---

   clone    ( 2 )

---

Имя (Name)

clone, __clone2, clone3 - create a child process

Синопсис (Synopsis)

/* Prototype for the glibc wrapper function */

#define _GNU_SOURCE #include <sched.h>

int clone(int (*fn)(void *), void *stack, int flags, void *arg, ... /* pid_t *parent_tid, void *tls, pid_t *child_tid */ );

/* For the prototype of the raw clone() system call, see NOTES */

#include <linux/sched.h> /* Definition of struct clone_args */ #include <sched.h> /* Definition of CLONE_* constants */ #include <sys/syscall.h> /* Definition of SYS_* constants */ #include <unistd.h>

long syscall(SYS_clone3, struct clone_args *cl_args, size_t size);

Note: glibc provides no wrapper for clone3(), necessitating the use of syscall(2).

Описание (Description)

These system calls create a new ("child") process, in a manner similar to fork(2).

By contrast with fork(2), these system calls provide more precise control over what pieces of execution context are shared between the calling process and the child process. For example, using these system calls, the caller can control whether or not the two processes share the virtual address space, the table of file descriptors, and the table of signal handlers. These system calls also allow the new child process to be placed in separate namespaces(7).

Note that in this manual page, "calling process" normally corresponds to "parent process". But see the descriptions of CLONE_PARENT and CLONE_THREAD below.

This page describes the following interfaces:

* The glibc clone() wrapper function and the underlying system call on which it is based. The main text describes the wrapper function; the differences for the raw system call are described toward the end of this page.

* The newer clone3() system call.

In the remainder of this page, the terminology "the clone call" is used when noting details that apply to all of these interfaces,

The clone() wrapper function When the child process is created with the clone() wrapper function, it commences execution by calling the function pointed to by the argument fn. (This differs from fork(2), where execution continues in the child from the point of the fork(2) call.) The arg argument is passed as the argument of the function fn.

When the fn(arg) function returns, the child process terminates. The integer returned by fn is the exit status for the child process. The child process may also terminate explicitly by calling exit(2) or after receiving a fatal signal.

The stack argument specifies the location of the stack used by the child process. Since the child and calling process may share memory, it is not possible for the child process to execute in the same stack as the calling process. The calling process must therefore set up memory space for the child stack and pass a pointer to this space to clone(). Stacks grow downward on all processors that run Linux (except the HP PA processors), so stack usually points to the topmost address of the memory space set up for the child stack. Note that clone() does not provide a means whereby the caller can inform the kernel of the size of the stack area.

The remaining arguments to clone() are discussed below.

clone3() The clone3() system call provides a superset of the functionality of the older clone() interface. It also provides a number of API improvements, including: space for additional flags bits; cleaner separation in the use of various arguments; and the ability to specify the size of the child's stack area.

As with fork(2), clone3() returns in both the parent and the child. It returns 0 in the child process and returns the PID of the child in the parent.

The cl_args argument of clone3() is a structure of the following form:

struct clone_args { u64 flags; /* Flags bit mask */ u64 pidfd; /* Where to store PID file descriptor (int *) */ u64 child_tid; /* Where to store child TID, in child's memory (pid_t *) */ u64 parent_tid; /* Where to store child TID, in parent's memory (pid_t *) */ u64 exit_signal; /* Signal to deliver to parent on child termination */ u64 stack; /* Pointer to lowest byte of stack */ u64 stack_size; /* Size of stack */ u64 tls; /* Location of new TLS */ u64 set_tid; /* Pointer to a pid_t array (since Linux 5.5) */ u64 set_tid_size; /* Number of elements in set_tid (since Linux 5.5) */ u64 cgroup; /* File descriptor for target cgroup of child (since Linux 5.7) */ };

The size argument that is supplied to clone3() should be initialized to the size of this structure. (The existence of the size argument permits future extensions to the clone_args structure.)

The stack for the child process is specified via cl_args.stack, which points to the lowest byte of the stack area, and cl_args.stack_size, which specifies the size of the stack in bytes. In the case where the CLONE_VM flag (see below) is specified, a stack must be explicitly allocated and specified. Otherwise, these two fields can be specified as NULL and 0, which causes the child to use the same stack area as the parent (in the child's own virtual address space).

