TV бокс Tanix TX68
  Обзор     Корпус     Элементы     Порты     ENV       FDT    
Дерево устройств - Flattened Device Tree (FDT)

Как правило, дерево устройств представлено в виде двух блобов: DTB - основное дерево устройств и DTBO (O-overlay) - оверлей, модифицирующий или дополняющий основное дерево устройств.

В IMAGEWTY-образе прошивки двоичное дерево устройств содержится в файле sunxi.fex, который имеет в самом начале признак DTB - сигнатуру в виде hex-байтов D0 0D FE EF . Файл оверлея в образе прошивки- DTBO.fex.

В самой прошивке, записанной в память устройства (eMMC или SD), оба блоба дерева устройств упакованы в составе boot_package, который располагается в неразмеченной области загрузочного носителя, т.е. до его самого первого раздела.

Кроме того, в Android 12 в таблице разделов GPT неожиданно появился специальный раздел для оверлея (точнее, даже два), которые так и называются:

  • 21. "dtbo_a" и
  • 22. "dtbo_b". В этом оверлее добавлена информация о контроллере питания (PMU,PMIC) типа AXP806, который в данной приставке отсутствует.

    Однако сравнение трех файлов оверлея: dtbo_a и dtbo_b из одноименных разделов, а также файла dtbo из boot_package показывает, что все три файла идентичны. Можно предположить, что специальные разделы для оверлея предусмотрены для выполнения OTA-обновлений, в которых могут вноситься изменения в дерево устройств.

    ВНИМАНИЕ ! При сравнении бинарных блобов DTBO нужно учитывать, что в файлах dtbo.fex (из образа прошивки) и dtbo_a.img (dd-бекап одноименного раздела) сам блоб оверлея лежит со смещением 0x40, именно с этого адреса начинается сигнатура D0 0D FE ED

    Архив с файлами дерева устройств для Tanix TX68 (в бинарном и текстовом виде) можно загрузить по ссылке:
    Файлы дерева устройств Tanix TX68

    Для знакомства с содержимым дерева устройств ниже показаны три таблицы:

  • 1) tree - полное дерево устройств (на основе дампа команды U-Boot fdtprint)
  • 2) node - список узлов дерева, отсортированый по алфавиту
  • 3) overlay - текст DTS, конвертированный из DTBO

    Примечание. Для быстрого поиска свойств конкретного узла можно скопировать его имя из списка node в буфер обмена, затем перейти на страницу с полным деревом tree и подставить скопированное имя в окно поиска браузера.


    • Дерево устройств: DTB    Node    DTBO
    Дерево устройств FDT
    /
      {
      interrupt-parent = <0x00000001>;
      #address-cells = <0x00000002>;
      #size-cells = <0x00000002>;
      model = "sun50iw9";
      compatible = "allwinner,h616", "arm,sun50iw9p1";
      memory
        {
        reg = <0x00000000 0x40000000 0x00000000 0x80000000>;
        device_type = "memory";
        };
      aliases
        {
        serial0 = "/ soc@3000000/ uart@5000000";
        serial1 = "/ soc@3000000/ uart@5000400";
        serial2 = "/ soc@3000000/ uart@5000800";
        serial3 = "/ soc@3000000/ uart@5000c00";
        serial4 = "/ soc@3000000/ uart@5001000";
        serial5 = "/ soc@3000000/ uart@5001400";
        pwm = "/ soc@3000000/ pwm@300a000";
        pwm0 = "/ soc@3000000/ pwm0@300a010";
        pwm1 = "/ soc@3000000/ pwm1@300a011";
        pwm2 = "/ soc@3000000/ pwm2@300a012";
        pwm3 = "/ soc@3000000/ pwm3@300a013";
        pwm4 = "/ soc@3000000/ pwm4@300a014";
        pwm5 = "/ soc@3000000/ pwm5@300a015";
        ir0 = "/ soc@3000000/ s_cir@7040000";
        mmc0 = "/ soc@3000000/ sdmmc@4020000";
        mmc2 = "/ soc@3000000/ sdmmc@4022000";
        tv0 = "/ soc@3000000/ tv0@6520000";
        gmac0 = "/ soc@3000000/ eth@5020000";
        gmac1 = "/ soc@3000000/ eth@5030000";
        ac200 = "/ soc@3000000/ ac200";
        nand0 = "/ soc@3000000/ nand0@4011000";
        ve0 = "/ soc@3000000/ ve@1c0e000";
        ve1 = "/ soc@3000000/ ve1@1c0e000";
        disp = "/ uboot_disp@1000000";
        lcd0 = "/ soc@3000000/ lcd0@1c0c000";
        pmu0 = "/ soc@3000000/ twi@7081400/ pmu";
        standby_param = "/ soc@3000000/ twi@7081400/ pmu/ standby_param";
        hdmi = "/ uboot_hdmi@6000000";
        spi0 = "/ soc@3000000/ spi@5010000";
        spi1 = "/ soc@3000000/ spi@5011000";
        twi0 = "/ soc@3000000/ twi@5002000";
        twi1 = "/ soc@3000000/ twi@5002400";
        twi2 = "/ soc@3000000/ twi@5002800";
        twi3 = "/ soc@3000000/ twi@5002c00";
        twi4 = "/ soc@3000000/ twi@5003000";
        twi5 = "/ soc@3000000/ twi@7081400";
        };
      reserved-memory
        {
        #address-cells = <0x00000002>;
        #size-cells = <0x00000002>;
        ranges;
        bl31
          {
          reg = <0x00000000 0x48000000 0x00000000 0x01000000>;
          };
        };
      firmware
        {
        android
          {
          compatible = "android,firmware";
          boot_devices = "soc@3000000/ 4020000.sdmmc,soc@3000000/ 4022000.sdmmc,soc@3000000";
          vbmeta
            {
            compatible = "android,vbmeta";
            parts = "vbmeta,vbmeta_system,vbmeta_vendor,boot";
            };
          };
        optee
          {
          compatible = "linaro,optee-tz";
          method = "smc";
          };
        };
      cpus
        {
        #address-cells = <0x00000001>;
        #size-cells = <0x00000000>;
        cpu@0
          {
          device_type = "cpu";
          compatible = "arm,cortex-a53";
          reg = <0x00000000>;
          enable-method = "psci";
          clocks = <0x00000002 0x00000015>;
          operating-points-v2 = <0x00000003>;
          cpu-idle-states = <0x00000004>;
          dynamic-power-coefficient = <0x000000ca>;
          #cooling-cells = <0x00000002>;
          cpu-supply = <0x00000005>;
          phandle = <0x00000073>;
          };
        cpu@1
          {
          device_type = "cpu";
          compatible = "arm,cortex-a53";
          reg = <0x00000001>;
          enable-method = "psci";
          clocks = <0x00000002 0x00000015>;
          operating-points-v2 = <0x00000003>;
          cpu-idle-states = <0x00000004>;
          dynamic-power-coefficient = <0x000000ca>;
          #cooling-cells = <0x00000002>;
          };
        cpu@2
          {
          device_type = "cpu";
          compatible = "arm,cortex-a53";
          reg = <0x00000002>;
          enable-method = "psci";
          clocks = <0x00000002 0x00000015>;
          operating-points-v2 = <0x00000003>;
          cpu-idle-states = <0x00000004>;
          dynamic-power-coefficient = <0x000000ca>;
          #cooling-cells = <0x00000002>;
          };
        cpu@3
          {
          device_type = "cpu";
          compatible = "arm,cortex-a53";
          reg = <0x00000003>;
          enable-method = "psci";
          clocks = <0x00000002 0x00000015>;
          operating-points-v2 = <0x00000003>;
          cpu-idle-states = <0x00000004>;
          dynamic-power-coefficient = <0x000000ca>;
          #cooling-cells = <0x00000002>;
          };
        idle-states
          {
          entry-method = "psci";
          cpu-sleep
            {
            compatible = "arm,idle-state";
            local-timer-stop;
            arm,psci-suspend-param = <0x00010000>;
            entry-latency-us = <0x0000002e>;
            exit-latency-us = <0x0000003b>;
            min-residency-us = <0x00000df2>;
            phandle = <0x00000004>;
            };
          };
        };
      cpu-opp-table
        {
        compatible = "allwinner,sun50i-operating-points";
        nvmem-cells = <0x00000006>;
        nvmem-cell-names = "speed";
        opp-shared;
        phandle = <0x00000003>;
        opp@480000000
          {
          opp-hz = <0x00000000 0x1c9c3800>;
          opp-microvolt-a0 = <0x000dbba0>;
          opp-microvolt-a1 = <0x000dbba0>;
          opp-microvolt-a2 = <0x000dbba0>;
          opp-microvolt-a3 = <0x000dbba0>;
          opp-microvolt-a4 = <0x000dbba0>;
          clock-latency-ns = <0x0003b9b0>;
          opp-supported-hw = <0x0000001f>;
          };
        opp@600000000
          {
          opp-hz = <0x00000000 0x23c34600>;
          opp-microvolt-a1 = <0x000dbba0>;
          opp-microvolt-a4 = <0x000dbba0>;
          clock-latency-ns = <0x0003b9b0>;
          opp-supported-hw = <0x00000012>;
          };
        opp@720000000
          {
          opp-hz = <0x00000000 0x2aea5400>;
          opp-microvolt-a0 = <0x000dbba0>;
          opp-microvolt-a2 = <0x000dbba0>;
          opp-microvolt-a3 = <0x000dbba0>;
          clock-latency-ns = <0x0003b9b0>;
          opp-supported-hw = <0x0000000d>;
          };
        opp@792000000
          {
          opp-hz = <0x00000000 0x2f34f600>;
          opp-microvolt-a1 = <0x000dbba0>;
          opp-microvolt-a4 = <0x000e57e0>;
          clock-latency-ns = <0x0003b9b0>;
