Путеводитель по Руководству Linux

  User  |  Syst  |  Libr  |  Device  |  Files  |  Other  |  Admin  |  Head  |



   fcntl.3p    ( 3 )

файловый контроль (file control)

Описание (Description)

The fcntl() function shall perform the operations described below
       on open files. The fildes argument is a file descriptor.

The available values for cmd are defined in <fcntl.h> and are as follows:

F_DUPFD Return a new file descriptor which shall be allocated as described in Section 2.14, File Descriptor Allocation, except that it shall be the lowest numbered available file descriptor greater than or equal to the third argument, arg, taken as an integer of type int. The new file descriptor shall refer to the same open file description as the original file descriptor, and shall share any locks. The FD_CLOEXEC flag associated with the new file descriptor shall be cleared to keep the file open across calls to one of the exec functions.

F_DUPFD_CLOEXEC Like F_DUPFD, but the FD_CLOEXEC flag associated with the new file descriptor shall be set.

F_GETFD Get the file descriptor flags defined in <fcntl.h> that are associated with the file descriptor fildes. File descriptor flags are associated with a single file descriptor and do not affect other file descriptors that refer to the same file.

F_SETFD Set the file descriptor flags defined in <fcntl.h>, that are associated with fildes, to the third argument, arg, taken as type int. If the FD_CLOEXEC flag in the third argument is 0, the file descriptor shall remain open across the exec functions; otherwise, the file descriptor shall be closed upon successful execution of one of the exec functions.

F_GETFL Get the file status flags and file access modes, defined in <fcntl.h>, for the file description associated with fildes. The file access modes can be extracted from the return value using the mask O_ACCMODE, which is defined in <fcntl.h>. File status flags and file access modes are associated with the file description and do not affect other file descriptors that refer to the same file with different open file descriptions. The flags returned may include non-standard file status flags which the application did not set, provided that these additional flags do not alter the behavior of a conforming application.

F_SETFL Set the file status flags, defined in <fcntl.h>, for the file description associated with fildes from the corresponding bits in the third argument, arg, taken as type int. Bits corresponding to the file access mode and the file creation flags, as defined in <fcntl.h>, that are set in arg shall be ignored. If any bits in arg other than those mentioned here are changed by the application, the result is unspecified. If fildes does not support non-blocking operations, it is unspecified whether the O_NONBLOCK flag will be ignored.

F_GETOWN If fildes refers to a socket, get the process ID or process group ID specified to receive SIGURG signals when out-of-band data is available. Positive values shall indicate a process ID; negative values, other than -1, shall indicate a process group ID; the value zero shall indicate that no SIGURG signals are to be sent. If fildes does not refer to a socket, the results are unspecified.

F_SETOWN If fildes refers to a socket, set the process ID or process group ID specified to receive SIGURG signals when out-of-band data is available, using the value of the third argument, arg, taken as type int. Positive values shall indicate a process ID; negative values, other than -1, shall indicate a process group ID; the value zero shall indicate that no SIGURG signals are to be sent. Each time a SIGURG signal is sent to the specified process or process group, permission checks equivalent to those performed by kill() shall be performed, as if kill() were called by a process with the same real user ID, effective user ID, and privileges that the process calling fcntl() has at the time of the call; if the kill() call would fail, no signal shall be sent. These permission checks may also be performed by the fcntl() call. If the process specified by arg later terminates, or the process group specified by arg later becomes empty, while still being specified to receive SIGURG signals when out-of-band data is available from fildes, then no signals shall be sent to any subsequently created process that has the same process ID or process group ID, regardless of permission; it is unspecified whether this is achieved by the equivalent of a fcntl(fildes, F_SETOWN, 0) call at the time the process terminates or is waited for or the process group becomes empty, or by other means. If fildes does not refer to a socket, the results are unspecified.

The following values for cmd are available for advisory record locking. Record locking shall be supported for regular files, and may be supported for other files.

F_GETLK Get any lock which blocks the lock description pointed to by the third argument, arg, taken as a pointer to type struct flock, defined in <fcntl.h>. The information retrieved shall overwrite the information passed to fcntl() in the structure flock. If no lock is found that would prevent this lock from being created, then the structure shall be left unchanged except for the lock type which shall be set to F_UNLCK.