The remaining fields in the cl_args argument are discussed below.

Equivalence between clone() and clone3() arguments Unlike the older clone() interface, where arguments are passed individually, in the newer clone3() interface the arguments are packaged into the clone_args structure shown above. This structure allows for a superset of the information passed via the clone() arguments.

The following table shows the equivalence between the arguments of clone() and the fields in the clone_args argument supplied to clone3():

clone() clone3() Notes cl_args field flags & ~0xff flags For most flags; details below parent_tid pidfd See CLONE_PIDFD child_tid child_tid See CLONE_CHILD_SETTID parent_tid parent_tid See CLONE_PARENT_SETTID flags & 0xff exit_signal stack stack --- stack_size tls tls See CLONE_SETTLS --- set_tid See below for details --- set_tid_size --- cgroup See CLONE_INTO_CGROUP

The child termination signal When the child process terminates, a signal may be sent to the parent. The termination signal is specified in the low byte of flags (clone()) or in cl_args.exit_signal (clone3()). If this signal is specified as anything other than SIGCHLD, then the parent process must specify the __WALL or __WCLONE options when waiting for the child with wait(2). If no signal (i.e., zero) is specified, then the parent process is not signaled when the child terminates.

The set_tid array By default, the kernel chooses the next sequential PID for the new process in each of the PID namespaces where it is present. When creating a process with clone3(), the set_tid array (available since Linux 5.5) can be used to select specific PIDs for the process in some or all of the PID namespaces where it is present. If the PID of the newly created process should be set only for the current PID namespace or in the newly created PID namespace (if flags contains CLONE_NEWPID) then the first element in the set_tid array has to be the desired PID and set_tid_size needs to be 1.

If the PID of the newly created process should have a certain value in multiple PID namespaces, then the set_tid array can have multiple entries. The first entry defines the PID in the most deeply nested PID namespace and each of the following entries contains the PID in the corresponding ancestor PID namespace. The number of PID namespaces in which a PID should be set is defined by set_tid_size which cannot be larger than the number of currently nested PID namespaces.

To create a process with the following PIDs in a PID namespace hierarchy:

PID NS level Requested PID Notes

0 31496 Outermost PID namespace 1 42 2 7 Innermost PID namespace

Set the array to:

set_tid[0] = 7; set_tid[1] = 42; set_tid[2] = 31496; set_tid_size = 3;

If only the PIDs in the two innermost PID namespaces need to be specified, set the array to:

set_tid[0] = 7; set_tid[1] = 42; set_tid_size = 2;

The PID in the PID namespaces outside the two innermost PID namespaces is selected the same way as any other PID is selected.

The set_tid feature requires CAP_SYS_ADMIN or (since Linux 5.9) CAP_CHECKPOINT_RESTORE in all owning user namespaces of the target PID namespaces.

Callers may only choose a PID greater than 1 in a given PID namespace if an init process (i.e., a process with PID 1) already exists in that namespace. Otherwise the PID entry for this PID namespace must be 1.

The flags mask Both clone() and clone3() allow a flags bit mask that modifies their behavior and allows the caller to specify what is shared between the calling process and the child process. This bit mask—the flags argument of clone() or the cl_args.flags field passed to clone3()—is referred to as the flags mask in the remainder of this page.

The flags mask is specified as a bitwise-OR of zero or more of the constants listed below. Except as noted below, these flags are available (and have the same effect) in both clone() and clone3().

CLONE_CHILD_CLEARTID (since Linux 2.5.49) Clear (zero) the child thread ID at the location pointed to by child_tid (clone()) or cl_args.child_tid (clone3()) in child memory when the child exits, and do a wakeup on the futex at that address. The address involved may be changed by the set_tid_address(2) system call. This is used by threading libraries.

CLONE_CHILD_SETTID (since Linux 2.5.49) Store the child thread ID at the location pointed to by child_tid (clone()) or cl_args.child_tid (clone3()) in the child's memory. The store operation completes before the clone call returns control to user space in the child process. (Note that the store operation may not have completed before the clone call returns in the parent process, which is relevant if the CLONE_VM flag is also employed.)

