найти услуги PCP в сети (find PCP services on the network)
Имя (Name)
pmfind - find PCP services on the network
Синопсис (Synopsis)
pmfind [-CqrSV?] [-m mechanism] [-s service] [-t timeout]
Описание (Description)
pmfind searches for instances of the specified PCP service being
advertised on the network and prints a list of URLs corresponding
to the services discovered. It can be used in conjunction with
pmfind_check(1) to automate the monitoring of remote PCP
collector systems.
Параметры (Options)
The available command line options are:
-C, --containers
Performs containers discovery as well, for each discovered
pmcd(1) service.
-m mechanism, --mechanism=mechanism
This option sets the mechanism that pmfind uses when
performing service discovery. By default, or if the keyword
all is specified, every available mechanism will be used
(iteratively). See the ``MECHANISMS'' section for a
description of each available discovery mechanism.
-q, --quiet
This option suppresses all output on the standard output
stream.
-r, --resolve
Requests that DNS name resolution be attempted for the
addresses of any discovered services. The default is to
display the network addresses of any discovered services.
-s service, --service=service
By default pmfind will search for all supported PCP
services, however a specific PCP service to discover can be
specified using the -s option. Supported services are
pmcd(1), and pmproxy(1).
-S, --sources
Reports source identifiers for each discovered pmcd(1)
service. These identifiers are unique for each host, and
are formed using the (non-optional) context labels available
for every PCP collector. Because the discovery process will
often identify multiple paths to an individual collector
host, this option is an important part of the process of
using pmfind in conjunction with pmfind_check(1), to ensure
only one pmie(1) and/or pmlogger(1) process is started for
each discovered collector host. The source identifiers
reported by pmfind are the same as the source identifiers
reported by the pminfo(1) and pmseries(1) commands.
-t seconds, --timeout=seconds
Sets the maximum amount of time in seconds that pmfind will
take before interrupting the service discovery. The time
argument is a floating point number representing the number
of seconds before timing out. The default is to take as
much time as is needed to complete the process.
-V, --version
Display version number and exit.
-?, --help
Display usage message and exit.
MECHANISMS
Supported mechanisms for service discovery are:
avahi Searches for services which are broadcasting using mDNS
via avahi-daemon(8). An optional suffix ",timeout=N" may
be added to limit the amount of time waiting for the
avahi-daemon. N is a floating point number specifying the
number of seconds to wait. The default is 0.5 seconds.
This timeout may also be specified by setting the
environment variable AVAHI_DISCOVERY_TIMEOUT to the
desired number of seconds. If both are specified, then
the value specified in the environment variable takes
precedence.
probe=<net-address>/<mask-bits>
Actively probes the given subnet for the requested PCP
service(s). <net-address> is an Inet or IPv6 network
address and <mask-bits> is the number of bits used to
define the subnet. For example, 192.168.1.0/24 defines an
8 bit subnet consisting of the addresses 192.168.1.0
through 192.168.1.255. An optional suffix ",maxThreads=N"
may be added to limit the number of threads used while
probing. The default is the value of FD_SETSIZE (which is
typically 1024) or the number of addresses in the subnet,
whichever is less. An optional suffix ",timeout=N" may be
added to limit the amount of time spent waiting for each
connection attempt. N is a floating point number
specifying the number of seconds to wait. The default is
0.02 seconds (20 milliseconds).
shell Probes the list of addresses provided by scripts for
requested PCP service(s). Several optional, comma-
separated parameters can also be provided. The "path=DIR"
option specifies the directory where commands like
pcp-kube-pods(1) are located (defaults to
$PCP_BINADM_DIR/discover/). This setting can be further
restricted to an individual command using the command=CMD
option, but the default is to use all available commands
from the path. The "maxThreads=N" option limits the
number of threads used while probing. The default is the
value of FD_SETSIZE (which is typically 1024) or the
number of addresses returned by the scripts, whichever is
less. The "timeout=N" option may be added to limit the
amount of time spent waiting for each connection attempt.
N is a floating point number specifying the number of
seconds to wait. The default is 0.02 seconds (20
milliseconds).
Сигналы (Signals)
pmfind will interrupt the service discovery process when one of
the following signals is received: SIGHUP, SIGPIPE, SIGINT,
SIGTERM, SIGXFSZ, SIGXCPU. pmfind will report any results which
were discovered up to point of the interruption.
Диагностика (Diagnostic)
The value of the exit status from the command is zero when
services were successfully located, one if no services were
found, and two if an error occurred.
In the event of an error a message will be generated on standard
error that is intended to be self-explanatory.
Файлы (Files)
$PCP_BINADM_DIR/discover
default path to address discovery scripts
Окружение PCP (PCP environment)
Environment variables with the prefix PCP_ are used to
parameterize the file and directory names used by PCP. On each
installation, the file /etc/pcp.conf contains the local values
for these variables. The $PCP_CONF variable may be used to
specify an alternative configuration file, as described in
pcp.conf(5).
Смотри также (See also)
PCPIntro(1), pmcd(1), pmfind_check(1), pmie(1), pminfo(1),
pmlogger(1), pmproxy(1), pmseries(1), pcp-kube-pods(1), PMAPI(3),
PMWEBAPI(3), pmDiscoverServices(3), pcp.conf(5) and pcp.env(5).