          opp-supported-hw = <0x00000012>;
          };
        opp@936000000
          {
          opp-hz = <0x00000000 0x37ca3a00>;
          opp-microvolt-a0 = <0x000dbba0>;
          opp-microvolt-a2 = <0x000dbba0>;
          opp-microvolt-a3 = <0x000dbba0>;
          clock-latency-ns = <0x0003b9b0>;
          opp-supported-hw = <0x0000000d>;
          };
        opp@1008000000
          {
          opp-hz = <0x00000000 0x3c14dc00>;
          opp-microvolt-a0 = <0x000e7ef0>;
          opp-microvolt-a1 = <0x000e57e0>;
          opp-microvolt-a2 = <0x000e7ef0>;
          opp-microvolt-a3 = <0x000e7ef0>;
          opp-microvolt-a4 = <0x000f9060>;
          clock-latency-ns = <0x0003b9b0>;
          opp-supported-hw = <0x0000001f>;
          };
        opp@1104000000
          {
          opp-hz = <0x00000000 0x41cdb400>;
          opp-microvolt-a0 = <0x000f4240>;
          opp-microvolt-a2 = <0x000f4240>;
          opp-microvolt-a3 = <0x000f4240>;
          clock-latency-ns = <0x0003b9b0>;
          opp-supported-hw = <0x0000000d>;
          };
        opp@1200000000
          {
          opp-hz = <0x00000000 0x47868c00>;
          opp-microvolt-a0 = <0x00100590>;
          opp-microvolt-a1 = <0x000f9060>;
          opp-microvolt-a2 = <0x00100590>;
          opp-microvolt-a3 = <0x00100590>;
          opp-microvolt-a4 = <0x0010c8e0>;
          clock-latency-ns = <0x0003b9b0>;
          opp-supported-hw = <0x0000001f>;
          };
        opp@1320000000
          {
          opp-hz = <0x00000000 0x4ead9a00>;
          opp-microvolt-a0 = <0x0010c8e0>;
          opp-microvolt-a2 = <0x0010c8e0>;
          opp-microvolt-a3 = <0x0010c8e0>;
          opp-microvolt-a4 = <0x00111700>;
          clock-latency-ns = <0x0003b9b0>;
          opp-supported-hw = <0x0000001d>;
          };
        opp@1416000000
          {
          opp-hz = <0x00000000 0x54667200>;
          opp-microvolt-a0 = <0x00118c30>;
          opp-microvolt-a2 = <0x00118c30>;
          opp-microvolt-a3 = <0x00b10080>;
          clock-latency-ns = <0x0003b9b0>;
          opp-supported-hw = <0x0000000d>;
          };
        opp@1512000000
          {
          opp-hz = <0x00000000 0x5a1f4a00>;
          opp-microvolt-a1 = <0x0010c8e0>;
          opp-microvolt-a3 = <0x0010c8e0>;
          clock-latency-ns = <0x0003b9b0>;
          opp-supported-hw = <0x0000000a>;
          };
        };
      dump-reg@20000
        {
        compatible = "allwinner,sunxi-dump-reg";
        reg = <0x00000000 0x00020000 0x00000000 0x00000004>;
        phandle = <0x00000075>;
        };
      psci
        {
        compatible = "arm,psci-1.0";
        method = "smc";
        };
      internal-osc-clk
        {
        #clock-cells = <0x00000000>;
        compatible = "fixed-clock";
        clock-frequency = "", "-$";
        clock-accuracy = <0x11e1a300>;
        clock-output-names = "iosc";
        phandle = <0x0000000c>;
        };
      dcxo24M-clk
        {
        #clock-cells = <0x00000000>;
        compatible = "fixed-clock";
        clock-frequency = <0x016e3600>;
        clock-output-names = "dcxo24M";
        phandle = <0x0000000a>;
        };
      osc32k-clk
        {
        #clock-cells = <0x00000000>;
        compatible = "fixed-clock";
        clock-frequency = <0x00008000>;
        clock-output-names = "osc32k";
        phandle = <0x0000000b>;
        };
      interrupt-controller@3021000
        {
        compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
        #interrupt-cells = <0x00000003>;
        #address-cells = <0x00000000>;
        interrupt-controller;
        reg = <0x00000000 0x03021000 0x00000000 0x00001000 0x00000000 0x03022000 0x00000000 0x00002000 0x00000000 0x03024000 0x00000000 0x00002000 0x00000000 0x03026000 0x00000000 0x00002000>;
        interrupts = <0x00000001 0x00000009 0x00000f04>;
        interrupt-parent = <0x00000007>;
        phandle = <0x00000007>;
        };
      interrupt-controller@0
        {
        compatible = "allwinner,sunxi-wakeupgen";
        interrupt-controller;
        #interrupt-cells = <0x00000003>;
        interrupt-parent = <0x00000007>;
        phandle = <0x00000001>;
        };
      timer_arch
        {
        compatible = "arm,armv8-timer";
        interrupts = <0x00000001 0x0000000d 0x00000f08 0x00000001 0x0000000e 0x00000f08 0x00000001 0x0000000b 0x00000f08 0x00000001 0x0000000a 0x00000f08>;
        clock-frequency = <0x016e3600>;
        interrupt-parent = <0x00000007>;
        arm,no-tick-in-suspend;
        };
      pio-18
        {
        compatible = "regulator-fixed";
        regulator-name = "pio-18";
        regulator-min-microvolt = <0x001b7740>;
        regulator-max-microvolt = <0x001b7740>;
        phandle = <0x00000017>;
        };
      pio-33
        {
        compatible = "regulator-fixed";
        regulator-name = "pio-33";
        regulator-min-microvolt = <0x00325aa0>;
        regulator-max-microvolt = <0x00325aa0>;
        phandle = <0x00000018>;
        };
      dram
        {
        dram_para[00] = <0x00000288>;
        dram_para[01] = <0x00000003>;
        dram_para[02] = <0x03030303>;
        dram_para[03] = <0x0e0e0e0e>;
        dram_para[04] = <0x00001c12>;
        dram_para[05] = <0x00000001>;
        dram_para[06] = <0x000030fb>;
        dram_para[07] = <0x08000000>;
        dram_para[08] = <0x00001f14>;
        dram_para[09] = <0x00000004>;
        dram_para[10] = <0x00000020>;
        dram_para[11] = <0x00000000>;
        dram_para[12] = <0x00000000>;
        dram_para[13] = <0x00000000>;
        dram_para[14] = <0x00000000>;
        dram_para[15] = <0x00000000>;
        dram_para[16] = <0x00000000>;
        dram_para[17] = <0x00000000>;
        dram_para[18] = <0x00000000>;
        dram_para[19] = <0x00000000>;
        dram_para[20] = <0x00000000>;
        dram_para[21] = <0x00000000>;
        dram_para[22] = <0xc0000c05>;
        dram_para[23] = <0x80000000>;
        dram_para[24] = <0x00000000>;
        dram_para[25] = <0x00000000>;
        dram_para[26] = <0x33808080>;
        dram_para[27] = <0x002f0007>;
        dram_para[28] = <0xffffdddd>;
        dram_para[29] = <0xfedf7557>;
        dram_para[30] = <0x00006041>;
        dram_para[31] = <0x00000000>;
        phandle = <0x00000076>;
        };
      soc@3000000
        {
        compatible = "simple-bus";
        #address-cells = <0x00000002>;
        #size-cells = <0x00000002>;
        ranges;
        phandle = <0x00000077>;
        disp@1000000
          {
          boot_disp2 = <0x00000004>;
          boot_disp1 = <0x01010000>;
          boot_fb0 = "bbf28000,500,2d0,20,1400,0,0,500,2d0";
          compatible = "allwinner,sunxi-disp";
          reg = * 0xbbe536f4 [0x00000060];
          interrupts = <0x00000000 0x00000058 0x00000004 0x00000000 0x00000040 0x00000004 0x00000000 0x00000041 0x00000004 0x00000000 0x00000042 0x00000004 0x00000000 0x00000043 0x00000004>;
          clocks = * 0xbbe537a8 [0x00000080];
          clock-names = "clk_de0", "clk_de1", "clk_bus_de0", "clk_bus_de1", "clk_tcon0", "clk_tcon1", "clk_tcon2", "clk_tcon3", "clk_bus_tcon0", "clk_bus_tcon1", "clk_bus_tcon2", "clk_bus_tcon3", "clk_bus_dpss_top0", "clk_bus_dpss_top1", "clk_bus_dpss_top2", "clk_bus_dpss_top3";
          resets = * 0xbbe53910 [0x00000060];
          reset-names = "rst_bus_de0", "rst_bus_de1", "rst_bus_tcon0", "rst_bus_tcon1", "rst_bus_tcon2", "rst_bus_tcon3", "rst_bus_lvds0", "rst_bus_lvds1", "rst_bus_dpss_top0", "rst_bus_dpss_top1", "rst_bus_dpss_top2", "rst_bus_dpss_top3";
          assigned-clocks = <0x00000002 0x0000007f>;
          assigned-clock-parents = <0x00000002 0x0000000d>;
          assigned-clock-rates = <0x00000000>;
          iommus = <0x00000008 0x00000000 0x00000000>;
          boot_disp = <0x0000040a>;
          fb_base = <0x00000000>;
          disp_init_enable = <0x00000001>;
          disp_mode = <0x00000000>;
          screen0_output_type = <0x00000003>;
          screen0_output_mode = <0x0000000a>;
          screen0_output_format = <0x00000000>;
          screen0_output_bits = <0x00000000>;
          screen0_output_eotf = <0x00000004>;
          screen0_output_cs = <0x00000101>;
          screen0_output_dvi_hdmi = <0x00000002>;
          screen0_output_range = <0x00000002>;
          screen0_output_scan = <0x00000000>;
          screen0_output_aspect_ratio = <0x00000008>;
          screen1_output_type = <0x00000002>;
          screen1_output_mode = <0x0000000b>;
          screen1_output_format = <0x00000001>;
          screen1_output_bits = <0x00000000>;
          screen1_output_eotf = <0x00000004>;
          screen1_output_cs = <0x00000104>;
          screen1_output_dvi_hdmi = <0x00000000>;
          screen1_output_range = <0x00000002>;
