добавить или проанализировать структурированную информацию в сообщениях фиксации (Add or parse structured information in commit messages)
Имя (Name)
git-interpret-trailers - Add or parse structured information in
commit messages
Синопсис (Synopsis)
git interpret-trailers [<options>] [(--trailer <token>[(=|:)<value>])...] [<file>...]
git interpret-trailers [<options>] [--parse] [<file>...]
Описание (Description)
Help parsing or adding trailers lines, that look similar to RFC
822 e-mail headers, at the end of the otherwise free-form part of
a commit message.
This command reads some patches or commit messages from either
the <file> arguments or the standard input if no <file> is
specified. If --parse is specified, the output consists of the
parsed trailers.
Otherwise, this command applies the arguments passed using the
--trailer option, if any, to the commit message part of each
input file. The result is emitted on the standard output.
Some configuration variables control the way the --trailer
arguments are applied to each commit message and the way any
existing trailer in the commit message is changed. They also make
it possible to automatically add some trailers.
By default, a <token>=<value> or <token>:<value> argument given
using --trailer will be appended after the existing trailers only
if the last trailer has a different (<token>, <value>) pair (or
if there is no existing trailer). The <token> and <value> parts
will be trimmed to remove starting and trailing whitespace, and
the resulting trimmed <token> and <value> will appear in the
message like this:
token: value
This means that the trimmed <token> and <value> will be separated
by ': ' (one colon followed by one space).
By default the new trailer will appear at the end of all the
existing trailers. If there is no existing trailer, the new
trailer will appear after the commit message part of the output,
and, if there is no line with only spaces at the end of the
commit message part, one blank line will be added before the new
trailer.
Existing trailers are extracted from the input message by looking
for a group of one or more lines that (i) is all trailers, or
(ii) contains at least one Git-generated or user-configured
trailer and consists of at least 25% trailers. The group must be
preceded by one or more empty (or whitespace-only) lines. The
group must either be at the end of the message or be the last
non-whitespace lines before a line that starts with --- (followed
by a space or the end of the line). Such three minus signs start
the patch part of the message. See also --no-divider below.
When reading trailers, there can be whitespaces after the token,
the separator and the value. There can also be whitespaces inside
the token and the value. The value may be split over multiple
lines with each subsequent line starting with whitespace, like
the "folding" in RFC 822.
Note that trailers do not follow and are not intended to follow
many rules for RFC 822 headers. For example they do not follow
the encoding rules and probably many other rules.
Параметры (Options)
--in-place
Edit the files in place.
--trim-empty
If the <value> part of any trailer contains only whitespace,
the whole trailer will be removed from the resulting message.
This applies to existing trailers as well as new trailers.
--trailer <token>[(=|:)<value>]
Specify a (<token>, <value>) pair that should be applied as a
trailer to the input messages. See the description of this
command.
--where <placement>, --no-where
Specify where all new trailers will be added. A setting
provided with --where overrides all configuration variables
and applies to all --trailer options until the next
occurrence of --where or --no-where. Possible values are
after, before, end or start.
--if-exists <action>, --no-if-exists
Specify what action will be performed when there is already
at least one trailer with the same <token> in the message. A
setting provided with --if-exists overrides all configuration
variables and applies to all --trailer options until the next
occurrence of --if-exists or --no-if-exists. Possible actions
are addIfDifferent, addIfDifferentNeighbor, add, replace and
doNothing.
--if-missing <action>, --no-if-missing
Specify what action will be performed when there is no other
trailer with the same <token> in the message. A setting
provided with --if-missing overrides all configuration
variables and applies to all --trailer options until the next
occurrence of --if-missing or --no-if-missing. Possible
actions are doNothing or add.
--only-trailers
Output only the trailers, not any other parts of the input.
--only-input
Output only trailers that exist in the input; do not add any
from the command-line or by following configured trailer.*
rules.
--unfold
Remove any whitespace-continuation in trailers, so that each
trailer appears on a line by itself with its full content.
--parse
A convenience alias for --only-trailers --only-input
--unfold.
--no-divider
Do not treat --- as the end of the commit message. Use this
when you know your input contains just the commit message
itself (and not an email or the output of git format-patch).
Конфигурационные переменные (Configuration variables)
trailer.separators
This option tells which characters are recognized as trailer
separators. By default only : is recognized as a trailer
separator, except that = is always accepted on the command
line for compatibility with other git commands.
The first character given by this option will be the default
character used when another separator is not specified in the
config for this trailer.
