr is on then VLAN header will be
not inserted immediately but only before
passing to the physical device (if this device
does not support VLAN offloading), the similar
on the RX direction - by default the packet
will be untagged before being received by VLAN
device. Reordering allows to accelerate
tagging on egress and to hide VLAN header on
ingress so the packet looks like regular
Ethernet packet, at the same time it might be
confusing for packet capture as the VLAN
header does not exist within the packet.
VLAN offloading can be checked by ethtool(8):
ethtool -k <phy_dev> | grep tx-vlan-
offload
where <phy_dev> is the physical device to
which VLAN device is bound.
gvrp { on | off } - specifies whether this VLAN
should be registered using GARP VLAN
Registration Protocol.
mvrp { on | off } - specifies whether this VLAN
should be registered using Multiple VLAN
Registration Protocol.
loose_binding { on | off } - specifies whether the
VLAN device state is bound to the physical device
state.
bridge_binding { on | off } - specifies whether
the VLAN device link state tracks the state of
bridge ports that are members of the VLAN.
ingress-qos-map QOS-MAP - defines a mapping of
VLAN header prio field to the Linux internal
packet priority on incoming frames. The format is
FROM:TO with multiple mappings separated by
spaces.
egress-qos-map QOS-MAP - defines a mapping of
Linux internal packet priority to VLAN header prio
field but for outgoing frames. The format is the
same as for ingress-qos-map.
Linux packet priority can be set by
iptables(8):
iptables -t mangle -A POSTROUTING [...] -j
CLASSIFY --set-class 0:4
and this "4" priority can be used in the
egress qos mapping to set VLAN prio "5":
ip link set veth0.10 type vlan egress 4:5
VXLAN Type Support
For a link of type VXLAN the following additional
arguments are supported:
ip link add DEVICE type vxlan id VNI [ dev PHYS_DEV ] [ {
group | remote } IPADDR ] [ local { IPADDR | any } ] [ ttl
TTL ] [ tos TOS ] [ df DF ] [ flowlabel FLOWLABEL ] [
dstport PORT ] [ srcport MIN MAX ] [ [no]learning ] [
[no]proxy ] [ [no]rsc ] [ [no]l2miss ] [ [no]l3miss ] [
[no]udpcsum ] [ [no]udp6zerocsumtx ] [ [no]udp6zerocsumrx
] [ ageing SECONDS ] [ maxaddress NUMBER ] [ [no]external
] [ gbp ] [ gpe ]
id VNI - specifies the VXLAN Network Identifier
(or VXLAN Segment Identifier) to use.
dev PHYS_DEV - specifies the physical device to
use for tunnel endpoint communication.
group IPADDR - specifies the multicast IP address
to join. This parameter cannot be specified with
the remote parameter.
remote IPADDR - specifies the unicast destination
IP address to use in outgoing packets when the
destination link layer address is not known in the
VXLAN device forwarding database. This parameter
cannot be specified with the group parameter.
local IPADDR - specifies the source IP address to
use in outgoing packets.
ttl TTL - specifies the TTL value to use in
outgoing packets.
tos TOS - specifies the TOS value to use in
outgoing packets.
df DF - specifies the usage of the Don't Fragment
flag (DF) bit in outgoing packets with IPv4
headers. The value inherit causes the bit to be
copied from the original IP header. The values
unset and set cause the bit to be always unset or
always set, respectively. By default, the bit is
not set.
flowlabel FLOWLABEL - specifies the flow label to
use in outgoing packets.
dstport PORT - specifies the UDP destination port
to communicate to the remote
VXLAN tunnel endpoint.
srcport MIN MAX - specifies the range of port
numbers to use as UDP source ports to communicate
to the remote VXLAN tunnel endpoint.
[no]learning - specifies if unknown source link
layer addresses and IP addresses are entered into
the VXLAN device forwarding database.
[no]rsc - specifies if route short circuit is
turned on.
[no]proxy - specifies ARP proxy is turned on.
[no]l2miss - specifies if netlink LLADDR miss
notifications are generated.
[no]l3miss - specifies if netlink IP ADDR miss
notifications are generated.
[no]udpcsum - specifies if UDP checksum is
calculated for transmitted packets over IPv4.
[no]udp6zerocsumtx - skip UDP checksum calculation
for transmitted packets over IPv6.
[no]udp6zerocsumrx - allow incoming UDP packets
over IPv6 with zero checksum field.
ageing SECONDS - specifies the lifetime in seconds
of FDB entries learnt by the kernel.
maxaddress NUMBER - specifies the maximum number
of FDB entries.
[no]external - specifies whether an external
control plane (e.g. ip route encap) or the
internal FDB should be used.
gbp - enables the Group Policy extension (VXLAN-
GBP).
Allows to transport group policy context
across VXLAN network peers. If enabled,
includes the mark of a packet in the VXLAN
header for outgoing packets and fills the
packet mark based on the information found in
the VXLAN header for incoming packets.
Format of upper 16 bits of packet mark
(flags);
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
|-|-|-|-|-|-|-|-|-|D|-|-|A|-|-|-|
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
D := Don't Learn bit. When set, this bit
indicates that the egress VTEP MUST NOT
learn the source address of the encapsulated
frame.
A := Indicates that the group policy has
already been applied to this packet.
Policies MUST NOT be applied by devices when
the A bit is set.
Format of lower 16 bits of packet mark (policy
ID):
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Group Policy ID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Example:
iptables -A OUTPUT [...] -j MARK --set-mark
0x800FF
gpe - enables the Generic Protocol extension
(VXLAN-GPE). Currently, this is only supported
together with the external keyword.