          screen1_output_scan = <0x00000000>;
          screen1_output_aspect_ratio = <0x00000008>;
          dev0_output_type = <0x00000004>;
          dev0_output_mode = <0x0000000a>;
          dev0_screen_id = <0x00000000>;
          dev0_do_hpd = <0x00000001>;
          dev1_output_type = <0x00000002>;
          dev1_output_mode = <0x0000000b>;
          dev1_screen_id = <0x00000001>;
          dev1_do_hpd = <0x00000001>;
          dev2_output_type = <0x00000000>;
          def_output_dev = <0x00000000>;
          hdmi_mode_check = <0x00000001>;
          fb0_format = <0x00000000>;
          fb0_width = <0x00000500>;
          fb0_height = <0x000002d0>;
          fb1_format = <0x00000000>;
          fb1_width = <0x00000000>;
          fb1_height = <0x00000000>;
          chn_cfg_mode = <0x00000001>;
          disp_para_zone = <0x00000001>;
          phandle = <0x00000078>;
          };
        ve@1c0e000
          {
          compatible = "allwinner,sunxi-cedar-ve";
          reg = <0x00000000 0x01c0e000 0x00000000 0x00001000 0x00000000 0x03000000 0x00000000 0x00000010 0x00000000 0x03001000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x0000005d 0x00000004>;
          clocks = <0x00000002 0x00000029 0x00000002 0x00000028 0x00000002 0x00000033>;
          clock-names = "bus_ve", "ve", "mbus_ve";
          resets = <0x00000002 0x00000006>;
          iommus = <0x00000008 0x00000003 0x00000001>;
          phandle = <0x00000079>;
          };
        ve1@1c0e000
          {
          compatible = "allwinner,sunxi-cedar-ve";
          iommus = <0x00000008 0x00000002 0x00000001>;
          phandle = <0x0000007a>;
          };
        g2d@1480000
          {
          compatible = "allwinner,sunxi-g2d";
          reg = <0x00000000 0x01480000 0x00000000 0x0003ffff>;
          interrupts = <0x00000000 0x0000005a 0x00000004>;
          clocks = <0x00000002 0x00000022 0x00000002 0x00000021 0x00000002 0x00000038>;
          clock-names = "bus", "g2d", "mbus_g2d";
          resets = <0x00000002 0x00000003>;
          iommus = <0x00000008 0x00000006 0x00000001>;
          phandle = <0x0000007b>;
          };
        deinterlace@1420000
          {
          #address-cells = <0x00000001>;
          #size-cells = <0x00000000>;
          compatible = "allwinner,sunxi-deinterlace";
          reg = <0x00000000 0x01420000 0x00000000 0x00040000>;
          interrupts = <0x00000000 0x00000059 0x00000004>;
          iommus = <0x00000008 0x00000001 0x00000001>;
          status = "okay";
          clocks = <0x00000002 0x0000001f 0x00000002 0x00000020 0x00000002 0x00000005>;
          clock-names = "clk_di", "clk_bus_di", "pll_periph";
          resets = <0x00000002 0x00000002>;
          reset-names = "rst_bus_di";
          assigned-clocks = <0x00000002 0x0000001f>;
          assigned-clock-parents = <0x00000002 0x00000005>;
          assigned-clock-rates = <0x11e1a300>;
          phandle = <0x0000007c>;
          };
        gpu@1800000
          {
          device_type = "gpu";
          compatible = "arm,mali-midgard";
          reg = <0x00000000 0x01800000 0x00000000 0x00010000>;
          interrupts = <0x00000000 0x0000005f 0x00000004 0x00000000 0x00000060 0x00000004 0x00000000 0x00000061 0x00000004>;
          interrupt-names = "JOB", "MMU", "GPU";
          clocks = <0x00000002 0x00000008 0x00000002 0x00000023 0x00000002 0x00000024 0x00000002 0x00000025>;
          clock-names = "clk_parent", "clk_mali", "clk_bak", "clk_bus";
          resets = <0x00000002 0x00000004>;
          #cooling-cells = <0x00000002>;
          gpu_idle = <0x00000001>;
          dvfs_status = <0x00000001>;
          operating-points = * 0xbbe54278 [0x00000050];
          phandle = <0x00000074>;
          ipa_dvfs
            {
            compatible = "arm,mali-simple-power-model";
            static-coefficient = <0x00004268>;
            dynamic-coefficient = <0x000002ee>;
            ts = <0x0003e2da 0x00002568 0xffffff98 0x00000004>;
            thermal-zone = "gpu_thermal_zone";
            ss-coefficient = <0x00000024>;
            ff-coefficient = <0x00000123>;
            phandle = <0x0000007d>;
            };
          };
        lcd0@1c0c000
          {
          compatible = "allwinner,sunxi-lcd0";
          reg = <0x00000000 0x01c0c000 0x00000000 0x00000000>;
          pinctrl-names = "active", "sleep";
          lcd_used = <0x00000000>;
          lcd_driver_name = "default_lcd";
          lcd_backlight = <0x00000032>;
          lcd_if = <0x00000000>;
          lcd_x = <0x00000500>;
          lcd_y = <0x000002d0>;
          lcd_width = <0x00000096>;
          lcd_height = <0x0000005e>;
          lcd_dclk_freq = <0x00000046>;
          lcd_pwm_used = <0x00000000>;
          lcd_pwm_ch = <0x00000000>;
          lcd_pwm_freq = <0x0000c350>;
          lcd_pwm_pol = <0x00000000>;
          lcd_pwm_max_limit = <0x000000ff>;
          lcd_hbp = <0x00000014>;
          lcd_ht = <0x0000058a>;
          lcd_hspw = <0x0000000a>;
          lcd_vbp = <0x0000000a>;
          lcd_vt = <0x0000032e>;
          lcd_vspw = <0x00000005>;
          lcd_lvds_if = <0x00000000>;
          lcd_lvds_colordepth = <0x00000000>;
          lcd_lvds_mode = <0x00000000>;
          lcd_frm = <0x00000000>;
          lcd_hv_clk_phase = <0x00000000>;
          lcd_hv_sync_polarity = <0x00000000>;
          lcd_gamma_en = <0x00000000>;
          lcd_bright_curve_en = <0x00000000>;
          lcd_cmap_en = <0x00000000>;
          deu_mode = <0x00000000>;
          lcdgamma4iep = <0x00000016>;
          smart_color = <0x0000005a>;
          lcd_pin_power = "bldo1";
          lcd_power = "dc1sw";
          phandle = <0x0000007e>;
          };
        tv0@6520000
          {
          compatible = "allwinner,sunxi-tv";
          reg = <0x00000000 0x06520000 0x00000000 0x00000100 0x00000000 0x06524000 0x00000000 0x000003fc>;
          clocks = <0x00000002 0x00000085 0x00000002 0x00000083 0x00000002 0x00000084>;
          clock-names = "clk_bus_tve_top", "clk_tve", "clk_bus_tve";
          resets = <0x00000002 0x0000003e 0x00000002 0x0000003f>;
          reset-names = "rst_bus_tve_top", "rst_bus_tve";
          assigned-clocks = <0x00000002 0x00000083>;
          assigned-clock-parents = <0x00000002 0x0000000b>;
          nvmem-cells = <0x00000009>;
          nvmem-cell-names = "tvout";
          device_type = "tv0";
          pinctrl-names = "active", "sleep";
          status = "okay";
          interface = <0x00000001>;
          dac_type0 = <0x00000000>;
          dac_src0 = <0x00000000>;
          phandle = <0x0000007f>;
          };
        ccu@3001000
          {
          compatible = "allwinner,sun50iw9-ccu";
          reg = <0x00000000 0x03001000 0x00000000 0x00001000>;
          clocks = <0x0000000a 0x0000000b 0x0000000c>;
          clock-names = "hosc", "losc", "iosc";
          #clock-cells = <0x00000001>;
          #reset-cells = <0x00000001>;
          phandle = <0x00000002>;
          };
        rtc_ccu@7000000
          {
          compatible = "allwinner,sun50iw9-rtc-ccu";
          reg = <0x00000000 0x07000000 0x00000000 0x00000400>;
          #clock-cells = <0x00000001>;
          clocks = <0x0000000b>;
          clock-names = "losc";
          #reset-cells = <0x00000001>;
          phandle = <0x0000000e>;
          };
        rtc@7000000
          {
          compatible = "allwinner,rtc-v200";
          device_type = "rtc";
          wakeup-source;
          reg = <0x00000000 0x07000000 0x00000000 0x00000200>;
          interrupts = <0x00000000 0x00000068 0x00000004>;
          clocks = <0x0000000d 0x00000009 0x0000000e 0x00000000>;
          clock-names = "r-ahb-rtc", "rtc-1k";
          gpr_cur_pos = <0x00000006>;
          phandle = <0x00000080>;
          };
        r_ccu@7010000
          {
          compatible = "allwinner,sun50iw9-r-ccu";
          reg = <0x00000000 0x07010000 0x00000000 0x00000300>;
          clocks = <0x0000000a 0x0000000b 0x0000000c 0x00000002 0x00000004>;
          clock-names = "hosc", "losc", "iosc", "pll-periph";
          #clock-cells = <0x00000001>;
          #reset-cells = <0x00000001>;
          phandle = <0x0000000d>;
          };
        dma-controller@3002000
          {
          compatible = "allwinner,sun50iw9-dma";
          reg = <0x00000000 0x03002000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x0000002a 0x00000004>;
          clocks = <0x00000002 0x0000002a 0x00000002 0x00000032>;
          clock-names = "bus", "mbus";
          dma-channels = <0x00000010>;
          dma-requests = <0x00000031>;
          resets = <0x00000002 0x00000007>;
          #dma-cells = <0x00000001>;
          phandle = <0x00000035>;
