поддержка Intel Ivy Bridge-EP Power Controller Unit (PCU) uncore PMU (support for Intel Ivy Bridge-EP Power Controller Unit (PCU) uncore PMU)
Имя (Name)
libpfm_intel_ivbep_unc_pcu - support for Intel Ivy Bridge-EP
Power Controller Unit (PCU) uncore PMU
Синопсис (Synopsis)
#include <perfmon/pfmlib.h>
PMU name: ivbep_unc_pcu
PMU desc: Intel Ivy Bridge-EP PCU uncore PMU
Описание (Description)
The library supports the Intel Ivy Bridge Power Controller Unit
uncore PMU. This PMU model only exists on Ivy Bridge model 62.
Модификаторы (Modifiers)
The following modifiers are supported on Intel Ivy Bridge PCU
uncore PMU:
e
Enable edge detection, i.e., count only when there is a
state transition from no occurrence of the event to at
least one occurrence. This modifier must be combined with
a threshold modifier (t) with a value greater or equal to
one. This is a boolean modifier.
t
Set the threshold value. When set to a non-zero value, the
counter counts the number of HA cycles in which the number
of occurrences of the event is greater or equal to the
threshold. This is an integer modifier with values in the
range [0:15].
ff
Enable frequency band filtering. This modifier applies
only to the UNC_P_FREQ_BANDx_CYCLES events, where x is
[0-3]. The modifiers expects an integer in the range
[0-255]. The value is interpreted as a frequency value to
be multiplied by 100Mhz. Thus if the value is 32, then all
cycles where the processor is running at 3.2GHz and more
are counted.
Фильтрация частотного диапазона (Frequency band filtering)
There are 3 events which support frequency band filtering,
namely, UNC_P_FREQ_BAND0_CYCLES, UNC_P_FREQ_BAND1_CYCLES,
UNC_P_FREQ_BAND2_CYCLES, UNC_P_FREQ_BAND3_CYCLES. The frequency
filter (available via the ff modifier) is stored into a PMU
shared register which hold all 4 possible frequency bands, one
per event. However, the library generate the encoding for each
event individually because it processes events one at a time. The
caller or the underlying kernel interface may have to merge the
band filter settings to program the filter register properly.