сервис SystemTap initscript (SystemTap initscript service)
Имя (Name)
systemtap - SystemTap initscript service
Синопсис (Synopsis)
service systemtap COMMAND [OPTIONS] [SCRIPT...]
Описание (Description)
The SystemTap initscript aims to provide a way to run scripts as
a service and easily control them individually. Scripts can be
configured to start upon manual request, or during system
startup. On dracut-based systems, it is also possible to
integrate scripts in the initramfs and have them start during
early-boot.
There are various parameters and options available to modify
global behaviour, as well as script behaviour. Dependencies
between scripts can be established so that starting one starts
others.
The configuration file of the initscript is located at
${prefix}/etc/systemtap/config. Acceptable parameters are
detailed in the GLOBAL PARAMETERS section.
Scripts must be placed in the ${prefix}/etc/systemtap/script.d
directory and must have a .stp extension. When referring to them
on the command-line however, there in no need to include the .stp
extension. Script names can only contain alphanumeric characters
(and '_') and must not start with a number. The scripts directory
may be changed by setting the SCRIPT_PATH parameter in the
configuration file.
Команды (Commands)
One of the commands below must be specified:
start Start SCRIPTs. If no scripts are specified, start the
scripts specified by the DEFAULT_START configuration. If
DEFAULT_START is not set, start all scripts in the script
directory. For scripts already started, the command is
ignored. The command will fail if the scripts fail to
start (see also the PASSALL configuration).
If the AUTOCOMPILE configuration is on, the command will
try to compile or update the specified scripts when one of
the below conditions is true:
- The compiled cache file does not exist.
- The mtime (modified timestamp) of the original script
file is newer than the time of the compiled script
cache.
- The specified stap options used to compile the script
has been changed (see also the SCRIPT PARAMETERS
section).
- The result of `uname -a` has been changed.
stop Stop SCRIPTs. If no scripts are specified, stop all
running scripts. For scripts already stopped, the command
is ignored. The command will fail if the scripts fail to
stop (see also the PASSALL configuration).
restart
Stop and start SCRIPTs.
status Show the state of SCRIPTs and their dependencies.
compile
Compile SCRIPTs but do not start them. If the scripts have
already been compiled, prompt for confirmation before
overwriting cache. Compile for the current kernel, or the
kernel release specified by the -r option.
onboot Make SCRIPTs part of the initramfs so that they are
started earlier during the boot process. This command is
only available on dracut-based systems. If no scripts are
specified, create a normal initramfs devoid of any
SystemTap files.
The initramfs is created for the current kernel, or the
kernel release specified by the -r option. The path of the
created initramfs defaults to /boot/initramfs-KVER.img,
where KVER is the output of `uname -r`. The bootloader is
also updated (using new-kernel-pkg(8)) to make the kernel
entry use the new initramfs file. Use the -o option to
specify a different path (the bootloader will not be
updated).
If the output file already exists, it is overwritten,
unless the -b switch is given, in which case the file is
appended .bak rather than overwritten. However, if there
is already a .bak version of the file, the backup will not
be overwritten.
WARNING: do not use the -o option of stap(1) with onboot
scripts because the script is started before the root
filesystem is even mounted. Increase the buffer size if
more space is needed.
cleanup
Delete the compiled SCRIPTs from cache. If no scripts are
specified, then all compiled scripts are deleted. Only the
cache for the current kernel is deleted, or the kernel
release specified by the -r option. Prompt for
confirmation before deleting.
Параметры (Options)
Many of the commands can also take options. However, since users
can't pass these options on boot, they are only meant for
managing scripts after boot and for testing. Available options
are:
-c CONFIG_FILE
Specify a different configuration file in place of the
default one.
-R When using the start and stop commands, also include the
scripts' dependencies (recursively).
-r KERNEL_RELEASE
When using the compile, onboot, and cleanup commands,
specify the target kernel version rather than using the
current one. Must be in the same format as `uname -r`.
-y Answer yes for all prompts.
-o PATH.IMG
When using the onboot command, specify the output path of
the created initramfs. When specified, the bootloader
configuration is not updated.
-b When using the onboot command, backup an existing
initramfs image by adding a .bak extension rather than
overwriting it. Without this option, the initramfs is
overwritten.