CLONE_CLEAR_SIGHAND (since Linux 5.5) By default, signal dispositions in the child thread are the same as in the parent. If this flag is specified, then all signals that are handled in the parent are reset to their default dispositions (SIG_DFL) in the child.

Specifying this flag together with CLONE_SIGHAND is nonsensical and disallowed.

CLONE_DETACHED (historical) For a while (during the Linux 2.5 development series) there was a CLONE_DETACHED flag, which caused the parent not to receive a signal when the child terminated. Ultimately, the effect of this flag was subsumed under the CLONE_THREAD flag and by the time Linux 2.6.0 was released, this flag had no effect. Starting in Linux 2.6.2, the need to give this flag together with CLONE_THREAD disappeared.

This flag is still defined, but it is usually ignored when calling clone(). However, see the description of CLONE_PIDFD for some exceptions.

CLONE_FILES (since Linux 2.0) If CLONE_FILES is set, the calling process and the child process share the same file descriptor table. Any file descriptor created by the calling process or by the child process is also valid in the other process. Similarly, if one of the processes closes a file descriptor, or changes its associated flags (using the fcntl(2) F_SETFD operation), the other process is also affected. If a process sharing a file descriptor table calls execve(2), its file descriptor table is duplicated (unshared).

If CLONE_FILES is not set, the child process inherits a copy of all file descriptors opened in the calling process at the time of the clone call. Subsequent operations that open or close file descriptors, or change file descriptor flags, performed by either the calling process or the child process do not affect the other process. Note, however, that the duplicated file descriptors in the child refer to the same open file descriptions as the corresponding file descriptors in the calling process, and thus share file offsets and file status flags (see open(2)).

CLONE_FS (since Linux 2.0) If CLONE_FS is set, the caller and the child process share the same filesystem information. This includes the root of the filesystem, the current working directory, and the umask. Any call to chroot(2), chdir(2), or umask(2) performed by the calling process or the child process also affects the other process.

If CLONE_FS is not set, the child process works on a copy of the filesystem information of the calling process at the time of the clone call. Calls to chroot(2), chdir(2), or umask(2) performed later by one of the processes do not affect the other process.

CLONE_INTO_CGROUP (since Linux 5.7) By default, a child process is placed in the same version 2 cgroup as its parent. The CLONE_INTO_CGROUP flag allows the child process to be created in a different version 2 cgroup. (Note that CLONE_INTO_CGROUP has effect only for version 2 cgroups.)

In order to place the child process in a different cgroup, the caller specifies CLONE_INTO_CGROUP in cl_args.flags and passes a file descriptor that refers to a version 2 cgroup in the cl_args.cgroup field. (This file descriptor can be obtained by opening a cgroup v2 directory using either the O_RDONLY or the O_PATH flag.) Note that all of the usual restrictions (described in cgroups(7)) on placing a process into a version 2 cgroup apply.

Among the possible use cases for CLONE_INTO_CGROUP are the following:

* Spawning a process into a cgroup different from the parent's cgroup makes it possible for a service manager to directly spawn new services into dedicated cgroups. This eliminates the accounting jitter that would be caused if the child process was first created in the same cgroup as the parent and then moved into the target cgroup. Furthermore, spawning the child process directly into a target cgroup is significantly cheaper than moving the child process into the target cgroup after it has been created.

* The CLONE_INTO_CGROUP flag also allows the creation of frozen child processes by spawning them into a frozen cgroup. (See cgroups(7) for a description of the freezer controller.)

* For threaded applications (or even thread implementations which make use of cgroups to limit individual threads), it is possible to establish a fixed cgroup layout before spawning each thread directly into its target cgroup.

CLONE_IO (since Linux 2.6.25) If CLONE_IO is set, then the new process shares an I/O context with the calling process. If this flag is not set, then (as with fork(2)) the new process has its own I/O context.

The I/O context is the I/O scope of the disk scheduler (i.e., what the I/O scheduler uses to model scheduling of a process's I/O). If processes share the same I/O context, they are treated as one by the I/O scheduler. As a consequence, they get to share disk time. For some I/O schedulers, if two processes share an I/O context, they will be allowed to interleave their disk access. If several threads are doing I/O on behalf of the same process (aio_read(3), for instance), they should employ CLONE_IO to get better I/O performance.