VETH, VXCAN Type Support
For a link of types VETH/VXCAN the following additional
arguments are supported:
ip link add DEVICE type { veth | vxcan } [ peer name NAME
]
peer name NAME - specifies the virtual pair device
name of the VETH/VXCAN tunnel.
IPIP, SIT Type Support
For a link of type IPIPorSIT the following additional
arguments are supported:
ip link add DEVICE type { ipip | sit } remote ADDR local
ADDR [ encap { fou | gue | none } ] [ encap-sport { PORT |
auto } ] [ encap-dport PORT ] [ [no]encap-csum ] [
[no]encap-remcsum ] [ mode { ip6ip | ipip | mplsip | any
} ] [ external ]
remote ADDR - specifies the remote address of the
tunnel.
local ADDR - specifies the fixed local address for
tunneled packets. It must be an address on
another interface on this host.
encap { fou | gue | none } - specifies type of
secondary UDP encapsulation. "fou" indicates Foo-
Over-UDP, "gue" indicates Generic UDP
Encapsulation.
encap-sport { PORT | auto } - specifies the source
port in UDP encapsulation. PORT indicates the
port by number, "auto" indicates that the port
number should be chosen automatically (the kernel
picks a flow based on the flow hash of the
encapsulated packet).
[no]encap-csum - specifies if UDP checksums are
enabled in the secondary encapsulation.
[no]encap-remcsum - specifies if Remote Checksum
Offload is enabled. This is only applicable for
Generic UDP Encapsulation.
mode { ip6ip | ipip | mplsip | any } - specifies
mode in which device should run. "ip6ip" indicates
IPv6-Over-IPv4, "ipip" indicates "IPv4-Over-IPv4",
"mplsip" indicates MPLS-Over-IPv4, "any" indicates
IPv6, IPv4 or MPLS Over IPv4. Supported for SIT
where the default is "ip6ip" and IPIP where the
default is "ipip". IPv6-Over-IPv4 is not
supported for IPIP.
external - make this tunnel externally controlled
(e.g. ip route encap).
GRE Type Support
For a link of type GRE or GRETAP the following additional
arguments are supported:
ip link add DEVICE type { gre | gretap } remote ADDR
local ADDR [ [no][i|o]seq ] [ [i|o]key KEY | no[i|o]key ]
[ [no][i|o]csum ] [ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ]
[ [no]ignore-df ] [ dev PHYS_DEV ] [ encap { fou | gue |
none } ] [ encap-sport { PORT | auto } ] [ encap-dport
PORT ] [ [no]encap-csum ] [ [no]encap-remcsum ] [ external
]
remote ADDR - specifies the remote address of the
tunnel.
local ADDR - specifies the fixed local address for
tunneled packets. It must be an address on
another interface on this host.
[no][i|o]seq - serialize packets. The oseq flag
enables sequencing of outgoing packets. The iseq
flag requires that all input packets are
serialized.
[i|o]key KEY | no[i|o]key - use keyed GRE with key
KEY. KEY is either a number or an IPv4 address-
like dotted quad. The key parameter specifies the
same key to use in both directions. The ikey and
okey parameters specify different keys for input
and output.
[no][i|o]csum - generate/require checksums for
tunneled packets. The ocsum flag calculates
checksums for outgoing packets. The icsum flag
requires that all input packets have the correct
checksum. The csum flag is equivalent to the
combination icsum ocsum .
ttl TTL - specifies the TTL value to use in
outgoing packets.
tos TOS - specifies the TOS value to use in
outgoing packets.
[no]pmtudisc - enables/disables Path MTU Discovery
on this tunnel. It is enabled by default. Note
that a fixed ttl is incompatible with this option:
tunneling with a fixed ttl always makes pmtu
discovery.
[no]ignore-df - enables/disables IPv4 DF
suppression on this tunnel. Normally datagrams
that exceed the MTU will be fragmented; the
presence of the DF flag inhibits this, resulting
instead in an ICMP Unreachable (Fragmentation
Required) message. Enabling this attribute causes
the DF flag to be ignored.
dev PHYS_DEV - specifies the physical device to
use for tunnel endpoint communication.
encap { fou | gue | none } - specifies type of
secondary UDP encapsulation. "fou" indicates Foo-
Over-UDP, "gue" indicates Generic UDP
Encapsulation.
encap-sport { PORT | auto } - specifies the source
port in UDP encapsulation. PORT indicates the
port by number, "auto" indicates that the port
number should be chosen automatically (the kernel
picks a flow based on the flow hash of the
encapsulated packet).
[no]encap-csum - specifies if UDP checksums are
enabled in the secondary encapsulation.
[no]encap-remcsum - specifies if Remote Checksum
Offload is enabled. This is only applicable for
Generic UDP Encapsulation.
external - make this tunnel externally controlled
(e.g. ip route encap).
IP6GRE/IP6GRETAP Type Support
For a link of type IP6GRE/IP6GRETAP the following
additional arguments are supported:
ip link add DEVICE type { ip6gre | ip6gretap } remote ADDR
local ADDR [ [no][i|o]seq ] [ [i|o]key KEY | no[i|o]key ]
[ [no][i|o]csum ] [ hoplimit TTL ] [ encaplimit ELIM ] [
tclass TCLASS ] [ flowlabel FLOWLABEL ] [ dscp inherit ] [
[no]allow-localremote ] [ dev PHYS_DEV ] [ external ]
remote ADDR - specifies the remote IPv6 address of
the tunnel.
local ADDR - specifies the fixed local IPv6
address for tunneled packets. It must be an
address on another interface on this host.