For example, if the value for this option is "%=$", then only
lines using the format <token><sep><value> with <sep>
containing %, = or $ and then spaces will be considered
trailers. And % will be the default separator used, so by
default trailers will appear like: <token>% <value> (one
percent sign and one space will appear between the token and
the value).
trailer.where
This option tells where a new trailer will be added.
This can be end, which is the default, start, after or
before.
If it is end, then each new trailer will appear at the end of
the existing trailers.
If it is start, then each new trailer will appear at the
start, instead of the end, of the existing trailers.
If it is after, then each new trailer will appear just after
the last trailer with the same <token>.
If it is before, then each new trailer will appear just
before the first trailer with the same <token>.
trailer.ifexists
This option makes it possible to choose what action will be
performed when there is already at least one trailer with the
same <token> in the message.
The valid values for this option are: addIfDifferentNeighbor
(this is the default), addIfDifferent, add, replace or
doNothing.
With addIfDifferentNeighbor, a new trailer will be added only
if no trailer with the same (<token>, <value>) pair is above
or below the line where the new trailer will be added.
With addIfDifferent, a new trailer will be added only if no
trailer with the same (<token>, <value>) pair is already in
the message.
With add, a new trailer will be added, even if some trailers
with the same (<token>, <value>) pair are already in the
message.
With replace, an existing trailer with the same <token> will
be deleted and the new trailer will be added. The deleted
trailer will be the closest one (with the same <token>) to
the place where the new one will be added.
With doNothing, nothing will be done; that is no new trailer
will be added if there is already one with the same <token>
in the message.
trailer.ifmissing
This option makes it possible to choose what action will be
performed when there is not yet any trailer with the same
<token> in the message.
The valid values for this option are: add (this is the
default) and doNothing.
With add, a new trailer will be added.
With doNothing, nothing will be done.
trailer.<token>.key
This key will be used instead of <token> in the trailer. At
the end of this key, a separator can appear and then some
space characters. By default the only valid separator is :,
but this can be changed using the trailer.separators config
variable.
If there is a separator, then the key will be used instead of
both the <token> and the default separator when adding the
trailer.
trailer.<token>.where
This option takes the same values as the trailer.where
configuration variable and it overrides what is specified by
that option for trailers with the specified <token>.
trailer.<token>.ifexists
This option takes the same values as the trailer.ifexists
configuration variable and it overrides what is specified by
that option for trailers with the specified <token>.
trailer.<token>.ifmissing
This option takes the same values as the trailer.ifmissing
configuration variable and it overrides what is specified by
that option for trailers with the specified <token>.
trailer.<token>.command
This option behaves in the same way as trailer.<token>.cmd,
except that it doesn't pass anything as argument to the
specified command. Instead the first occurrence of substring
$ARG is replaced by the value that would be passed as
argument.
The trailer.<token>.command option has been deprecated in
favor of trailer.<token>.cmd due to the fact that $ARG in the
user's command is only replaced once and that the original
way of replacing $ARG is not safe.
When both trailer.<token>.cmd and trailer.<token>.command are
given for the same <token>, trailer.<token>.cmd is used and
trailer.<token>.command is ignored.
trailer.<token>.cmd
This option can be used to specify a shell command that will
be called: once to automatically add a trailer with the
specified <token>, and then each time a --trailer
<token>=<value> argument to modify the <value> of the trailer
that this option would produce.
When the specified command is first called to add a trailer
with the specified <token>, the behavior is as if a special
--trailer <token>=<value> argument was added at the beginning
of the "git interpret-trailers" command, where <value> is
taken to be the standard output of the command with any
leading and trailing whitespace trimmed off.
If some --trailer <token>=<value> arguments are also passed
on the command line, the command is called again once for
each of these arguments with the same <token>. And the
<value> part of these arguments, if any, will be passed to
the command as its first argument. This way the command can
produce a <value> computed from the <value> passed in the
--trailer <token>=<value> argument.