          };
        sram_ctrl@3000000
          {
          compatible = "allwinner,sram_ctrl";
          reg = <0x00000000 0x03000000 0x00000000 0x0000016c>;
          phandle = <0x00000081>;
          soc_ver
            {
            offset = <0x00000024>;
            mask = <0x00000007>;
            shift = <0x00000000>;
            };
          soc_id
            {
            offset = <0x00000200>;
            mask = <0x00000001>;
            shift = <0x00000016>;
            };
          soc_bin
            {
            offset = <0x00000000>;
            mask = <0x000003ff>;
            shift = <0x00000000>;
            };
          };
        sid@3006000
          {
          compatible = "allwinner,sun50iw9p1-sid", "allwinner,sunxi-sid";
          reg = <0x00000000 0x03006000 0x00000000 0x00001000>;
          #address-cells = <0x00000001>;
          #size-cells = <0x00000001>;
          speed@00
            {
            reg = <0x00000000 0x00000002>;
            phandle = <0x00000006>;
            };
          calib@14
            {
            reg = <0x00000014 0x00000008>;
            phandle = <0x00000045>;
            };
          tvout@2e
            {
            reg = <0x0000002c 0x00000008>;
            phandle = <0x00000009>;
            };
          i-cpu@28
            {
            reg = <0x00000028 0x00000002>;
            phandle = <0x00000082>;
            };
          secure_status
            {
            reg = <0x00000000 0x00000000>;
            offset = <0x000000a0>;
            size = <0x00000004>;
            };
          chipid
            {
            reg = <0x00000000 0x00000000>;
            offset = <0x00000200>;
            size = <0x00000010>;
            };
          rotpk
            {
            reg = <0x00000000 0x00000000>;
            offset = <0x00000270>;
            size = <0x00000020>;
            };
          };
        ce@1904000
          {
          compatible = "allwinner,sunxi-ce";
          device_name = "ce";
          reg = <0x00000000 0x01904000 0x00000000 0x000000a0 0x00000000 0x01904800 0x00000000 0x000000a0>;
          interrupts = <0x00000000 0x0000005b 0x00000001 0x00000000 0x0000005c 0x00000001>;
          clock-frequency = <0x11e1a300>;
          clocks = <0x00000002 0x00000027 0x00000002 0x00000026 0x00000002 0x00000034 0x00000002 0x00000005>;
          clock-names = "bus_ce", "ce_clk", "mbus_ce", "pll_periph0_2x";
          resets = <0x00000002 0x00000005>;
          phandle = <0x00000083>;
          };
        timer@3009000
          {
          compatible = "allwinner,sun4i-a10-timer";
          device_type = "soc_timer";
          reg = <0x00000000 0x03009000 0x00000000 0x00000400>;
          interrupt-parent = <0x00000007>;
          interrupts = <0x00000000 0x00000030 0x00000004>;
          clocks = <0x0000000a>;
          phandle = <0x00000084>;
          };
        watchdog@30090a0
          {
          compatible = "allwinner,sun6i-a31-wdt";
          reg = <0x00000000 0x030090a0 0x00000000 0x00000020>;
          interrupts = <0x00000000 0x00000032 0x00000004>;
          phandle = <0x00000085>;
          };
        pwm@300a000
          {
          compatible = "allwinner,sunxi-pwm-v100";
          reg = <0x00000000 0x0300a000 0x00000000 0x00000400>;
          clocks = <0x00000002 0x0000002f>;
          resets = <0x00000002 0x0000000b>;
          pwm-number = <0x00000006>;
          pwm-base = <0x00000000>;
          sunxi-pwms = <0x0000000f 0x00000010 0x00000011 0x00000012 0x00000013 0x00000014>;
          phandle = <0x00000086>;
          };
        pwm0@300a010
          {
          compatible = "allwinner,sunxi-pwm0";
          reg = <0x00000000 0x0300a010 0x00000000 0x00000004>;
          reg_base = <0x0300a000>;
          phandle = <0x0000000f>;
          };
        pwm1@300a011
          {
          compatible = "allwinner,sunxi-pwm1";
          reg = <0x00000000 0x0300a011 0x00000000 0x00000004>;
          reg_base = <0x0300a000>;
          phandle = <0x00000010>;
          };
        pwm2@300a012
          {
          compatible = "allwinner,sunxi-pwm2";
          reg = <0x00000000 0x0300a012 0x00000000 0x00000004>;
          reg_base = <0x0300a000>;
          phandle = <0x00000011>;
          };
        pwm3@300a013
          {
          compatible = "allwinner,sunxi-pwm3";
          reg = <0x00000000 0x0300a013 0x00000000 0x00000004>;
          reg_base = <0x0300a000>;
          phandle = <0x00000012>;
          };
        pwm4@300a014
          {
          compatible = "allwinner,sunxi-pwm4";
          reg = <0x00000000 0x0300a014 0x00000000 0x00000004>;
          reg_base = <0x0300a000>;
          phandle = <0x00000013>;
          };
        pwm5@300a015
          {
          compatible = "allwinner,sunxi-pwm5";
          reg = <0x00000000 0x0300a015 0x00000000 0x00000004>;
          reg_base = <0x0300a000>;
          pinctrl-names = "active", "sleep";
          pinctrl-0 = <0x00000015>;
          pinctrl-1 = <0x00000016>;
          status = "okay";
          phandle = <0x00000014>;
          };
        ac200
          {
          compatible = "allwinner,sunxi-ac200";
          status = "okay";
          tv_used = <0x00000001>;
          tv_twi_used = <0x00000001>;
          tv_twi_id = <0x00000003>;
          tv_twi_addr = <0x00000010>;
          tv_pwm_ch = <0x00000005>;
          phandle = <0x00000087>;
          };
        pinctrl@300b000
          {
          compatible = "allwinner,sun50iw9-pinctrl";
          reg = <0x00000000 0x0300b000 0x00000000 0x00000400>;
          interrupts = * 0xbbe55708 [0x00000060];
          clocks = <0x00000002 0x0000001a 0x0000000a 0x0000000b>;
          clock-names = "apb", "hosc", "losc";
          gpio-controller;
          #gpio-cells = <0x00000003>;
          interrupt-controller;
          #interrupt-cells = <0x00000003>;
          vcc-pf-supply = <0x00000017>;
          vcc-pfo-supply = <0x00000018>;
          vcc-pg-supply = <0x00000017>;
          phandle = <0x00000023>;
          uart0-ph-pins
            {
            pins = "PH0", "PH1";
            function = "uart0";
            bias-pull-up;
            phandle = <0x00000029>;
            };
          uart0-ph-sleep
            {
            pins = "PH0", "PH1";
            function = "gpio_in";
            phandle = <0x0000002a>;
            };
          sdc0@0
            {
            pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
            function = "sdc0";
            drive-strength = <0x0000001e>;
            bias-pull-up;
            power-source = <0x00000ce4>;
            allwinner,pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
            allwinner,function = "sdc0";
            allwinner,muxsel = <0x00000002>;
            allwinner,drive = <0x00000003>;
            allwinner,pull = <0x00000001>;
            phandle = <0x0000001e>;
            };
          sdc0@1
            {
            pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
            function = "sdc0";
            drive-strength = <0x0000001e>;
            bias-pull-up;
            power-source = <0x00000708>;
            phandle = <0x0000001f>;
            };
          sdc0@2
            {
            pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5";
            function = "gpio_in";
            phandle = <0x00000020>;
            };
          sdc0@3
            {
            pins = "PF2", "PF4";
            function = "uart0";
            drive-strength = <0x0000000a>;
            bias-pull-up;
            phandle = <0x00000021>;
            };
          sdc0@4
            {
            pins = "PF0", "PF1", "PF3", "PF5";
            function = "jtag";
            drive-strength = <0x0000000a>;
            bias-pull-up;
            phandle = <0x00000022>;
            };
          sdc1@0
            {
            pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5";
            function = "sdc1";
            drive-strength = <0x0000001e>;
            bias-pull-up;
            phandle = <0x00000024>;
            };
          sdc1@1
            {
            pins = "PG0", "PG1", "PG2", "PG3", "PG4", "PG5";
            function = "gpio_in";
            bias-pull-up;
            phandle = <0x00000025>;
            };
          sdc2@0
            {
            pins = "PC1", "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC13", "PC14", "PC15", "PC16";
            function = "sdc2";
            drive-strength = <0x0000001e>;
            bias-pull-up;
            allwinner,pins = "PC1", "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC13", "PC14", "PC15", "PC16";
            allwinner,function = "sdc2";