[no][i|o]seq - serialize packets. The oseq flag
enables sequencing of outgoing packets. The iseq
flag requires that all input packets are
serialized.
[i|o]key KEY | no[i|o]key - use keyed GRE with key
KEY. KEY is either a number or an IPv4 address-
like dotted quad. The key parameter specifies the
same key to use in both directions. The ikey and
okey parameters specify different keys for input
and output.
[no][i|o]csum - generate/require checksums for
tunneled packets. The ocsum flag calculates
checksums for outgoing packets. The icsum flag
requires that all input packets have the correct
checksum. The csum flag is equivalent to the
combination icsum ocsum.
hoplimit TTL - specifies Hop Limit value to use in
outgoing packets.
encaplimit ELIM - specifies a fixed encapsulation
limit. Default is 4.
flowlabel FLOWLABEL - specifies a fixed flowlabel.
[no]allow-localremote - specifies whether to allow
remote endpoint to have an address configured on
local host.
tclass TCLASS - specifies the traffic class field
on tunneled packets, which can be specified as
either a two-digit hex value (e.g. c0) or a
predefined string (e.g. internet). The value
inherit causes the field to be copied from the
original IP header. The values inherit/STRING or
inherit/00..ff will set the field to STRING or
00..ff when tunneling non-IP packets. The default
value is 00.
external - make this tunnel externally controlled
(or not, which is the default). In the kernel,
this is referred to as collect metadata mode.
This flag is mutually exclusive with the remote,
local, seq, key, csum, hoplimit, encaplimit,
flowlabel and tclass options.
IPoIB Type Support
For a link of type IPoIB the following additional
arguments are supported:
ip link add DEVICE name NAME type ipoib [ pkey PKEY ] [
mode MODE ]
pkey PKEY - specifies the IB P-Key to use.
mode MODE - specifies the mode (datagram or
connected) to use.
ERSPAN Type Support
For a link of type ERSPAN/IP6ERSPAN the following
additional arguments are supported:
ip link add DEVICE type { erspan | ip6erspan } remote ADDR
local ADDR seq key KEY erspan_ver version [ erspan IDX ] [
erspan_dir { ingress | egress } ] [ erspan_hwid hwid ] [
[no]allow-localremote ] [ external ]
remote ADDR - specifies the remote address of the
tunnel.
local ADDR - specifies the fixed local address for
tunneled packets. It must be an address on
another interface on this host.
erspan_ver version - specifies the ERSPAN version
number. version indicates the ERSPAN version to
be created: 0 for version 0 type I, 1 for version
1 (type II) or 2 for version 2 (type III).
erspan IDX - specifies the ERSPAN v1 index field.
IDX indicates a 20 bit index/port number
associated with the ERSPAN traffic's source port
and direction.
erspan_dir { ingress | egress } - specifies the
ERSPAN v2 mirrored traffic's direction.
erspan_hwid hwid - an unique identifier of an
ERSPAN v2 engine within a system. hwid is a 6-bit
value for users to configure.
[no]allow-localremote - specifies whether to allow
remote endpoint to have an address configured on
local host.
external - make this tunnel externally controlled
(or not, which is the default). In the kernel,
this is referred to as collect metadata mode.
This flag is mutually exclusive with the remote,
local, erspan_ver, erspan, erspan_dir and
erspan_hwid options.
GENEVE Type Support
For a link of type GENEVE the following additional
arguments are supported:
ip link add DEVICE type geneve id VNI remote IPADDR [ ttl
TTL ] [ tos TOS ] [ df DF ] [ flowlabel FLOWLABEL ] [
dstport PORT ] [ [no]external ] [ [no]udpcsum ] [
[no]udp6zerocsumtx ] [ [no]udp6zerocsumrx ]
id VNI - specifies the Virtual Network Identifier
to use.
remote IPADDR - specifies the unicast destination
IP address to use in outgoing packets.
ttl TTL - specifies the TTL value to use in
outgoing packets. "0" or "auto" means use whatever
default value, "inherit" means inherit the inner
protocol's ttl. Default option is "0".
tos TOS - specifies the TOS value to use in
outgoing packets.
df DF - specifies the usage of the Don't Fragment
flag (DF) bit in outgoing packets with IPv4
headers. The value inherit causes the bit to be
copied from the original IP header. The values
unset and set cause the bit to be always unset or
always set, respectively. By default, the bit is
not set.
flowlabel FLOWLABEL - specifies the flow label to
use in outgoing packets.
dstport PORT - select a destination port other
than the default of 6081.
[no]external - make this tunnel externally
controlled (or not, which is the default). This
flag is mutually exclusive with the id, remote,
ttl, tos and flowlabel options.
[no]udpcsum - specifies if UDP checksum is
calculated for transmitted packets over IPv4.
[no]udp6zerocsumtx - skip UDP checksum calculation
for transmitted packets over IPv6.
[no]udp6zerocsumrx - allow incoming UDP packets
over IPv6 with zero checksum field.
Bareudp Type Support
For a link of type Bareudp the following additional
arguments are supported:
ip link add DEVICE type bareudp dstport PORT ethertype
ETHERTYPE [ srcportmin SRCPORTMIN ] [ [no]multiproto ]
dstport PORT - specifies the destination port for
the UDP tunnel.
ethertype ETHERTYPE - specifies the ethertype of
the L3 protocol being tunnelled.
srcportmin SRCPORTMIN - selects the lowest value
of the UDP tunnel source port range.
