`vgreduce` ( 8 )

удаление физических томов из группы томов (Remove physical volume(s) from a volume group)

Имя (Name)

vgreduce — Remove physical volume(s) from a volume group

Синопсис (Synopsis)

vgreduce option_args position_args [ option_args ]

Описание (Description)

vgreduce removes one or more unused PVs from a VG.

Использование (Usage)

Remove a PV from a VG.

vgreduce VG PV ... [ COMMON_OPTIONS ]

—

Remove all unused PVs from a VG.

vgreduce -a|--all VG [ COMMON_OPTIONS ]

—

Remove all missing PVs from a VG.

vgreduce --removemissing VG [ --mirrorsonly ] [ COMMON_OPTIONS ]

—

Common options for command: [ -A|--autobackup y|n ] [ -f|--force ] [ --reportformat basic|json ]

Common options for lvm: [ -d|--debug ] [ -h|--help ] [ -q|--quiet ] [ -t|--test ] [ -v|--verbose ] [ -y|--yes ] [ --commandprofile String ] [ --config String ] [ --devices PV ] [ --devicesfile String ] [ --driverloaded y|n ] [ --lockopt String ] [ --longhelp ] [ --nolocking ] [ --profile String ] [ --version ]

Параметры (Options)

-a|--all
              Removes all empty PVs if none are named on the command
              line.

       -A|--autobackup y|n
              Specifies if metadata should be backed up automatically
              after a change.  Enabling this is strongly advised! See
              vgcfgbackup(8) for more information.

       --commandprofile String
              The command profile to use for command configuration.  See
              lvm.conf(5) for more information about profiles.

       --config String
              Config settings for the command. These override
              lvm.conf(5) settings.  The String arg uses the same format
              as lvm.conf(5), or may use section/field syntax.  See
              lvm.conf(5) for more information about config.

       -d|--debug ...
              Set debug level. Repeat from 1 to 6 times to increase the
              detail of messages sent to the log file and/or syslog (if
              configured).

       --devices PV
              Devices that the command can use. This option can be
              repeated or accepts a comma separated list of devices.
              This overrides the devices file.

       --devicesfile String
              A file listing devices that LVM should use.  The file must
              exist in /etc/lvm/devices/ and is managed with the
              lvmdevices(8) command.  This overrides the lvm.conf(5)
              devices/devicesfile and devices/use_devicesfile settings.

       --driverloaded y|n
              If set to no, the command will not attempt to use device-
              mapper.  For testing and debugging.

       -f|--force ...
              Override various checks, confirmations and protections.
              Use with extreme caution.

       -h|--help
              Display help text.

       --lockopt String
              Used to pass options for special cases to lvmlockd.  See
              lvmlockd(8) for more information.

       --longhelp
              Display long help text.

       --mirrorsonly
              Only remove missing PVs from mirror LVs.

       --nolocking
              Disable locking.

       --profile String
              An alias for --commandprofile or --metadataprofile,
              depending on the command.

       -q|--quiet ...
              Suppress output and log messages. Overrides --debug and
              --verbose.  Repeat once to also suppress any prompts with
              answer 'no'.

       --removemissing
              Removes all missing PVs from the VG, if there are no LVs
              allocated on them. This resumes normal operation of the VG
              (new LVs may again be created, changed and so on).  If
              this is not possible because LVs are referencing the
              missing PVs, this option can be combined with --force to
              have the command remove any partial LVs. In this case, any
              LVs and dependent snapshots that were partly on the
              missing disks are removed completely, including those
              parts on disks that are still present.  If LVs spanned
              several disks, including ones that are lost, salvaging
              some data first may be possible by activating LVs in
              partial mode.

       --reportformat basic|json
              Overrides current output format for reports which is
              defined globally by the report/output_format setting in
              lvm.conf(5).  basic is the original format with columns
              and rows.  If there is more than one report per command,
              each report is prefixed with the report name for
              identification. json produces report output in JSON
              format. See lvmreport(7) for more information.

       -t|--test
              Run in test mode. Commands will not update metadata.  This
              is implemented by disabling all metadata writing but
              nevertheless returning success to the calling function.
              This may lead to unusual error messages in multi-stage
              operations if a tool relies on reading back metadata it
              believes has changed but hasn't.

       -v|--verbose ...
              Set verbose level. Repeat from 1 to 4 times to increase
              the detail of messages sent to stdout and stderr.

       --version
              Display version information.

       -y|--yes
              Do not prompt for confirmation interactively but always
              assume the answer yes. Use with extreme caution.  (For
              automatic no, see -qq.)

Переменные (Variables)

VG Volume Group name. See lvm(8) for valid names.

PV Physical Volume name, a device path under /dev. For commands managing physical extents, a PV positional arg generally accepts a suffix indicating a range (or multiple ranges) of physical extents (PEs). When the first PE is omitted, it defaults to the start of the device, and when the last PE is omitted it defaults to end. Start and end range (inclusive): PV[:PE-PE]... Start and length range (counting from 0): PV[:PE+PE]...

String See the option description for information about the string content.

Size[UNIT] Size is an input number that accepts an optional unit. Input units are always treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit is specified by letter, followed by |UNIT. UNIT represents other possible input units: b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB. (This should not be confused with the output control --units, where capital letters mean multiple of 1000.)

Переменные окружения (Environment variables)

See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can generally be substituted for a required VG parameter.

Смотри также (See also)

lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),

pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8),

vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),

lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),

lvm-fullreport(8), lvm-lvpoll(8), lvm2-activation-generator(8), blkdeactivate(8), lvmdump(8),

dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),

lvmsystemid(7), lvmreport(7), lvmraid(7), lvmthin(7), lvmcache(7)

Исходный текст на man7.org

vgreduce ( 8 )