In this situation, D1 gets the puck just inside the blue line and turns it up quickly by passing to LW or C (figure 2.12). This should be the first option for all teams because speed in transition usually results in odd-man rushes, plus the quick-up play does not give the opposition time to set up a trap. RW stretches on the wide side and then supports across the ice when the pass is made.

When D1 gets the puck and the strong-side options are taken away, then he should immediately pass the puck to his partner (figure 2.13). Once the pass is made, D1 should sink back to mid-ice to protect his partner in case of a turnover and also to provide an option for D2. D2 passes up to RW, who is in a stretch position by the far blue line, or to C in mid-ice. Once the pass is made the LW moves to support.

D1 passes to D2, and now the opposition takes away his options to RW and C. D2 passes across to LW, who sinks low into the open seam (figure 2.14). This option is usually available when the opponents forecheck in a 1-2-2 format and lock the center leaving the back side open. When D2 initially gets the pass from D1 he should move up ice and look to make a play up the boards or to the center. This deception will open up the wide side to LW. The pass must be made flat across the ice because a diagonal pass might be intercepted.

D1 passes to D2 and then slides back to mid-ice to support his partner (figure 2.15a). D2 moves up ice and looks to make a pass. With no option available, he passes back to D1, who is behind and in mid-ice. D1 then moves the puck quickly to LW as the primary option or to C. Initially when D1 moves the puck to D2, he has the option to drop back deeper and perform a skating hinge—this is where the supporting defenseman moves back in behind the play and prepares to jump into the hinge pass with speed, catching the opponent off guard. Using the skating hinge also gives this defenseman room to accelerate, time to read the play, and the ability to draw in a checker and move the puck to the best option (figure 2.15b).

When a D1-to-D2 pass is made in the neutral zone, C should support low, but once the puck is passed back to D1 or LW, C should have the option of returning low or moving into the high mid-ice stretch area (figure 2.16) for a potential breakaway pass. If teams check center on center in the neutral zone, this is an effective way to lose your check and split the opponent’s defense.

Because most teams use tight-checking systems, there isn’t a lot of room in the neutral zone. When a pass is made to a teammate in this area, it is important that the receiver have quick and close support. If the pass receiver is confronted, he will now have the option of chipping the puck into the space behind the checker. The support player can anticipate this and get to the puck first. This is very effective if the pass is confronted by the opposing defenseman stepping up to make a hit. In most cases, the center should be the player who is ready to support the chip (figure 2.17).

When a pass is made by a defenseman to a forward in the neutral zone, the passing D should be ready to move up through mid-ice and support the attack (figure 2.18). As the partner of D1, D2 must remain in a strong center-ice position behind the attack. D1 must again read the quality of puck possession to determine how far to move up and how quickly.

Motion Regroups

The difference with motion regroups is that the center now has the ability to exchange positions with the wingers. Once again, the sequence of options for defensemen in the neutral zone depends on how the opponents forecheck. The advantage of using motion regroups is that the players have more speed when getting the pass and often catch the opposition flat footed. The disadvantage is that the positioning of the forwards is not as predictable and as a result the defensemen can’t always anticipate where they will be. At times the forwards are so focused on moving and building up speed that they lose eye contact with the passer. The forwards must remember to keep their eyes on the puck. With motion regroups, the center always changes lanes with one of the wingers, and then that winger moves into center ice. If the player in the middle moves to support a pass and it is not made, an exchange occurs with the winger on that side (figure 2.19a). The player in the center may also swing away to build up speed on the wide side (figure 2.19b).

With motion regroups, if teams check center on center in the neutral zone, having the center move into an outside lane often results in coverage confusion.

Using the same options presented for lane regroups, we now look at how the passing options change with the center leaving the mid-ice lane.

In this situation, D1 gets the puck just inside the blue line and turns it up quickly by passing to LW or RW, who has moved off the wide boards as C swings to that side (figure 2.20). The exchange between the center and RW must be made quickly in order to provide immediate support for D1.

When D1 gets the puck and the strong-side options are taken away, he then passes to his partner (figure 2.21). C once again swings away to the wide side. Once the pass is made, D1 should sink back to mid-ice to protect his partner in case of a turnover and also to provide an option for D2. D2 passes up to RW or to LW who has moved off the boards and is available in the middle of the ice.

D1 passes to D2, and now because of how the opponents are forechecking, the main option is to make a flat pass to C with speed in the wide lane (figure 2.22). This is one of the more effective options in the motion regroup sequence because the center tends to build up a lot of speed in the wide lane and can often enter the zone easily. This option is usually available when the opponents forecheck in a 1-2-2 formation and lock the center of the ice, leaving the back side open.

D1 passes to D2 and then slides back to mid-ice to support his partner. D2 moves up ice and looks to make a pass. With no option available, he passes back to D1, who is behind and in mid-ice. D1 then moves the puck quickly to C, who once again has a lot of speed built up in the outside lane (figure 2.23). LW may also be available in the middle of the ice. D1 may perform a skating hinge and accelerate up the middle of the ice while looking for options.

When a D1-to-D2 pass is made in the neutral zone, C exchanges with the wing, and now RW has the option of moving out higher in behind the opposing defense (figure 2.24). Because the center swings lower, this provides the defense with an alternative safer option if the stretch play is not there. The RW must time it to hit the open space behind the opposition defense when D2 is ready to pass.