[no]multiproto - activates support for protocols
similar to the one specified by ethertype. When
ETHERTYPE is "mpls_uc" (that is, unicast MPLS),
this allows the tunnel to also handle multicast
MPLS. When ETHERTYPE is "ipv4", this allows the
tunnel to also handle IPv6. This option is
disabled by default.
MACVLAN and MACVTAP Type Support
For a link of type MACVLAN or MACVTAP the following
additional arguments are supported:
ip link add link DEVICE name NAME type { macvlan | macvtap
} mode { private | vepa | bridge | passthru [ nopromisc ]
| source }
type { macvlan | macvtap } - specifies the link
type to use. macvlan creates just a virtual
interface, while macvtap in addition creates a
character device /dev/tapX to be used just like a
tuntap device.
mode private - Do not allow communication between
macvlan instances on the same physical interface,
even if the external switch supports hairpin mode.
mode vepa - Virtual Ethernet Port Aggregator mode.
Data from one macvlan instance to the other on the
same physical interface is transmitted over the
physical interface. Either the attached switch
needs to support hairpin mode, or there must be a
TCP/IP router forwarding the packets in order to
allow communication. This is the default mode.
mode bridge - In bridge mode, all endpoints are
directly connected to each other, communication is
not redirected through the physical interface's
peer.
mode passthru [ nopromisc ] - This mode gives more
power to a single endpoint, usually in macvtap
mode. It is not allowed for more than one endpoint
on the same physical interface. All traffic will
be forwarded to this endpoint, allowing virtio
guests to change MAC address or set promiscuous
mode in order to bridge the interface or create
vlan interfaces on top of it. By default, this
mode forces the underlying interface into
promiscuous mode. Passing the nopromisc flag
prevents this, so the promisc flag may be
controlled using standard tools.
mode source - allows one to set a list of allowed
mac address, which is used to match against source
mac address from received frames on underlying
interface. This allows creating mac based VLAN
associations, instead of standard port or tag
based. The feature is useful to deploy 802.1x mac
based behavior, where drivers of underlying
interfaces doesn't allows that.
High-availability Seamless Redundancy (HSR) Support
For a link of type HSR the following additional arguments
are supported:
ip link add link DEVICE name NAME type hsr slave1
SLAVE1-IF slave2 SLAVE2-IF [ supervision ADDR-BYTE ] [
version { 0 | 1 } [ proto { 0 | 1 } ]
type hsr - specifies the link type to use, here
HSR.
slave1 SLAVE1-IF - Specifies the physical device
used for the first of the two ring ports.
slave2 SLAVE2-IF - Specifies the physical device
used for the second of the two ring ports.
supervision ADDR-BYTE - The last byte of the
multicast address used for HSR supervision frames.
Default option is "0", possible values 0-255.
version { 0 | 1 } - Selects the protocol version
of the interface. Default option is "0", which
corresponds to the 2010 version of the HSR
standard. Option "1" activates the 2012 version.
proto { 0 | 1 } - Selects the protocol at the
interface. Default option is "0", which
corresponds to the HSR standard. Option "1"
activates the Parallel Redundancy Protocol (PRP).
BRIDGE Type Support
For a link of type BRIDGE the following additional
arguments are supported:
ip link add DEVICE type bridge [ ageing_time AGEING_TIME ]
[ group_fwd_mask MASK ] [ group_address ADDRESS ] [
forward_delay FORWARD_DELAY ] [ hello_time HELLO_TIME ] [
max_age MAX_AGE ] [ stp_state STP_STATE ] [ priority
PRIORITY ] [ vlan_filtering VLAN_FILTERING ] [
vlan_protocol VLAN_PROTOCOL ] [ vlan_default_pvid
VLAN_DEFAULT_PVID ] [ vlan_stats_enabled
VLAN_STATS_ENABLED ] [ vlan_stats_per_port
VLAN_STATS_PER_PORT ] [ mcast_snooping MULTICAST_SNOOPING
] [ mcast_router MULTICAST_ROUTER ] [
mcast_query_use_ifaddr MCAST_QUERY_USE_IFADDR ] [
mcast_querier MULTICAST_QUERIER ] [ mcast_hash_elasticity
HASH_ELASTICITY ] [ mcast_hash_max HASH_MAX ] [
mcast_last_member_count LAST_MEMBER_COUNT ] [
mcast_startup_query_count STARTUP_QUERY_COUNT ] [
mcast_last_member_interval LAST_MEMBER_INTERVAL ] [
mcast_membership_interval MEMBERSHIP_INTERVAL ] [
mcast_querier_interval QUERIER_INTERVAL ] [
mcast_query_interval QUERY_INTERVAL ] [
mcast_query_response_interval QUERY_RESPONSE_INTERVAL ] [
mcast_startup_query_interval STARTUP_QUERY_INTERVAL ] [
mcast_stats_enabled MCAST_STATS_ENABLED ] [
mcast_igmp_version IGMP_VERSION ] [ mcast_mld_version
MLD_VERSION ] [ nf_call_iptables NF_CALL_IPTABLES ] [
nf_call_ip6tables NF_CALL_IP6TABLES ] [ nf_call_arptables
NF_CALL_ARPTABLES ]
ageing_time AGEING_TIME - configure the bridge's
FDB entries ageing time, ie the number of seconds
a MAC address will be kept in the FDB after a
packet has been received from that address. after
this time has passed, entries are cleaned up.
group_fwd_mask MASK - set the group forward mask.