            allwinner,muxsel = <0x00000003>;
            allwinner,drive = <0x00000003>;
            allwinner,pull = <0x00000001>;
            phandle = <0x00000019>;
            };
          sdc2@1
            {
            pins = "PC0", "PC1", "PC5", "PC6", "PC8", "PC9", "PC10", "PC11", "PC13", "PC14", "PC15", "PC16";
            function = "gpio_in";
            bias-pull-up;
            phandle = <0x0000001b>;
            };
          sdc2@2
            {
            allwinner,pins = "PC0";
            allwinner,function = "sdc2";
            drive-strength = <0x0000001e>;
            bias-pull-down;
            allwinner,muxsel = <0x00000003>;
            allwinner,drive = <0x00000003>;
            allwinner,pull = <0x00000002>;
            phandle = <0x0000001a>;
            };
          nand0@0
            {
            pins = "PC0", "PC1", "PC2", "PC5", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC16";
            function = "nand0";
            drive-strength = <0x00000028>;
            phandle = <0x00000026>;
            };
          nand0@1
            {
            pins = "PC4", "PC6", "PC3", "PC7";
            function = "nand0";
            drive-strength = <0x00000028>;
            bias-pull-up;
            phandle = <0x00000027>;
            };
          nand0@2
            {
            pins = "PC0", "PC1", "PC2", "PC3", "PC4", "PC5", "PC6", "PC7", "PC8", "PC9", "PC10", "PC11", "PC12", "PC13", "PC14", "PC15", "PC16";
            function = "gpio_in";
            phandle = <0x00000028>;
            };
          uart1-ph-pins
            {
            pins = "PG6", "PG7", "PG8", "PG9";
            function = "uart1";
            phandle = <0x0000002b>;
            };
          uart1-ph-sleep
            {
            pins = "PG6", "PG7", "PG8", "PG9";
            function = "gpio_in";
            phandle = <0x0000002c>;
            };
          uart2-ph-pins
            {
            pins = "PG15", "PG16";
            function = "uart2";
            phandle = <0x0000002d>;
            };
          uart2-ph-sleep
            {
            pins = "PG15", "PG16";
            function = "gpio_in";
            phandle = <0x0000002e>;
            };
          uart3-ph-pins
            {
            pins = "PI9", "PI10";
            function = "uart3";
            phandle = <0x0000002f>;
            };
          uart3-ph-sleep
            {
            pins = "PI9", "PI10";
            function = "gpio_in";
            phandle = <0x00000030>;
            };
          uart4-ph-pins
            {
            pins = "PI13", "PI14";
            function = "uart4";
            phandle = <0x00000031>;
            };
          uart4-ph-sleep
            {
            pins = "PI13", "PI14";
            function = "gpio_in";
            phandle = <0x00000032>;
            };
          uart5-ph-pins
            {
            pins = "PH2", "PH3";
            function = "uart5";
            phandle = <0x00000033>;
            };
          uart5-ph-sleep
            {
            pins = "PH2", "PH3";
            function = "gpio_in";
            phandle = <0x00000034>;
            };
          s_cir0@0
            {
            pins = "PH10";
            function = "ir";
            drive-strength = <0x0000000a>;
            bias-pull-up;
            phandle = <0x00000061>;
            };
          s_cir0@1
            {
            pins = "PH10";
            function = "gpio_in";
            phandle = <0x00000062>;
            };
          twi0@0
            {
            pins = "PI5", "PI6";
            function = "twi0";
            drive-strength = <0x0000000a>;
            bias-pull-up;
            phandle = <0x00000036>;
            };
          twi0@1
            {
            pins = "PI5", "PI6";
            function = "gpio_in";
            phandle = <0x00000037>;
            };
          twi1@0
            {
            pins = "PH0", "PH1";
            function = "twi1";
            drive-strength = <0x0000000a>;
            bias-pull-up;
            phandle = <0x00000038>;
            };
          twi1@1
            {
            pins = "PH0", "PH1";
            function = "gpio_in";
            phandle = <0x00000039>;
            };
          twi2@0
            {
            pins = "PH2", "PH3";
            function = "twi2";
            drive-strength = <0x0000000a>;
            bias-pull-up;
            phandle = <0x0000003a>;
            };
          twi2@1
            {
            pins = "PH2", "PH3";
            function = "gpio_in";
            phandle = <0x0000003b>;
            };
          twi3@0
            {
            pins = "PG17", "PG18";
            function = "twi3";
            drive-strength = <0x0000000a>;
            bias-pull-up;
            phandle = <0x0000003c>;
            };
          twi3@1
            {
            pins = "PG17", "PG18";
            function = "gpio_in";
            phandle = <0x0000003d>;
            };
          twi4@0
            {
            pins = "PG15", "PG16";
            function = "twi4";
            drive-strength = <0x0000000a>;
            bias-pull-up;
            phandle = <0x0000003e>;
            };
          twi4@1
            {
            pins = "PG15", "PG16";
            function = "gpio_in";
            phandle = <0x0000003f>;
            };
          spi1@0
            {
            allwinner,pins = "PH6", "PH7", "PH8";
            allwinner,pname = "spi1_sclk", "spi1_mosi", "spi1_miso";
            allwinner,function = "spi1";
            allwinner,muxsel = <0x00000004>;
            allwinner,drive = <0x00000002>;
            allwinner,pull = <0x00000000>;
            phandle = <0x00000042>;
            };
          spi1@1
            {
            allwinner,pins = "PH5", "PH9";
            allwinner,pname = "spi1_cs0", "spi1_cs1";
            allwinner,function = "spi1";
            allwinner,muxsel = <0x00000004>;
            allwinner,drive = <0x00000002>;
            allwinner,pull = <0x00000001>;
            phandle = <0x00000043>;
            };
          spi1@2
            {
            allwinner,pins = "PH5", "PH6", "PH7", "PH8", "PH9";
            allwinner,function = "gpio_in";
            allwinner,muxsel = <0x00000000>;
            allwinner,drive = <0x00000002>;
            allwinner,pull = <0x00000000>;
            phandle = <0x00000044>;
            };
          gmac0@0
            {
            pins = "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15", "PI16";
            function = "gmac0";
            drive-strength = <0x0000000a>;
            bias-pull-up;
            phandle = <0x0000005b>;
            };
          gmac0@1
            {
            pins = "PI0", "PI1", "PI2", "PI3", "PI4", "PI5", "PI6", "PI7", "PI8", "PI9", "PI10", "PI11", "PI12", "PI13", "PI14", "PI15", "PI16";
            function = "io_disabled";
            drive-strength = <0x0000000a>;
            phandle = <0x0000005c>;
            };
          gmac1@0
            {
            pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9";
            function = "gmac1";
            drive-strength = <0x0000000a>;
            bias-pull-up;
            phandle = <0x0000005d>;
            };
          gmac1@1
            {
            pins = "PA0", "PA1", "PA2", "PA3", "PA4", "PA5", "PA6", "PA7", "PA8", "PA9";
            function = "io_disabled";
            drive-strength = <0x0000000a>;
            phandle = <0x0000005e>;
            };
          pwm5@0
            {
            pins = "PA12";
            function = "pwm5";
            drive-strength = <0x0000000a>;
            bias-pull-up;
            phandle = <0x00000015>;
            };
          pwm5@1
            {
            pins = "PA12";
            function = "gpio_in";
            phandle = <0x00000016>;
            };
          spdif@0
            {
            pins = "PH4";
            function = "spdif";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x00000048>;
            };
          spdif_sleep@0
            {
            pins = "PH4";
            function = "gpio_in";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x00000049>;
            };
          ahub_daudio0@0
            {
            pins = "PA6", "PA7", "PA8", "PA9";
            function = "i2s0";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x00000088>;
            };
          ahub_daudio0_sleep@0
            {
            pins = "PA6", "PA7", "PA8", "PA9";
            function = "gpio_in";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x00000089>;
            };
          ahub_daudio2@0
            {
            pins = "PG11", "PG12";
            function = "i2s2";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x0000004c>;