If the kernel is not configured with the CONFIG_BLOCK option, this flag is a no-op.

CLONE_NEWCGROUP (since Linux 4.6) Create the process in a new cgroup namespace. If this flag is not set, then (as with fork(2)) the process is created in the same cgroup namespaces as the calling process.

For further information on cgroup namespaces, see cgroup_namespaces(7).

Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWCGROUP.

CLONE_NEWIPC (since Linux 2.6.19) If CLONE_NEWIPC is set, then create the process in a new IPC namespace. If this flag is not set, then (as with fork(2)), the process is created in the same IPC namespace as the calling process.

For further information on IPC namespaces, see ipc_namespaces(7).

Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWIPC. This flag can't be specified in conjunction with CLONE_SYSVSEM.

CLONE_NEWNET (since Linux 2.6.24) (The implementation of this flag was completed only by about kernel version 2.6.29.)

If CLONE_NEWNET is set, then create the process in a new network namespace. If this flag is not set, then (as with fork(2)) the process is created in the same network namespace as the calling process.

For further information on network namespaces, see network_namespaces(7).

Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWNET.

CLONE_NEWNS (since Linux 2.4.19) If CLONE_NEWNS is set, the cloned child is started in a new mount namespace, initialized with a copy of the namespace of the parent. If CLONE_NEWNS is not set, the child lives in the same mount namespace as the parent.

For further information on mount namespaces, see namespaces(7) and mount_namespaces(7).

Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWNS. It is not permitted to specify both CLONE_NEWNS and CLONE_FS in the same clone call.

CLONE_NEWPID (since Linux 2.6.24) If CLONE_NEWPID is set, then create the process in a new PID namespace. If this flag is not set, then (as with fork(2)) the process is created in the same PID namespace as the calling process.

For further information on PID namespaces, see namespaces(7) and pid_namespaces(7).

Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWPID. This flag can't be specified in conjunction with CLONE_THREAD or CLONE_PARENT.

CLONE_NEWUSER (This flag first became meaningful for clone() in Linux 2.6.23, the current clone() semantics were merged in Linux 3.5, and the final pieces to make the user namespaces completely usable were merged in Linux 3.8.)

If CLONE_NEWUSER is set, then create the process in a new user namespace. If this flag is not set, then (as with fork(2)) the process is created in the same user namespace as the calling process.

For further information on user namespaces, see namespaces(7) and user_namespaces(7).

Before Linux 3.8, use of CLONE_NEWUSER required that the caller have three capabilities: CAP_SYS_ADMIN, CAP_SETUID, and CAP_SETGID. Starting with Linux 3.8, no privileges are needed to create a user namespace.

This flag can't be specified in conjunction with CLONE_THREAD or CLONE_PARENT. For security reasons, CLONE_NEWUSER cannot be specified in conjunction with CLONE_FS.

CLONE_NEWUTS (since Linux 2.6.19) If CLONE_NEWUTS is set, then create the process in a new UTS namespace, whose identifiers are initialized by duplicating the identifiers from the UTS namespace of the calling process. If this flag is not set, then (as with fork(2)) the process is created in the same UTS namespace as the calling process.

For further information on UTS namespaces, see uts_namespaces(7).

Only a privileged process (CAP_SYS_ADMIN) can employ CLONE_NEWUTS.

CLONE_PARENT (since Linux 2.3.12) If CLONE_PARENT is set, then the parent of the new child (as returned by getppid(2)) will be the same as that of the calling process.

If CLONE_PARENT is not set, then (as with fork(2)) the child's parent is the calling process.

Note that it is the parent process, as returned by getppid(2), which is signaled when the child terminates, so that if CLONE_PARENT is set, then the parent of the calling process, rather than the calling process itself, is signaled.

The CLONE_PARENT flag can't be used in clone calls by the global init process (PID 1 in the initial PID namespace) and init processes in other PID namespaces. This restriction prevents the creation of multi-rooted process trees as well as the creation of unreapable zombies in the initial PID namespace.