Примеры (Examples)
• Configure a sign trailer with a Signed-off-by key, and then
add two of these trailers to a message:
$ git config trailer.sign.key "Signed-off-by"
$ cat msg.txt
subject
message
$ cat msg.txt | git interpret-trailers --trailer 'sign: Alice <alice@example.com>' --trailer 'sign: Bob <bob@example.com>'
subject
message
Signed-off-by: Alice <alice@example.com>
Signed-off-by: Bob <bob@example.com>
• Use the --in-place option to edit a message file in place:
$ cat msg.txt
subject
message
Signed-off-by: Bob <bob@example.com>
$ git interpret-trailers --trailer 'Acked-by: Alice <alice@example.com>' --in-place msg.txt
$ cat msg.txt
subject
message
Signed-off-by: Bob <bob@example.com>
Acked-by: Alice <alice@example.com>
• Extract the last commit as a patch, and add a Cc and a
Reviewed-by trailer to it:
$ git format-patch -1
0001-foo.patch
$ git interpret-trailers --trailer 'Cc: Alice <alice@example.com>' --trailer 'Reviewed-by: Bob <bob@example.com>' 0001-foo.patch >0001-bar.patch
• Configure a sign trailer with a command to automatically add
a 'Signed-off-by: ' with the author information only if there
is no 'Signed-off-by: ' already, and show how it works:
$ git config trailer.sign.key "Signed-off-by: "
$ git config trailer.sign.ifmissing add
$ git config trailer.sign.ifexists doNothing
$ git config trailer.sign.command 'echo "$(git config user.name) <$(git config user.email)>"'
$ git interpret-trailers <<EOF
> EOF
Signed-off-by: Bob <bob@example.com>
$ git interpret-trailers <<EOF
> Signed-off-by: Alice <alice@example.com>
> EOF
Signed-off-by: Alice <alice@example.com>
• Configure a fix trailer with a key that contains a # and no
space after this character, and show how it works:
$ git config trailer.separators ":#"
$ git config trailer.fix.key "Fix #"
$ echo "subject" | git interpret-trailers --trailer fix=42
subject
Fix #42
• Configure a help trailer with a cmd use a script
glog-find-author which search specified author identity from
git log in git repository and show how it works:
$ cat ~/bin/glog-find-author
#!/bin/sh
test -n "$1" && git log --author="$1" --pretty="%an <%ae>" -1 || true
$ git config trailer.help.key "Helped-by: "
$ git config trailer.help.ifExists "addIfDifferentNeighbor"
$ git config trailer.help.cmd "~/bin/glog-find-author"
$ git interpret-trailers --trailer="help:Junio" --trailer="help:Couder" <<EOF
> subject
>
> message
>
> EOF
subject
message
Helped-by: Junio C Hamano <gitster@pobox.com>
Helped-by: Christian Couder <christian.couder@gmail.com>
• Configure a ref trailer with a cmd use a script glog-grep to
grep last relevant commit from git log in the git repository
and show how it works:
$ cat ~/bin/glog-grep
#!/bin/sh
test -n "$1" && git log --grep "$1" --pretty=reference -1 || true
$ git config trailer.ref.key "Reference-to: "
$ git config trailer.ref.ifExists "replace"
$ git config trailer.ref.cmd "~/bin/glog-grep"
$ git interpret-trailers --trailer="ref:Add copyright notices." <<EOF
> subject
>
> message
>
> EOF
subject
message
Reference-to: 8bc9a0c769 (Add copyright notices., 2005-04-07)
• Configure a see trailer with a command to show the subject of
a commit that is related, and show how it works:
$ git config trailer.see.key "See-also: "
$ git config trailer.see.ifExists "replace"
$ git config trailer.see.ifMissing "doNothing"
$ git config trailer.see.command "git log -1 --oneline --format=\"%h (%s)\" --abbrev-commit --abbrev=14 \$ARG"
$ git interpret-trailers <<EOF
> subject
>
> message
>
> see: HEAD~2
> EOF
subject
message
See-also: fe3187489d69c4 (subject of related commit)
• Configure a commit template with some trailers with empty
values (using sed to show and keep the trailing spaces at the
end of the trailers), then configure a commit-msg hook that
uses git interpret-trailers to remove trailers with empty
values and to add a git-version trailer:
$ sed -e 's/ Z$/ /' >commit_template.txt <<EOF
> ***subject***
>
> ***message***
>
> Fixes: Z
> Cc: Z
> Reviewed-by: Z
> Signed-off-by: Z
> EOF
$ git config commit.template commit_template.txt
$ cat >.git/hooks/commit-msg <<EOF
> #!/bin/sh
> git interpret-trailers --trim-empty --trailer "git-version: \$(git describe)" "\$1" > "\$1.new"
> mv "\$1.new" "\$1"
> EOF
$ chmod +x .git/hooks/commit-msg
Смотри также (See also)
git-commit(1), git-format-patch(1), git-config(1)