            };
          ahub_daudio2@1
            {
            pins = "PG13";
            function = "i2s2_dout0";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x0000004d>;
            };
          ahub_daudio2@2
            {
            pins = "PG14";
            function = "i2s2_din0";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x0000004e>;
            };
          ahub_daudio2_sleep@0
            {
            pins = "PG11", "PG12", "PG13", "PG14";
            function = "gpio_in";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x0000004f>;
            };
          ahub_daudio3@0
            {
            pins = "PH5", "PH6", "PH7";
            function = "i2s3";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x0000008a>;
            };
          ahub_daudio3@1
            {
            pins = "PH8";
            function = "i2s3_dout0";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x0000008b>;
            };
          ahub_daudio3@2
            {
            pins = "PH9";
            function = "i2s3_din0";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x0000008c>;
            };
          ahub_daudio3_sleep@0
            {
            pins = "PH5", "PH6", "PH7", "PH8", "PH9";
            function = "gpio_in";
            drive-strength = <0x00000014>;
            bias-disable;
            phandle = <0x0000008d>;
            };
          };
        pinctrl@7022000
          {
          compatible = "allwinner,sun50iw9-r-pinctrl";
          reg = <0x00000000 0x07022000 0x00000000 0x00000400>;
          clocks = <0x0000000d 0x00000002 0x0000000a 0x0000000b>;
          clock-names = "apb", "hosc", "losc";
          gpio-controller;
          #gpio-cells = <0x00000003>;
          phandle = <0x0000008e>;
          s_twi0@0
            {
            pins = "PL0", "PL1";
            function = "s_twi0";
            drive-strength = <0x00000014>;
            bias-pull-up;
            phandle = <0x00000040>;
            };
          s_twi0@1
            {
            pins = "PL0", "PL1";
            function = "gpio_in";
            phandle = <0x00000041>;
            };
          };
        iommu@30f0000
          {
          compatible = "allwinner,sunxi-iommu";
          reg = <0x00000000 0x030f0000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x0000003d 0x00000004>;
          interrupt-names = "iommu-irq";
          clocks = <0x00000002 0x00000030>;
          clock-names = "iommu";
          #iommu-cells = <0x00000002>;
          phandle = <0x00000008>;
          };
        sdmmc@4022000
          {
          compatible = "allwinner,sunxi-mmc-v4p6x";
          device_type = "sdc2";
          reg = <0x00000000 0x04022000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x00000025 0x00000004>;
          clocks = <0x0000000a 0x00000002 0x00000007 0x00000002 0x0000003f 0x00000002 0x00000042>;
          clock-names = "osc24m", "pll_periph", "mmc", "ahb";
          resets = <0x00000002 0x00000010>;
          reset-names = "rst";
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x00000019 0x0000001a>;
          pinctrl-1 = <0x0000001b>;
          bus-width = <0x00000008>;
          req-page-count = <0x00000002>;
          cap-mmc-highspeed;
          cap-cmd23;
          ctl-spec-caps = <0x00000308>;
          mmc-cache-ctrl;
          non-removable;
          max-frequency = <0x05f5e100>;
          cap-erase;
          mmc-high-capacity-erase-size;
          no-sdio;
          no-sd;
          sdc_tm4_sm0_freq0 = <0xffffffff>;
          sdc_tm4_sm0_freq1 = <0xffffffff>;
          sdc_tm4_sm1_freq0 = <0xff16ffff>;
          sdc_tm4_sm1_freq1 = <0xffffffff>;
          sdc_tm4_sm2_freq0 = <0xff1414ff>;
          sdc_tm4_sm2_freq1 = <0xffffffff>;
          sdc_tm4_sm3_freq0 = <0x1313ffff>;
          sdc_tm4_sm3_freq1 = <0xffffff17>;
          sdc_tm4_sm4_freq0 = <0x0f18ffff>;
          sdc_tm4_sm4_freq1 = <0xffffffff>;
          sdc_tm4_sm4_freq0_cmd = <0x1313ffff>;
          sdc_tm4_sm4_freq1_cmd = <0xffffffff>;
          status = "okay";
          mmc-ddr-1_8v;
          mmc-hs200-1_8v;
          mmc-hs400-1_8v;
          sunxi-dis-signal-vol-sw;
          vmmc-supply = <0x0000001c>;
          vqmmc-supply = <0x0000001d>;
          phandle = <0x0000008f>;
          };
        sdmmc@4020000
          {
          compatible = "allwinner,sunxi-mmc-v4p1x";
          device_type = "sdc0";
          reg = <0x00000000 0x04020000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x00000023 0x00000004>;
          clocks = <0x0000000a 0x00000002 0x00000007 0x00000002 0x0000003d 0x00000002 0x00000040>;
          clock-names = "osc24m", "pll_periph", "mmc", "ahb";
          resets = <0x00000002 0x0000000e>;
          reset-names = "rst";
          pinctrl-names = "default", "mmc_1v8", "sleep", "uart_jtag";
          pinctrl-0 = <0x0000001e>;
          pinctrl-1 = <0x0000001f>;
          pinctrl-2 = <0x00000020>;
          pinctrl-3 = <0x00000021 0x00000022>;
          max-frequency = <0x08f0d180>;
          bus-width = <0x00000004>;
          req-page-count = <0x00000002>;
          ctl-spec-caps = <0x00000008>;
          cap-sd-highspeed;
          cap-wait-while-busy;
          no-sdio;
          no-mmc;
          status = "okay";
          sd-uhs-sdr50;
          sd-uhs-ddr50;
          sd-uhs-sdr104;
          vmmc-supply = <0x0000001c>;
          vqmmc33sw-supply = <0x0000001c>;
          vdmmc33sw-supply = <0x0000001c>;
          vqmmc18sw-supply = <0x0000001d>;
          vdmmc18sw-supply = <0x0000001d>;
          cd-gpios = <0x00000023 0x00000008 0x00000010 0x00000011>;
          phandle = <0x00000090>;
          };
        sdmmc@4021000
          {
          compatible = "allwinner,sunxi-mmc-v4p1x";
          device_type = "sdc1";
          reg = <0x00000000 0x04021000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x00000024 0x00000004>;
          clocks = <0x0000000a 0x00000002 0x00000007 0x00000002 0x0000003e 0x00000002 0x00000041>;
          clock-names = "osc24m", "pll_periph", "mmc", "ahb";
          resets = <0x00000002 0x0000000f>;
          reset-names = "rst";
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x00000024>;
          pinctrl-1 = <0x00000025>;
          max-frequency = <0x08f0d180>;
          bus-width = <0x00000004>;
          ctl-spec-caps = <0x00000008>;
          cap-sd-highspeed;
          no-mmc;
          keep-power-in-suspend;
          sunxi-dly-52M-ddr4 = <0x00000001 0x00000000 0x00000000 0x00000000 0x00000002>;
          sunxi-dly-104M = <0x00000001 0x00000000 0x00000000 0x00000000 0x00000001>;
          sunxi-dly-208M = <0x00000001 0x00000000 0x00000000 0x00000000 0x00000001>;
          status = "okay";
          no-sd;
          sd-uhs-sdr12;
          sd-uhs-sdr25;
          sd-uhs-sdr50;
          sd-uhs-ddr50;
          sd-uhs-sdr104;
          sunxi-dis-signal-vol-sw;
          cap-sdio-irq;
          ignore-pm-notify;
          vmmc-supply = <0x0000001c>;
          vqmmc-supply = <0x0000001d>;
          phandle = <0x00000091>;
          };
        nand0@4011000
          {
          compatible = "allwinner,sun50iw9-nand";
          device_type = "nand0";
          reg = <0x00000000 0x04011000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x00000022 0x00000004>;
          clocks = <0x00000002 0x00000007 0x00000002 0x0000003a 0x00000002 0x0000003b 0x00000002 0x0000003c 0x00000002 0x00000036>;
          clock-names = "pll_periph", "mclk", "ecc", "bus", "mbus";
          resets = <0x00000002 0x0000000d>;
          reset-names = "rst";
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x00000026 0x00000027>;
          pinctrl-1 = <0x00000028>;
          nand0_cache_level = <0x55aaaa55>;
          nand0_flush_cache_num = <0x55aaaa55>;
          nand0_capacity_level = <0x55aaaa55>;
          nand0_id_number_ctl = <0x55aaaa55>;
          nand0_print_level = <0x55aaaa55>;
          nand0_p0 = <0x55aaaa55>;
          nand0_p1 = <0x55aaaa55>;
          nand0_p2 = <0x55aaaa55>;
          nand0_p3 = <0x55aaaa55>;
          chip_code = "sun50iw9";
          status = "disabled";
          nand0_regulator1-supply = <0x0000001c>;
          nand0_regulator2-supply = <0x0000001d>;
          phandle = <0x00000092>;
          };
        mbus-controller@47fa000
          {
          compatible = "allwinner,sun50i-mbus";
          reg = <0x00000000 0x047fa000 0x00000000 0x00001000>;
          #mbus-cells = <0x00000001>;
          phandle = <0x00000093>;
          };
        uart@5000000
          {
          compatible = "allwinner,sun50i-uart";
          reg = <0x00000000 0x05000000 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000000 0x00000004>;