F_SETLK Set or clear a file segment lock according to the lock description pointed to by the third argument, arg, taken as a pointer to type struct flock, defined in <fcntl.h>. F_SETLK can establish shared (or read) locks (F_RDLCK) or exclusive (or write) locks (F_WRLCK), as well as to remove either type of lock (F_UNLCK). F_RDLCK, F_WRLCK, and F_UNLCK are defined in <fcntl.h>. If a shared or exclusive lock cannot be set, fcntl() shall return immediately with a return value of -1.

F_SETLKW This command shall be equivalent to F_SETLK except that if a shared or exclusive lock is blocked by other locks, the thread shall wait until the request can be satisfied. If a signal that is to be caught is received while fcntl() is waiting for a region, fcntl() shall be interrupted. Upon return from the signal handler, fcntl() shall return -1 with errno set to [EINTR], and the lock operation shall not be done.

Additional implementation-defined values for cmd may be defined in <fcntl.h>. Their names shall start with F_.

When a shared lock is set on a segment of a file, other processes shall be able to set shared locks on that segment or a portion of it. A shared lock prevents any other process from setting an exclusive lock on any portion of the protected area. A request for a shared lock shall fail if the file descriptor was not opened with read access.

An exclusive lock shall prevent any other process from setting a shared lock or an exclusive lock on any portion of the protected area. A request for an exclusive lock shall fail if the file descriptor was not opened with write access.

The structure flock describes the type (l_type), starting offset (l_whence), relative offset (l_start), size (l_len), and process ID (l_pid) of the segment of the file to be affected.

The value of l_whence is SEEK_SET, SEEK_CUR, or SEEK_END, to indicate that the relative offset l_start bytes shall be measured from the start of the file, current position, or end of the file, respectively. The value of l_len is the number of consecutive bytes to be locked. The value of l_len may be negative (where the definition of off_t permits negative values of l_len). The l_pid field is only used with F_GETLK to return the process ID of the process holding a blocking lock. After a successful F_GETLK request, when a blocking lock is found, the values returned in the flock structure shall be as follows:

l_type Type of blocking lock found.

l_whence SEEK_SET.

l_start Start of the blocking lock.

l_len Length of the blocking lock.

l_pid Process ID of the process that holds the blocking lock.

If the command is F_SETLKW and the process must wait for another process to release a lock, then the range of bytes to be locked shall be determined before the fcntl() function blocks. If the file size or file descriptor seek offset change while fcntl() is blocked, this shall not affect the range of bytes locked.

If l_len is positive, the area affected shall start at l_start and end at l_start+l_len-1. If l_len is negative, the area affected shall start at l_start+l_len and end at l_start-1. Locks may start and extend beyond the current end of a file, but shall not extend before the beginning of the file. A lock shall be set to extend to the largest possible value of the file offset for that file by setting l_len to 0. If such a lock also has l_start set to 0 and l_whence is set to SEEK_SET, the whole file shall be locked.

There shall be at most one type of lock set for each byte in the file. Before a successful return from an F_SETLK or an F_SETLKW request when the calling process has previously existing locks on bytes in the region specified by the request, the previous lock type for each byte in the specified region shall be replaced by the new lock type. As specified above under the descriptions of shared locks and exclusive locks, an F_SETLK or an F_SETLKW request (respectively) shall fail or block when another process has existing locks on bytes in the specified region and the type of any of those locks conflicts with the type specified in the request.

All locks associated with a file for a given process shall be removed when a file descriptor for that file is closed by that process or the process holding that file descriptor terminates. Locks are not inherited by a child process.

A potential for deadlock occurs if a process controlling a locked region is put to sleep by attempting to lock the locked region of another process. If the system detects that sleeping until a locked region is unlocked would cause a deadlock, fcntl() shall fail with an [EDEADLK] error.

An unlock (F_UNLCK) request in which l_len is non-zero and the offset of the last byte of the requested segment is the maximum value for an object of type off_t, when the process has an existing lock in which l_len is 0 and which includes the last byte of the requested segment, shall be treated as a request to unlock from the start of the requested segment with an l_len equal to 0. Otherwise, an unlock (F_UNLCK) request shall attempt to unlock only the requested segment.

When the file descriptor fildes refers to a shared memory object, the behavior of fcntl() shall be the same as for a regular file except the effect of the following values for the argument cmd shall be unspecified: F_SETFL, F_GETLK, F_SETLK, and F_SETLKW.

If fildes refers to a typed memory object, the result of the fcntl() function is unspecified.