This is the bitmask that is applied to decide
whether to forward incoming frames destined to
link-local addresses, ie addresses of the form
01:80:C2:00:00:0X (defaults to 0, ie the bridge
does not forward any link-local frames).
group_address ADDRESS - set the MAC address of the
multicast group this bridge uses for STP. The
address must be a link-local address in standard
Ethernet MAC address format, ie an address of the
form 01:80:C2:00:00:0X, with X
in [0, 4..f].
forward_delay FORWARD_DELAY - set the forwarding
delay in seconds, ie the time spent in LISTENING
state (before moving to LEARNING) and in LEARNING
state (before moving to FORWARDING). Only relevant
if STP is enabled. Valid values are between 2 and
30.
hello_time HELLO_TIME - set the time in seconds
between hello packets sent by the bridge, when it
is a root bridge or a designated bridges. Only
relevant if STP is enabled. Valid values are
between 1 and 10.
max_age MAX_AGE - set the hello packet timeout, ie
the time in seconds until another bridge in the
spanning tree is assumed to be dead, after
reception of its last hello message. Only relevant
if STP is enabled. Valid values are between 6 and
40.
stp_state STP_STATE - turn spanning tree protocol
on (STP_STATE > 0) or off (STP_STATE == 0). for
this bridge.
priority PRIORITY - set this bridge's spanning
tree priority, used during STP root bridge
election. PRIORITY is a 16bit unsigned integer.
vlan_filtering VLAN_FILTERING - turn VLAN
filtering on (VLAN_FILTERING > 0) or off
(VLAN_FILTERING == 0). When disabled, the bridge
will not consider the VLAN tag when handling
packets.
vlan_protocol { 802.1Q | 802.1ad } - set the
protocol used for VLAN filtering.
vlan_default_pvid VLAN_DEFAULT_PVID - set the
default PVID (native/untagged VLAN ID) for this
bridge.
vlan_stats_enabled VLAN_STATS_ENABLED - enable
(VLAN_STATS_ENABLED == 1) or disable
(VLAN_STATS_ENABLED == 0) per-VLAN stats
accounting.
vlan_stats_per_port VLAN_STATS_PER_PORT - enable
(VLAN_STATS_PER_PORT == 1) or disable
(VLAN_STATS_PER_PORT == 0) per-VLAN per-port stats
accounting. Can be changed only when there are no
port VLANs configured.
mcast_snooping MULTICAST_SNOOPING - turn multicast
snooping on (MULTICAST_SNOOPING > 0) or off
(MULTICAST_SNOOPING == 0).
mcast_router MULTICAST_ROUTER - set bridge's
multicast router if IGMP snooping is enabled.
MULTICAST_ROUTER is an integer value having the
following meaning:
0 - disabled.
1 - automatic (queried).
2 - permanently enabled.
mcast_query_use_ifaddr MCAST_QUERY_USE_IFADDR -
whether to use the bridge's own IP address as
source address for IGMP queries
(MCAST_QUERY_USE_IFADDR > 0) or the default of
0.0.0.0 (MCAST_QUERY_USE_IFADDR == 0).
mcast_querier MULTICAST_QUERIER - enable
(MULTICAST_QUERIER > 0) or disable
(MULTICAST_QUERIER == 0) IGMP querier, ie sending
of multicast queries by the bridge (default:
disabled).
mcast_querier_interval QUERIER_INTERVAL - interval
between queries sent by other routers. if no
queries are seen after this delay has passed, the
bridge will start to send its own queries (as if
mcast_querier was enabled).
mcast_hash_elasticity HASH_ELASTICITY - set
multicast database hash elasticity, ie the maximum
chain length in the multicast hash table (defaults
to 4).
mcast_hash_max HASH_MAX - set maximum size of
multicast hash table (defaults to 512, value must
be a power of 2).
mcast_last_member_count LAST_MEMBER_COUNT - set
multicast last member count, ie the number of
queries the bridge will send before stopping
forwarding a multicast group after a "leave"
message has been received (defaults to 2).
mcast_last_member_interval LAST_MEMBER_INTERVAL -
interval between queries to find remaining members
of a group, after a "leave" message is received.
mcast_startup_query_count STARTUP_QUERY_COUNT -
set the number of IGMP queries to send during
startup phase (defaults to 2).
mcast_startup_query_interval
STARTUP_QUERY_INTERVAL - interval between queries
in the startup phase.
mcast_query_interval QUERY_INTERVAL - interval
between queries sent by the bridge after the end
of the startup phase.
mcast_query_response_interval
QUERY_RESPONSE_INTERVAL - set the Max Response
Time/Maximum Response Delay for IGMP/MLD queries
sent by the bridge.
mcast_membership_interval MEMBERSHIP_INTERVAL -
delay after which the bridge will leave a group,
if no membership reports for this group are
received.
mcast_stats_enabled MCAST_STATS_ENABLED - enable
(MCAST_STATS_ENABLED > 0) or disable
(MCAST_STATS_ENABLED == 0) multicast (IGMP/MLD)
stats accounting.
mcast_igmp_version IGMP_VERSION - set the IGMP
version.
mcast_mld_version MLD_VERSION - set the MLD
version.
nf_call_iptables NF_CALL_IPTABLES - enable
(NF_CALL_IPTABLES > 0) or disable
(NF_CALL_IPTABLES == 0) iptables hooks on the
bridge.
nf_call_ip6tables NF_CALL_IP6TABLES - enable
(NF_CALL_IP6TABLES > 0) or disable
(NF_CALL_IP6TABLES == 0) ip6tables hooks on the
bridge.
nf_call_arptables NF_CALL_ARPTABLES - enable
(NF_CALL_ARPTABLES > 0) or disable
(NF_CALL_ARPTABLES == 0) arptables hooks on the
bridge.