          clocks = <0x00000002 0x00000043>;
          resets = <0x00000002 0x00000011>;
          uart0_port = <0x00000000>;
          uart0_type = <0x00000002>;
          status = "okay";
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x00000029>;
          pinctrl-1 = <0x0000002a>;
          phandle = <0x00000094>;
          };
        uart@5000400
          {
          compatible = "allwinner,sun50i-uart";
          reg = <0x00000000 0x05000400 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000001 0x00000004>;
          clocks = <0x00000002 0x00000044>;
          resets = <0x00000002 0x00000012>;
          uart1_port = <0x00000001>;
          uart1_type = <0x00000004>;
          sunxi,uart-fifosize = <0x00000100>;
          status = "okay";
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x0000002b>;
          pinctrl-1 = <0x0000002c>;
          device_type = "uart1";
          phandle = <0x00000095>;
          };
        uart@5000800
          {
          compatible = "allwinner,sun50i-uart";
          reg = <0x00000000 0x05000800 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000002 0x00000004>;
          clocks = <0x00000002 0x00000045>;
          resets = <0x00000002 0x00000013>;
          uart2_port = <0x00000002>;
          uart2_type = <0x00000004>;
          sunxi,uart-fifosize = <0x00000100>;
          status = "disabled";
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x0000002d>;
          pinctrl-1 = <0x0000002e>;
          phandle = <0x00000096>;
          };
        uart@5000c00
          {
          compatible = "allwinner,sun50i-uart";
          reg = <0x00000000 0x05000c00 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000003 0x00000004>;
          clocks = <0x00000002 0x00000046>;
          resets = <0x00000002 0x00000014>;
          uart3_port = <0x00000003>;
          uart3_type = <0x00000004>;
          sunxi,uart-fifosize = <0x00000100>;
          status = "disabled";
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x0000002f>;
          pinctrl-1 = <0x00000030>;
          phandle = <0x00000097>;
          };
        uart@5001000
          {
          compatible = "allwinner,sun50i-uart";
          reg = <0x00000000 0x05001000 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000004 0x00000004>;
          clocks = <0x00000002 0x00000047>;
          resets = <0x00000002 0x00000015>;
          uart4_port = <0x00000004>;
          uart4_type = <0x00000004>;
          sunxi,uart-fifosize = <0x00000100>;
          status = "disabled";
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x00000031>;
          pinctrl-1 = <0x00000032>;
          phandle = <0x00000098>;
          };
        uart@5001400
          {
          compatible = "allwinner,sun50i-uart";
          reg = <0x00000000 0x05001400 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000005 0x00000004>;
          clocks = <0x00000002 0x00000048>;
          resets = <0x00000002 0x00000016>;
          uart5_port = <0x00000005>;
          uart5_type = <0x00000002>;
          sunxi,uart-fifosize = <0x00000100>;
          status = "disabled";
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x00000033>;
          pinctrl-1 = <0x00000034>;
          phandle = <0x00000099>;
          };
        twi@5002000
          {
          #address-cells = <0x00000001>;
          #size-cells = <0x00000000>;
          compatible = "allwinner,sun50i-twi";
          device_type = "twi0";
          reg = <0x00000000 0x05002000 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000006 0x00000004>;
          clocks = <0x00000002 0x00000049>;
          clock-names = "bus";
          resets = <0x00000002 0x00000017>;
          dmas = <0x00000035 0x0000002b 0x00000035 0x0000002b>;
          dma-names = "tx", "rx";
          status = "disabled";
          clock-frequency = <0x00061a80>;
          pinctrl-0 = <0x00000036>;
          pinctrl-1 = <0x00000037>;
          pinctrl-names = "default", "sleep";
          twi_drv_used = <0x00000001>;
          phandle = <0x0000009a>;
          eeprom@50
            {
            compatible = "atmel,24c16";
            reg = <0x00000050>;
            status = "disabled";
            };
          };
        twi@5002400
          {
          #address-cells = <0x00000001>;
          #size-cells = <0x00000000>;
          compatible = "allwinner,sun50i-twi";
          device_type = "twi1";
          reg = <0x00000000 0x05002400 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000007 0x00000004>;
          clocks = <0x00000002 0x0000004a>;
          clock-names = "bus";
          resets = <0x00000002 0x00000018>;
          dmas = <0x00000035 0x0000002c 0x00000035 0x0000002c>;
          dma-names = "tx", "rx";
          status = "disabled";
          clock-frequency = <0x00061a80>;
          pinctrl-0 = <0x00000038>;
          pinctrl-1 = <0x00000039>;
          pinctrl-names = "default", "sleep";
          twi_drv_used = <0x00000001>;
          phandle = <0x0000009b>;
          };
        twi@5002800
          {
          #address-cells = <0x00000001>;
          #size-cells = <0x00000000>;
          compatible = "allwinner,sun50i-twi";
          device_type = "twi2";
          reg = <0x00000000 0x05002800 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000008 0x00000004>;
          clocks = <0x00000002 0x0000004b>;
          clock-names = "bus";
          resets = <0x00000002 0x00000019>;
          dmas = <0x00000035 0x0000002d 0x00000035 0x0000002d>;
          dma-names = "tx", "rx";
          status = "disabled";
          clock-frequency = <0x00061a80>;
          pinctrl-0 = <0x0000003a>;
          pinctrl-1 = <0x0000003b>;
          pinctrl-names = "default", "sleep";
          twi_drv_used = <0x00000001>;
          phandle = <0x0000009c>;
          };
        twi@5002c00
          {
          #address-cells = <0x00000001>;
          #size-cells = <0x00000000>;
          compatible = "allwinner,sun50i-twi";
          device_type = "twi3";
          reg = <0x00000000 0x05002c00 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000009 0x00000004>;
          clocks = <0x00000002 0x0000004c>;
          clock-names = "bus";
          resets = <0x00000002 0x0000001a>;
          dmas = <0x00000035 0x0000002e 0x00000035 0x0000002e>;
          dma-names = "tx", "rx";
          status = "disabled";
          clock-frequency = <0x00061a80>;
          pinctrl-0 = <0x0000003c>;
          pinctrl-1 = <0x0000003d>;
          pinctrl-names = "default", "sleep";
          twi_drv_used = <0x00000001>;
          phandle = <0x0000009d>;
          };
        twi@5003000
          {
          #address-cells = <0x00000001>;
          #size-cells = <0x00000000>;
          compatible = "allwinner,sun50i-twi";
          device_type = "twi4";
          reg = <0x00000000 0x05003000 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x0000000a 0x00000004>;
          clocks = <0x00000002 0x0000004d>;
          clock-names = "bus";
          resets = <0x00000002 0x0000001b>;
          dmas = <0x00000035 0x0000002f 0x00000035 0x0000002f>;
          dma-names = "tx", "rx";
          status = "disabled";
          clock-frequency = <0x00061a80>;
          pinctrl-0 = <0x0000003e>;
          pinctrl-1 = <0x0000003f>;
          pinctrl-names = "default", "sleep";
          twi_drv_used = <0x00000001>;
          phandle = <0x0000009e>;
          };
        twi@7081400
          {
          #address-cells = <0x00000001>;
          #size-cells = <0x00000000>;
          compatible = "allwinner,sun50i-twi";
          device_type = "twi5";
          reg = <0x00000000 0x07081400 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000069 0x00000004>;
          clocks = <0x0000000d 0x00000005>;
          clock-names = "bus";
          resets = <0x0000000d 0x00000001>;
          dmas = <0x00000035 0x00000030 0x00000035 0x00000030>;
          dma-names = "tx", "rx";
          status = "okay";
          clock-frequency = <0x00061a80>;
          pinctrl-0 = <0x00000040>;
          pinctrl-1 = <0x00000041>;
          pinctrl-names = "default", "sleep";
          no_suspend = <0x00000001>;
          twi_drv_used = <0x00000000>;
          phandle = <0x0000009f>;
          pmu
            {
            compatible = "x-powers,axp1530";
            reg = <0x00000036>;
            wakeup-source;
            phandle = <0x000000a0>;
            standby_param
              {
              vcc-dram = <0x00000004>;
              phandle = <0x000000a1>;
              };
            regulators
              {
              dcdc1
                {
                regulator-name = "axp1530-dcdc1";