CLONE_PARENT_SETTID (since Linux 2.5.49) Store the child thread ID at the location pointed to by parent_tid (clone()) or cl_args.parent_tid (clone3()) in the parent's memory. (In Linux 2.5.32-2.5.48 there was a flag CLONE_SETTID that did this.) The store operation completes before the clone call returns control to user space.

CLONE_PID (Linux 2.0 to 2.5.15) If CLONE_PID is set, the child process is created with the same process ID as the calling process. This is good for hacking the system, but otherwise of not much use. From Linux 2.3.21 onward, this flag could be specified only by the system boot process (PID 0). The flag disappeared completely from the kernel sources in Linux 2.5.16. Subsequently, the kernel silently ignored this bit if it was specified in the flags mask. Much later, the same bit was recycled for use as the CLONE_PIDFD flag.

CLONE_PIDFD (since Linux 5.2) If this flag is specified, a PID file descriptor referring to the child process is allocated and placed at a specified location in the parent's memory. The close-on- exec flag is set on this new file descriptor. PID file descriptors can be used for the purposes described in pidfd_open(2).

* When using clone3(), the PID file descriptor is placed at the location pointed to by cl_args.pidfd.

* When using clone(), the PID file descriptor is placed at the location pointed to by parent_tid. Since the parent_tid argument is used to return the PID file descriptor, CLONE_PIDFD cannot be used with CLONE_PARENT_SETTID when calling clone().

It is currently not possible to use this flag together with CLONE_THREAD. This means that the process identified by the PID file descriptor will always be a thread group leader.

If the obsolete CLONE_DETACHED flag is specified alongside CLONE_PIDFD when calling clone(), an error is returned. An error also results if CLONE_DETACHED is specified when calling clone3(). This error behavior ensures that the bit corresponding to CLONE_DETACHED can be reused for further PID file descriptor features in the future.

CLONE_PTRACE (since Linux 2.2) If CLONE_PTRACE is specified, and the calling process is being traced, then trace the child also (see ptrace(2)).

CLONE_SETTLS (since Linux 2.5.32) The TLS (Thread Local Storage) descriptor is set to tls.

The interpretation of tls and the resulting effect is architecture dependent. On x86, tls is interpreted as a struct user_desc * (see set_thread_area(2)). On x86-64 it is the new value to be set for the %fs base register (see the ARCH_SET_FS argument to arch_prctl(2)). On architectures with a dedicated TLS register, it is the new value of that register.

Use of this flag requires detailed knowledge and generally it should not be used except in libraries implementing threading.

CLONE_SIGHAND (since Linux 2.0) If CLONE_SIGHAND is set, the calling process and the child process share the same table of signal handlers. If the calling process or child process calls sigaction(2) to change the behavior associated with a signal, the behavior is changed in the other process as well. However, the calling process and child processes still have distinct signal masks and sets of pending signals. So, one of them may block or unblock signals using sigprocmask(2) without affecting the other process.

If CLONE_SIGHAND is not set, the child process inherits a copy of the signal handlers of the calling process at the time of the clone call. Calls to sigaction(2) performed later by one of the processes have no effect on the other process.

Since Linux 2.6.0, the flags mask must also include CLONE_VM if CLONE_SIGHAND is specified.

CLONE_STOPPED (since Linux 2.6.0) If CLONE_STOPPED is set, then the child is initially stopped (as though it was sent a SIGSTOP signal), and must be resumed by sending it a SIGCONT signal.

This flag was deprecated from Linux 2.6.25 onward, and was removed altogether in Linux 2.6.38. Since then, the kernel silently ignores it without error. Starting with Linux 4.6, the same bit was reused for the CLONE_NEWCGROUP flag.

CLONE_SYSVSEM (since Linux 2.5.10) If CLONE_SYSVSEM is set, then the child and the calling process share a single list of System V semaphore adjustment (semadj) values (see semop(2)). In this case, the shared list accumulates semadj values across all processes sharing the list, and semaphore adjustments are performed only when the last process that is sharing the list terminates (or ceases sharing the list using unshare(2)). If this flag is not set, then the child has a separate semadj list that is initially empty.