MACsec Type Support
For a link of type MACsec the following additional
arguments are supported:
ip link add link DEVICE name NAME type macsec [ [ address
<lladdr> ] port PORT | sci SCI ] [ cipher CIPHER_SUITE ] [
icvlen { 8..16 } ] [ encrypt { on | off } ] [ send_sci {
on | off } ] [ end_station { on | off } ] [ scb { on | off
} ] [ protect { on | off } ] [ replay { on | off } window
{ 0..2^32-1 } ] [ validate { strict | check | disabled } ]
[ encodingsa { 0..3 } ]
address <lladdr> - sets the system identifier
component of secure channel for this MACsec
device.
port PORT - sets the port number component of
secure channel for this MACsec device, in a range
from 1 to 65535 inclusive. Numbers with a leading
" 0 " or " 0x " are interpreted as octal and
hexadecimal, respectively.
sci SCI - sets the secure channel identifier for
this MACsec device. SCI is a 64bit wide number in
hexadecimal format.
cipher CIPHER_SUITE - defines the cipher suite to
use.
icvlen LENGTH - sets the length of the Integrity
Check Value (ICV).
encrypt on or encrypt off - switches between
authenticated encryption, or authenticity mode
only.
send_sci on or send_sci off - specifies whether
the SCI is included in every packet, or only when
it is necessary.
end_station on or end_station off - sets the End
Station bit.
scb on or scb off - sets the Single Copy Broadcast
bit.
protect on or protect off - enables MACsec
protection on the device.
replay on or replay off - enables replay
protection on the device.
window SIZE - sets the size of the replay
window.
validate strict or validate check or validate
disabled - sets the validation mode on the device.
encodingsa AN - sets the active secure association
for transmission.
VRF Type Support
For a link of type VRF the following additional arguments
are supported:
ip link add DEVICE type vrf table TABLE
table table id associated with VRF device
RMNET Type Support
For a link of type RMNET the following additional
arguments are supported:
ip link add link DEVICE name NAME type rmnet mux_id MUXID
mux_id MUXID - specifies the mux identifier for
the rmnet device, possible values 1-254.
XFRM Type Support
For a link of type XFRM the following additional arguments
are supported:
ip link add DEVICE type xfrm dev PHYS_DEV [ if_id IF_ID ]
dev PHYS_DEV - specifies the underlying physical
interface from which transform traffic is sent and
received.
if_id IF-ID - specifies the hexadecimal lookup key
used to send traffic to and from specific xfrm
policies. Policies must be configured with the
same key. If not set, the key defaults to 0 and
will match any policies which similarly do not
have a lookup key configuration.
ip link delete - delete virtual link
dev DEVICE
specifies the virtual device to act operate on.
group GROUP
specifies the group of virtual links to delete. Group 0 is
not allowed to be deleted since it is the default group.
type TYPE
specifies the type of the device.
ip link set - change device attributes
Warning: If multiple parameter changes are requested, ip aborts
immediately after any of the changes have failed. This is the
only case when ip can move the system to an unpredictable state.
The solution is to avoid changing several parameters with one ip
link set call. The modifier change is equivalent to set.
dev DEVICE
DEVICE specifies network device to operate on. When
configuring SR-IOV Virtual Function (VF) devices, this
keyword should specify the associated Physical Function
(PF) device.
group GROUP
GROUP has a dual role: If both group and dev are present,
then move the device to the specified group. If only a
group is specified, then the command operates on all
devices in that group.
up and down
change the state of the device to UP or DOWN.
arp on or arp off
change the NOARP flag on the device.
multicast on or multicast off
change the MULTICAST flag on the device.
allmulticast on or allmulticast off
change the ALLMULTI flag on the device. When enabled,
instructs network driver to retrieve all multicast packets
from the network to the kernel for further processing.
promisc on or promisc off
change the PROMISC flag on the device. When enabled,
activates promiscuous operation of the network device.
trailers on or trailers off
change the NOTRAILERS flag on the device, NOT used by the
Linux and exists for BSD compatibility.
protodown on or protodown off
change the PROTODOWN state on the device. Indicates that a
protocol error has been detected on the port. Switch
drivers can react to this error by doing a phys down on
the switch port.
protodown_reason PREASON on or off
set PROTODOWN reasons on the device. protodown reason bit
names can be enumerated under
/etc/iproute2/protodown_reasons.d/. possible reasons bits
0-31
dynamic on or dynamic off
change the DYNAMIC flag on the device. Indicates that
address can change when interface goes down (currently NOT
used by the Linux).
name NAME
change the name of the device. This operation is not
recommended if the device is running or has some addresses
already configured.
txqueuelen NUMBER
txqlen NUMBER
change the transmit queue length of the device.
mtu NUMBER
change the MTU of the device.
address LLADDRESS
change the station address of the interface.
broadcast LLADDRESS
brd LLADDRESS
peer LLADDRESS
change the link layer broadcast address or the peer
address when the interface is POINTOPOINT.
netns NETNSNAME | PID
move the device to the network namespace associated with
name NETNSNAME or process PID.