Глобальные параметры (Global parameters)
These parameters affect the general behaviour of the SystemTap
initscript service. They can be specified in the configuration
file.
SCRIPT_PATH
Specify the absolute path of the script directory. These
are the scripts on which the initscript can operate.
Scripts must have the .stp extension. The default path is
${prefix}/etc/systemtap/script.d.
CONFIG_PATH
Specify the absolute path of the script configuration
directory. These configuration files contain options for
specific scripts. They must have the .conf extension. The
default path is ${prefix}/etc/systemtap/conf.d.
CACHE_PATH
Specify the absolute path of the cache directory. The
default path is ${prefix}/var/cache/systemtap.
TEMP_PATH
Specify the absolute path of the temporary directory in
which SystemTap makes temporary directories to compile
scripts. The default path is /tmp.
STAT_PATH
Specify the absolute path of the directory containing PID
files used to track the status of SystemTap scripts. The
default path is ${prefix}/var/run/systemtap.
LOG_FILE
Specify the absolute path of the log file. All messages
are sent to this file, including compilation and runtime
errors. The default path is
${prefix}/var/log/systemtap.log.
PASSALL
If this is set yes, initscript commands that operate on
multiple scripts will report as failed when the action
could not be performed on at least one script. If set to
no, only a warning is emitted. The default is yes.
RECURSIVE
If this is set yes, the initscript will always follow
script dependencies recursively. This means that there is
no need to specify the -R option. This flag is effective
only if you specify script(s) from the command-line. The
default is no.
AUTOCOMPILE
If this is set yes, the initscript automatically tries to
compile specified scripts when needed if there is no valid
cache. Otherwise, the related command simply fails. The
default is yes.
DEFAULT_START
Specify scripts which will be started by default. If
omitted (or empty), all scripts in the script directory
will be started. The default is "".
ALLOW_CACHEONLY
If this is set yes, the initscript will also allow
operating on scripts that are located in the cache
directory, but not in the script directory. The default is
no.
WARNING: the initscript may load unexpected obsolete
caches with this option. The cache directory should be
checked before enabling this option.
LOG_BOOT_ERR
Because boot-time scripts are run before the root
filesystem is mounted, staprun's stderr cannot be logged
to the LOG_FILE as usual. However, the log can instead be
output to /var/run/systemtap/$script.log by setting
LOG_BOOT_ERR to yes. If STAT_PATH is different from the
default, the log files will be moved there upon executing
any of the initscript commands. The default is no.
Here is a global configuration file example:
SCRIPT_PATH=/var/systemtap/script.d/
PASSALL=yes
RECURSIVE=no
SCRIPT PARAMETERS
These parameters affect the compilation or runtime behaviour of
specific SystemTap scripts. They must be placed in config files
located in the CONFIG_PATH directory.
<SCRIPT>_OPT
Specify options passed to the stap(1) command for the
SCRIPT. Here, SCRIPT is the name of the script file
without the .stp extension. Note that the -F option is
always added.
The following options are ignored when compiling scripts:
-p, -m, -r, -c, -x, -e, -s, -o, -h, -V, -k.
The following options are ignored when running starting
scripts: -h, -V, -v, -t, -p, -I, -e, -R, -r, -m, -k, -g,
-P, -D, -b, -u, -q, -w, -l, -d, -L, -F, and all long
options.
<SCRIPT>_REQ
Specify script dependencies (i.e. which script this script
requires). For example, if foo.stp requires (or needs to
run after) bar.stp, set
foo_REQ="bar"
Specify multiple scripts by separating their names by
spaces.
Here is a script configuration file example:
script1_OPT="-o /var/log/script1.out"
script2_OPT="-o /var/log/script2.out"
script2_REQ="script1"
Примеры (Examples)
INSTALLING SCRIPTS
We first copy a SystemTap script (e.g. "script1.stp") into
the script directory:
# cp script1.stp /etc/systemtap/script.d/
We can then set any script options, for example:
# vi /etc/systemtap/conf.d/group1
script1_OPT="-o /var/log/group1.out"
We then install a script (e.g. "script2.stp") which needs
to run after script1. In this case, we can do the
following:
# cp script2.stp /etc/systemtap/script.d/
# vi /etc/systemtap/conf.d/group1
script2_OPT="-o /var/log/group2.out"
script2_REQ="script1"
This way, if stap(1) fails to run script1, the initscript
will not even try to run script2.
