Путеводитель по Руководству Linux
  User  |  Syst  |  Libr  |  Device  |  Files  |  Other  |  Admin  |  Head  |


   lttng-relayd    ( 8 )

демон реле LTTng 2 (LTTng 2 relay daemon)

Имя (Name)

lttng-relayd - LTTng 2 relay daemon

Синопсис (Synopsis)

lttng-relayd [--background | --daemonize] [--control-port=URL] [--data-port=URL] [--live-port=URL] [--output=PATH] [-v | -vv | -vvv]

Описание (Description)

The Linux Trace Toolkit: next generation <https://lttng.org/> is an open source software package used for correlated tracing of the Linux kernel, user applications, and user libraries.

LTTng consists of Linux kernel modules (for Linux kernel tracing) and dynamically loaded libraries (for user application and library tracing).

The LTTng relay daemon is responsible for receiving trace data from possibly remote LTTng session/consumer daemons and for writing it to the local file system. The relay daemon also accepts LTTng live connections from compatible viewers; this is the official approach to viewing LTTng events as they are emitted.

The relay daemon listens by default on all network interfaces to gather trace data, but only on localhost for LTTng live connections.

The relay daemon does not require any particular permissions, as long as it can write to the output directory and listen on the configured ports. If a user is within a secured network and/or has proper firewall settings, lttng-relayd can listen to LTTng live connections from all network interfaces by specifying --live-port=tcp://localhost:5344.

Once a trace has been streamed completely, the trace can be processed by any tool that can process an LTTng trace located on the local file system.

Output directory By default, the relay daemon writes the traces to:

$LTTNG_HOME/lttng-traces/HOSTNAME/SESSION/DOMAIN

with:

HOSTNAME Remote hostname.

SESSION Full session name.

DOMAIN Tracing domain.

You can override the default output directory prefix ($LTTNG_HOME/lttng-traces) with the --output option. The other parts depend on the remote configuration.

URL format The --control-port, --data-port, and --live-port options specify URLs.

The format of those URLs is:

tcp://(HOST | IPADDR):PORT

with:

(HOST | IPADDR) Binding hostname or IP address (IPv6 address must be enclosed in brackets ([ and ]); see RFC 2732 <https://www.ietf.org/rfc/rfc2732.txt>).

PORT TCP port.

Параметры (Options)

Daemon
       -b, --background
           Start as Unix daemon, but keep file descriptors (console)
           open. Use the --daemonize option instead to close the file
           descriptors.


       -d, --daemonize
           Start as Unix daemon, and close file descriptors (console).
           Use the --background option instead to keep the file
           descriptors open.


       -g GROUP, --group=GROUP
           Use GROUP as Unix tracing group (default: tracing).


       -o PATH, --output=PATH
           Set base directory of written trace data to PATH.


           See the Output directory section above for more information.


       -v, --verbose
           Increase verbosity.


           Three levels of verbosity are available, which are triggered
           by appending additional v letters to the option (that is, -vv
           and -vvv).


   Ports
       See the URL format section above for more information about the
       syntax of the following options' URL argument.


       -C URL, --control-port=URL
           Listen to control data on URL URL (default:
           tcp://0.0.0.0:5342).


       -D URL, --data-port=URL
           Listen to trace data on URL URL (default:
           tcp://0.0.0.0:5343).


       -L URL, --live-port=URL
           Listen to LTTng live connections on URL URL (default:
           tcp://localhost:5344).


   Program information
       -h, --help
           Show help.


       -V, --version
           Show version.

Переменные окружения (Environment variables)

LTTNG_ABORT_ON_ERROR Set to 1 to abort the process after the first error is encountered.

LTTNG_NETWORK_SOCKET_TIMEOUT Socket connection, receive and send timeout (milliseconds). A value of 0 or -1 uses the timeout of the operating system (default).

LTTNG_RELAYD_HEALTH Path to relay daemon health's socket.

LTTNG_RELAYD_TCP_KEEP_ALIVE Set to 1 to enable TCP keep-alive.

The TCP keep-alive mechanism allows the detection of dead peers (lttng-sessiond(8)) in cases of unclean termination (for example, a hard reset) of a peer.

Supported on Linux and Solaris only. The default behaviour of the TCP keep-alive mechanism is OS-specific.

Search for tcp_keepalive in tcp(7) for more information.

LTTNG_RELAYD_TCP_KEEP_ALIVE_ABORT_THRESHOLD The time threshold in seconds to abort a TCP connection after the keep-alive probing mechanism has failed.

Set to 0 or -1 to use the value chosen by the operating system (default).

Supported on Solaris 11 only.

Search for tcp_keepalive_abort_threshold in tcp(7) for more information.

LTTNG_RELAYD_TCP_KEEP_ALIVE_IDLE_TIME Number of seconds a connection needs to be idle before TCP begins sending out keep-alive probes.

Set to 0 or -1 to use the value chosen by the operating system (default).

Supported on Linux and Solaris 11 only.

On Solaris 11, the accepted values are -1, 0, and 10 to 864000.

Search for tcp_keepalive_time and tcp_keepalive_interval in tcp(7) on Solaris 11 for more information.

LTTNG_RELAYD_TCP_KEEP_ALIVE_MAX_PROBE_COUNT Maximum number of TCP keep-alive probes to send before giving up and killing the connection if no response is obtained from the other end.

Set to 0 or -1 to use the value chosen by the operating system (default).

Supported on Linux only.

Search for tcp_keepalive_probes in tcp(7) for more information.

LTTNG_RELAYD_TCP_KEEP_ALIVE_PROBE_INTERVAL Number of seconds between TCP keep-alive probes.

Set to 0 or -1 to use the value chosen by the operating system (default).

Supported on Linux only.

Search for tcp_keepalive_intvl in tcp(7) for more information.

Файлы (Files)

$LTTNG_HOME/.lttng User LTTng runtime and configuration directory.

$LTTNG_HOME/lttng-traces Default output directory of LTTng traces. This can be overridden with the --output option.

Note $LTTNG_HOME defaults to $HOME when not explicitly set.

Статус выхода (Exit)

0 Success

1 Error

3 Fatal error

Ограничения (Limitations)

As of this version, only the TCP protocol is supported for both control and data ports. In future versions, TCP will remain the sole available protocol for control data since those communications are low-volume and need absolute reliability; trace data could be carried over UDP.

For an unprivileged user running lttng-relayd, the maximum number of file descriptors per process is usually 1024. This limits the number of connections and opened trace files. This limit can be configured with ulimit(3).

Ошибки (баги) (Bugs)

If you encounter any issue or usability problem, please report it on the LTTng bug tracker <https://bugs.lttng.org/projects/lttng- tools>.

Ресурсы (Resources)

• LTTng project website <https://lttng.org>

• LTTng documentation <https://lttng.org/docs>

• Git repositories <http://git.lttng.org>

• GitHub organization <http://github.com/lttng>

• Continuous integration <http://ci.lttng.org/>

• Mailing list <http://lists.lttng.org> for support and development: lttng-dev@lists.lttng.org

• IRC channel <irc://irc.oftc.net/lttng>: #lttng on irc.oftc.net