Some devices are not allowed to change network namespace:
loopback, bridge, wireless. These are network namespace
local devices. In such case ip tool will return "Invalid
argument" error. It is possible to find out if device is
local to a single network namespace by checking netns-
local flag in the output of the ethtool:
ethtool -k DEVICE
To change network namespace for wireless devices the iw
tool can be used. But it allows to change network
namespace only for physical devices and by process PID.
alias NAME
give the device a symbolic name for easy reference.
group GROUP
specify the group the device belongs to. The available
groups are listed in file /etc/iproute2/group.
vf NUM specify a Virtual Function device to be configured. The
associated PF device must be specified using the dev
parameter.
mac LLADDRESS - change the station address for the
specified VF. The vf parameter must be specified.
vlan VLANID - change the assigned VLAN for the
specified VF. When specified, all traffic sent
from the VF will be tagged with the specified VLAN
ID. Incoming traffic will be filtered for the
specified VLAN ID, and will have all VLAN tags
stripped before being passed to the VF. Setting
this parameter to 0 disables VLAN tagging and
filtering. The vf parameter must be specified.
qos VLAN-QOS - assign VLAN QOS (priority) bits for
the VLAN tag. When specified, all VLAN tags
transmitted by the VF will include the specified
priority bits in the VLAN tag. If not specified,
the value is assumed to be 0. Both the vf and vlan
parameters must be specified. Setting both vlan
and qos as 0 disables VLAN tagging and filtering
for the VF.
proto VLAN-PROTO - assign VLAN PROTOCOL for the
VLAN tag, either 802.1Q or 802.1ad. Setting to
802.1ad, all traffic sent from the VF will be
tagged with VLAN S-Tag. Incoming traffic will
have VLAN S-Tags stripped before being passed to
the VF. Setting to 802.1ad also enables an option
to concatenate another VLAN tag, so both S-TAG and
C-TAG will be inserted/stripped for
outgoing/incoming traffic, respectively. If not
specified, the value is assumed to be 802.1Q. Both
the vf and vlan parameters must be specified.
rate TXRATE -- change the allowed transmit
bandwidth, in Mbps, for the specified VF. Setting
this parameter to 0 disables rate limiting. vf
parameter must be specified. Please use new API
max_tx_rate option instead.
max_tx_rate TXRATE - change the allowed maximum
transmit bandwidth, in Mbps, for the specified VF.
Setting this parameter to 0 disables rate
limiting. vf parameter must be specified.
min_tx_rate TXRATE - change the allowed minimum
transmit bandwidth, in Mbps, for the specified VF.
Minimum TXRATE should be always <= Maximum TXRATE.
Setting this parameter to 0 disables rate
limiting. vf parameter must be specified.
spoofchk on|off - turn packet spoof checking on or
off for the specified VF.
query_rss on|off - toggle the ability of querying
the RSS configuration of a specific
VF. VF RSS information like RSS hash key may be
considered sensitive
on some devices where this information is shared
between VF and PF
and thus its querying may be prohibited by
default.
state auto|enable|disable - set the virtual link
state as seen by the specified VF. Setting to auto
means a reflection of the PF link state, enable
lets the VF to communicate with other VFs on this
host even if the PF link state is down, disable
causes the HW to drop any packets sent by the VF.
trust on|off - trust the specified VF user. This
enables that VF user can set a specific feature
which may impact security and/or performance.
(e.g. VF multicast promiscuous mode)
node_guid eui64 - configure node GUID for
Infiniband VFs.
port_guid eui64 - configure port GUID for
Infiniband VFs.
xdp object | pinned | off
set (or unset) a XDP ("eXpress Data Path") BPF program to
run on every packet at driver level. ip link output will
indicate a xdp flag for the networking device. If the
driver does not have native XDP support, the kernel will
fall back to a slower, driver-independent "generic" XDP
variant. The ip link output will in that case indicate
xdpgeneric instead of xdp only. If the driver does have
native XDP support, but the program is loaded under
xdpgeneric object | pinned then the kernel will use the
generic XDP variant instead of the native one. xdpdrv has
the opposite effect of requestsing that the automatic
fallback to the generic XDP variant be disabled and in
case driver is not XDP-capable error should be returned.
xdpdrv also disables hardware offloads. xdpoffload in ip
link output indicates that the program has been offloaded
to hardware and can also be used to request the "offload"
mode, much like xdpgeneric it forces program to be
installed specifically in HW/FW of the apater.
off (or none ) - Detaches any currently attached XDP/BPF
program from the given device.
object FILE - Attaches a XDP/BPF program to the given
device. The FILE points to a BPF ELF file (f.e. generated
by LLVM) that contains the BPF program code, map
specifications, etc. If a XDP/BPF program is already
attached to the given device, an error will be thrown. If
no XDP/BPF program is currently attached, the device
supports XDP and the program from the BPF ELF file passes
the kernel verifier, then it will be attached to the
device. If the option -force is passed to ip then any
prior attached XDP/BPF program will be atomically
overridden and no error will be thrown in this case. If no
section option is passed, then the default section name
("prog") will be assumed, otherwise the provided section
name will be used. If no verbose option is passed, then a
verifier log will only be dumped on load error. See also
EXAMPLES section for usage examples.
section NAME - Specifies a section name that contains the
BPF program code. If no section name is specified, the
default one ("prog") will be used. This option is to be
passed with the object option.
verbose - Act in verbose mode. For example, even in case
of success, this will print the verifier log in case a
program was loaded from a BPF ELF file.
pinned FILE - Attaches a XDP/BPF program to the given
device. The FILE points to an already pinned BPF program
in the BPF file system. The option section doesn't apply
here, but otherwise semantics are the same as with the
option object described already.
master DEVICE
set master device of the device (enslave device).
nomaster
unset master device of the device (release device).