TESTING
After installing scripts, we can test that they work by
simply doing:
# service systemtap start
# service systemtap stop
We could be more specific as well, for example:
# service systemtap start script1
# service systemtap stop script1
If there were no errors, we are ready to use it.
ENABLING SERVICE
After we're satisfied with the scripts and their tests, we
can enable the SystemTap initscript service:
# chkconfig systemtap on
DELETING SCRIPTS
Scripts are deleted by simply removing them from the
script directory and removing any configuration lines
specific to them:
# rm /etc/systemtap/script.d/script2.stp
# vi /etc/systemtap/conf.d/group1
If the script is still running, we also need to stop it:
# service systemtap stop script2
We can then also remove the cache associated with the
script:
# service systemtap cleanup script2
PREPARING FOR KERNEL UPDATES
Usually, there is nothing to do when booting into a new
kernel. The initscript will see that the kernel version is
different and will compile the scripts. The compilation
can be done beforehand as well to avoid having to compile
during boot by using the -r option:
# service systemtap compile myscript -r <NEW_KERNEL_VERSION>
IMPORTING COMPILED SCRIPTS
For environments which lack compilation infrastructure
(e.g. no compilers or debuginfo), such as a production
system, the scripts can be compiled on another
(development) machine and then transferred over to the
production system:
# service systemtap compile myscript -r \
> <KERNEL_VERSION_OF_TARGET_MACHINE>
# tar czf stap-scripts-<kernel-version>.tar.gz \
> /var/cache/systemtap/<kernel-version> \
> /etc/systemtap/conf.d/<configfile>
And then copy this package to the target machine and
extract it.
STARTING SCRIPTS DURING EARLY-BOOT
The initscript also allows us to start scripts earlier
during the boot process by creating an initramfs
containing the script's module. The system must be dracut-
based for this to work. Starting a script at this stage
gives access to information otherwise very hard to obtain.
We first install the script by copying it into the script
directory as usual and setting whatever options we'd like:
# cp myscript.stp /etc/systemtap/script.d
# vi /etc/systemtap/conf.d/myscript.conf
To add the script to the initramfs, we use the onboot
command:
# service systemtap onboot myscript
If the script is not already compiled and cached, it will
be done at this point. A new initramfs will then be
created at the default location. We can use the -b option
to ensure that the existing initramfs is backed up. We can
then restart the system.
USING A DIFFERENT INITRAMFS
If we would prefer to only start the script for one boot
and not others, it might be easier to instead use the -o
option to specify a different initramfs output file:
# service systemtap onboot myscript \
> -o /boot/special_initramfs.img
Once the initramfs is created, it's simply a matter of
changing the command-line options at boot-time so that the
new image is used rather than the usual one.
CREATING AN INITRAMFS FOR A DIFFERENT KERNEL
Just like the compile command, we can use the -r option to
specify the kernel for which we want to create the
initramfs. This is useful when we are about to upgrade and
would like to prepare in advance. For example:
# service systemtap onboot myscript \
> -r 3.12.6-200.fc19.x86_64
REMOVING SCRIPTS FROM THE INITRAMFS
Finally, to remove all script from the initramfs, we
simple run the onboot command without specifying any
scripts:
# service systemtap onboot
This will simply create a standard initramfs without any
SystemTap modules inserted.
TROUBLESHOOTING EARLY-BOOT ISSUES
There can be many reasons for which the module didn't
insert or did not work as expected. It may be useful to
turn on dracut debugging by adding 'rdinitdebug' to the
kernel command-line and checking dmesg/journalctl -ae.
Also, the stderr output of staprun can be captured by
setting the LOG_BOOT_ERR option to yes.
Смотри также (See also)
stap(1) dracut(8) new-kernel-pkg(8)
Ошибки (баги) (Bugs)
Use the Bugzilla link of the project web page or our mailing
list. http://sourceware.org/systemtap/ ,
<systemtap@sourceware.org>.