CLONE_THREAD (since Linux 2.4.0) If CLONE_THREAD is set, the child is placed in the same thread group as the calling process. To make the remainder of the discussion of CLONE_THREAD more readable, the term "thread" is used to refer to the processes within a thread group.

Thread groups were a feature added in Linux 2.4 to support the POSIX threads notion of a set of threads that share a single PID. Internally, this shared PID is the so-called thread group identifier (TGID) for the thread group. Since Linux 2.4, calls to getpid(2) return the TGID of the caller.

The threads within a group can be distinguished by their (system-wide) unique thread IDs (TID). A new thread's TID is available as the function result returned to the caller, and a thread can obtain its own TID using gettid(2).

When a clone call is made without specifying CLONE_THREAD, then the resulting thread is placed in a new thread group whose TGID is the same as the thread's TID. This thread is the leader of the new thread group.

A new thread created with CLONE_THREAD has the same parent process as the process that made the clone call (i.e., like CLONE_PARENT), so that calls to getppid(2) return the same value for all of the threads in a thread group. When a CLONE_THREAD thread terminates, the thread that created it is not sent a SIGCHLD (or other termination) signal; nor can the status of such a thread be obtained using wait(2). (The thread is said to be detached.)

After all of the threads in a thread group terminate the parent process of the thread group is sent a SIGCHLD (or other termination) signal.

If any of the threads in a thread group performs an execve(2), then all threads other than the thread group leader are terminated, and the new program is executed in the thread group leader.

If one of the threads in a thread group creates a child using fork(2), then any thread in the group can wait(2) for that child.

Since Linux 2.5.35, the flags mask must also include CLONE_SIGHAND if CLONE_THREAD is specified (and note that, since Linux 2.6.0, CLONE_SIGHAND also requires CLONE_VM to be included).

Signal dispositions and actions are process-wide: if an unhandled signal is delivered to a thread, then it will affect (terminate, stop, continue, be ignored in) all members of the thread group.

Each thread has its own signal mask, as set by sigprocmask(2).

A signal may be process-directed or thread-directed. A process-directed signal is targeted at a thread group (i.e., a TGID), and is delivered to an arbitrarily selected thread from among those that are not blocking the signal. A signal may be process-directed because it was generated by the kernel for reasons other than a hardware exception, or because it was sent using kill(2) or sigqueue(3). A thread-directed signal is targeted at (i.e., delivered to) a specific thread. A signal may be thread directed because it was sent using tgkill(2) or pthread_sigqueue(3), or because the thread executed a machine language instruction that triggered a hardware exception (e.g., invalid memory access triggering SIGSEGV or a floating-point exception triggering SIGFPE).

A call to sigpending(2) returns a signal set that is the union of the pending process-directed signals and the signals that are pending for the calling thread.

If a process-directed signal is delivered to a thread group, and the thread group has installed a handler for the signal, then the handler is invoked in exactly one, arbitrarily selected member of the thread group that has not blocked the signal. If multiple threads in a group are waiting to accept the same signal using sigwaitinfo(2), the kernel will arbitrarily select one of these threads to receive the signal.

CLONE_UNTRACED (since Linux 2.5.46) If CLONE_UNTRACED is specified, then a tracing process cannot force CLONE_PTRACE on this child process.

CLONE_VFORK (since Linux 2.2) If CLONE_VFORK is set, the execution of the calling process is suspended until the child releases its virtual memory resources via a call to execve(2) or _exit(2) (as with vfork(2)).

If CLONE_VFORK is not set, then both the calling process and the child are schedulable after the call, and an application should not rely on execution occurring in any particular order.

CLONE_VM (since Linux 2.0) If CLONE_VM is set, the calling process and the child process run in the same memory space. In particular, memory writes performed by the calling process or by the child process are also visible in the other process. Moreover, any memory mapping or unmapping performed with mmap(2) or munmap(2) by the child or calling process also affects the other process.

If CLONE_VM is not set, the child process runs in a separate copy of the memory space of the calling process at the time of the clone call. Memory writes or file mappings/unmappings performed by one of the processes do not affect the other, as with fork(2).

If the CLONE_VM flag is specified and the CLONE_VFORK flag is not specified, then any alternate signal stack that was established by sigaltstack(2) is cleared in the child process.