addrgenmode eui64|none|stable_secret|random
set the IPv6 address generation mode
eui64 - use a Modified EUI-64 format interface identifier
none - disable automatic address generation
stable_secret - generate the interface identifier based on
a preset
/proc/sys/net/ipv6/conf/{default,DEVICE}/stable_secret
random - like stable_secret, but auto-generate a new
random secret if none is set
link-netnsid
set peer netnsid for a cross-netns interface
type ETYPE TYPE_ARGS
Change type-specific settings. For a list of supported
types and arguments refer to the description of ip link
add above. In addition to that, it is possible to
manipulate settings to slave devices:
Bridge Slave Support
For a link with master bridge the following additional
arguments are supported:
ip link set type bridge_slave [ fdb_flush ] [ state STATE
] [ priority PRIO ] [ cost COST ] [ guard { on | off } ] [
hairpin { on | off } ] [ fastleave { on | off } ] [
root_block { on | off } ] [ learning { on | off } ] [
flood { on | off } ] [ proxy_arp { on | off } ] [
proxy_arp_wifi { on | off } ] [ mcast_router
MULTICAST_ROUTER ] [ mcast_fast_leave { on | off} ] [
mcast_flood { on | off } ] [ mcast_to_unicast { on | off }
] [ group_fwd_mask MASK ] [ neigh_suppress { on | off } ]
[ vlan_tunnel { on | off } ] [ isolated { on | off } ] [
backup_port DEVICE ] [ nobackup_port ]
fdb_flush - flush bridge slave's fdb dynamic
entries.
state STATE - Set port state. STATE is a number
representing the following states: 0 (disabled), 1
(listening), 2 (learning), 3 (forwarding), 4
(blocking).
priority PRIO - set port priority (allowed values
are between 0 and 63, inclusively).
cost COST - set port cost (allowed values are
between 1 and 65535, inclusively).
guard { on | off } - block incoming BPDU packets
on this port.
hairpin { on | off } - enable hairpin mode on this
port. This will allow incoming packets on this
port to be reflected back.
fastleave { on | off } - enable multicast fast
leave on this port.
root_block { on | off } - block this port from
becoming the bridge's root port.
learning { on | off } - allow MAC address learning
on this port.
flood { on | off } - open the flood gates on this
port, i.e. forward all unicast frames to this port
also. Requires proxy_arp and proxy_arp_wifi to be
turned off.
proxy_arp { on | off } - enable proxy ARP on this
port.
proxy_arp_wifi { on | off } - enable proxy ARP on
this port which meets extended requirements by
IEEE 802.11 and Hotspot 2.0 specifications.
mcast_router MULTICAST_ROUTER - configure this
port for having multicast routers attached. A port
with a multicast router will receive all multicast
traffic. MULTICAST_ROUTER may be either 0 to
disable multicast routers on this port, 1 to let
the system detect the presence of of routers (this
is the default), 2 to permanently enable multicast
traffic forwarding on this port or 3 to enable
multicast routers temporarily on this port, not
depending on incoming queries.
mcast_fast_leave { on | off } - this is a synonym
to the fastleave option above.
mcast_flood { on | off } - controls whether a
given port will flood multicast traffic for which
there is no MDB entry.
mcast_to_unicast { on | off } - controls whether a
given port will replicate packets using unicast
instead of multicast. By default this flag is
off.
group_fwd_mask MASK - set the group forward mask.
This is the bitmask that is applied to decide
whether to forward incoming frames destined to
link-local addresses, ie addresses of the form
01:80:C2:00:00:0X (defaults to 0, ie the bridge
does not forward any link-local frames coming on
this port).
neigh_suppress { on | off } - controls whether
neigh discovery (arp and nd) proxy and suppression
is enabled on the port. By default this flag is
off.
vlan_tunnel { on | off } - controls whether vlan
to tunnel mapping is enabled on the port. By
default this flag is off.
backup_port DEVICE - if the port loses carrier all
traffic will be redirected to the configured
backup port
nobackup_port - removes the currently configured
backup port
Bonding Slave Support
For a link with master bond the following additional
arguments are supported:
ip link set type bond_slave [ queue_id ID ]
queue_id ID - set the slave's queue ID (a 16bit
unsigned value).
MACVLAN and MACVTAP Support
Modify list of allowed macaddr for link in source mode.
ip link set type { macvlan | macvap } [ macaddr COMMAND
MACADDR ... ]
Commands:
add - add MACADDR to allowed list
set - replace allowed list
del - remove MACADDR from allowed list
flush - flush whole allowed list
ip link show - display device attributes
dev NAME (default)
NAME specifies the network device to show.
group GROUP
GROUP specifies what group of devices to show.
up only display running interfaces.
master DEVICE
DEVICE specifies the master device which enslaves devices
to show.
vrf NAME
NAME speficies the VRF which enslaves devices to show.
type TYPE
TYPE specifies the type of devices to show.
Note that the type name is not checked against the list of
supported types - instead it is sent as-is to the kernel.
Later it is used to filter the returned interface list by
comparing it with the relevant attribute in case the
kernel didn't filter already. Therefore any string is
accepted, but may lead to empty output.
ip link xstats - display extended statistics
type TYPE
TYPE specifies the type of devices to display extended
statistics for.
ip link afstats - display address-family specific statistics
dev DEVICE
DEVICE specifies the device to display address-family
statistics for.
ip link help - display help
TYPE specifies which help of link type to display.
GROUP
may be a number or a string from the file /etc/iproute2/group
which can be manually filled.