                regulator-min-microvolt = <0x0007a120>;
                regulator-max-microvolt = <0x0033e140>;
                regulator-step-delay-us = <0x00000019>;
                regulator-final-delay-us = <0x00000032>;
                regulator-always-on;
                phandle = <0x00000060>;
                };
              dcdc2
                {
                regulator-name = "axp1530-dcdc2";
                regulator-min-microvolt = <0x0007a120>;
                regulator-max-microvolt = <0x00177fa0>;
                regulator-step-delay-us = <0x00000019>;
                regulator-final-delay-us = <0x00000032>;
                regulator-ramp-delay = <0x000000c8>;
                regulator-always-on;
                phandle = <0x00000005>;
                };
              dcdc3
                {
                regulator-name = "axp1530-dcdc3";
                regulator-min-microvolt = <0x0007a120>;
                regulator-max-microvolt = <0x001c1380>;
                regulator-step-delay-us = <0x00000019>;
                regulator-final-delay-us = <0x00000032>;
                regulator-always-on;
                phandle = <0x000000a2>;
                };
              ldo1
                {
                regulator-name = "axp1530-aldo1";
                regulator-min-microvolt = <0x0007a120>;
                regulator-max-microvolt = <0x003567e0>;
                regulator-step-delay-us = <0x00000019>;
                regulator-final-delay-us = <0x00000032>;
                regulator-always-on;
                phandle = <0x0000001d>;
                };
              ldo2
                {
                regulator-name = "axp1530-dldo1";
                regulator-min-microvolt = <0x0007a120>;
                regulator-max-microvolt = <0x003567e0>;
                regulator-step-delay-us = <0x00000019>;
                regulator-final-delay-us = <0x00000032>;
                regulator-always-on;
                phandle = <0x0000001c>;
                };
              };
            };
          };
        spi@5010000
          {
          #address-cells = <0x00000001>;
          #size-cells = <0x00000000>;
          compatible = "allwinner,sun50i-spi";
          device_type = "spi0";
          reg = <0x00000000 0x05010000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x0000000c 0x00000004>;
          clocks = <0x00000002 0x00000004 0x00000002 0x0000004f 0x00000002 0x00000051>;
          clock-names = "pll", "mod", "bus";
          resets = <0x00000002 0x0000001d>;
          clock-frequency = <0x05f5e100>;
          spi0_cs_number = <0x00000001>;
          spi0_cs_bitmap = <0x00000001>;
          dmas = <0x00000035 0x00000016 0x00000035 0x00000016>;
          dma-names = "tx", "rx";
          status = "disabled";
          spi_slave_mode = <0x00000000>;
          pinctrl-names = "default", "sleep";
          phandle = <0x000000a3>;
          };
        spi@5011000
          {
          #address-cells = <0x00000001>;
          #size-cells = <0x00000000>;
          compatible = "allwinner,sun50i-spi";
          device_type = "spi1";
          reg = <0x00000000 0x05011000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x0000000d 0x00000004>;
          clocks = <0x00000002 0x00000004 0x00000002 0x00000050 0x00000002 0x00000052>;
          clock-names = "pll", "mod", "bus";
          resets = <0x00000002 0x0000001e>;
          clock-frequency = <0x05f5e100>;
          spi1_cs_number = <0x00000001>;
          spi1_cs_bitmap = <0x00000001>;
          dmas = <0x00000035 0x00000017 0x00000035 0x00000017>;
          dma-names = "tx", "rx";
          status = "disabled";
          spi_slave_mode = <0x00000000>;
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x00000042 0x00000043>;
          pinctrl-1 = <0x00000044>;
          phandle = <0x000000a4>;
          spi_board1@0
            {
            device_type = "spi_board1";
            compatible = "rohm,dh2228fv";
            spi-max-frequency = <0x05f5e100>;
            reg = <0x00000000>;
            spi-rx-bus-width = <0x00000001>;
            spi-tx-bus-width = <0x00000001>;
            status = "okay";
            };
          };
        thermal-sensor@5070400
          {
          compatible = "allwinner,sun50iw9p1-ths";
          reg = <0x00000000 0x05070400 0x00000000 0x00000400>;
          clocks = <0x00000002 0x00000059>;
          clock-names = "bus";
          resets = <0x00000002 0x00000023>;
          nvmem-cells = <0x00000045>;
          nvmem-cell-names = "calibration";
          #thermal-sensor-cells = <0x00000001>;
          phandle = <0x00000071>;
          };
        gpadc@5070000
          {
          compatible = "allwinner,sunxi-gpadc";
          reg = <0x00000000 0x05070000 0x00000000 0x000003ff>;
          interrupts = <0x00000000 0x00000012 0x00000004>;
          clocks = <0x00000002 0x00000058>;
          clock-names = "bus";
          resets = <0x00000002 0x00000022>;
          status = "disabled";
          phandle = <0x000000a5>;
          };
        keyboard@5070800
          {
          compatible = "allwinner,keyboard_1350mv";
          reg = <0x00000000 0x05070800 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x00000014 0x00000001>;
          clocks = <0x00000002 0x00000074>;
          resets = <0x00000002 0x00000035>;
          status = "disabled";
          phandle = <0x000000a6>;
          };
        codec@5096000
          {
          #sound-dai-cells = <0x00000000>;
          compatible = "allwinner,sunxi-snd-codec";
          reg = <0x00000000 0x05096000 0x00000000 0x0000031c>;
          resets = <0x00000002 0x00000026>;
          clocks = <0x00000002 0x00000013 0x00000002 0x0000005e 0x00000002 0x00000060>;
          clock-names = "clk_pll_audio_4x", "clk_audio", "clk_bus_audio";
          status = "okay";
          lineout_vol = <0x0000001f>;
          tx_hub_en;
          phandle = <0x00000047>;
          };
        codec_plat
          {
          #sound-dai-cells = <0x00000000>;
          compatible = "allwinner,sunxi-snd-plat-aaudio";
          playback_cma = <0x00000080>;
          capture_cma = <0x00000080>;
          tx_fifo_size = <0x00000080>;
          rx_fifo_size = <0x00000080>;
          dac_txdata = <0x05096020>;
          adc_txdata = <0x05096040>;
          dmas = <0x00000035 0x00000006 0x00000035 0x00000006>;
          dma-names = "tx", "rx";
          status = "okay";
          phandle = <0x00000046>;
          };
        codec_mach
          {
          compatible = "allwinner,sunxi-snd-mach";
          soundcard-mach,name = "audiocodec";
          soundcard-mach,playback-only;
          soundcard-mach,pin-switches = "LINEOUT";
          soundcard-mach,routing = "LINEOUT", "LINEOUTL", "LINEOUT", "LINEOUTR";
          status = "okay";
          phandle = <0x000000a7>;
          soundcard-mach,cpu
            {
            sound-dai = <0x00000046>;
            };
          soundcard-mach,codec
            {
            sound-dai = <0x00000047>;
            soundcard-mach,pll-fs = <0x00000004>;
            };
          };
        spdif_plat@5093000
          {
          #sound-dai-cells = <0x00000000>;
          compatible = "allwinner,sunxi-snd-plat-spdif";
          reg = <0x00000000 0x05093000 0x00000000 0x00000040>;
          resets = <0x00000002 0x00000024>;
          clocks = <0x00000002 0x00000013 0x00000002 0x0000005a 0x00000002 0x0000005b>;
          clock-names = "clk_pll_audio_4x", "clk_spdif", "clk_bus_spdif";
          pll-fs = <0x00000004>;
          dmas = <0x00000035 0x00000002 0x00000035 0x00000002>;
          dma-names = "tx", "rx";
          playback_cma = <0x00000080>;
          capture_cma = <0x00000080>;
          tx_fifo_size = <0x00000080>;
          rx_fifo_size = <0x00000040>;
          status = "okay";
          pinctrl_used;
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x00000048>;
          pinctrl-1 = <0x00000049>;
          tx_hub_en;
          phandle = <0x0000004a>;
          };
        spdif_mach
          {
          compatible = "allwinner,sunxi-snd-mach";
          soundcard-mach,name = "sndspdif";
          status = "okay";
          phandle = <0x000000a8>;
          soundcard-mach,cpu
            {
            sound-dai = <0x0000004a>;
            soundcard-mach,pll-fs = <0x00000004>;
            };
          soundcard-mach,codec
            {
            };
          };
        ahub_dam_plat@5097000
          {
          #sound-dai-cells = <0x00000000>;
          compatible = "allwinner,sunxi-snd-plat-ahub_dam";
          reg = <0x00000000 0x05097000 0x00000000 0x00000aec>;
          resets = <0x00000002 0x00000027>;
          clocks = <0x00000002 0x00000011 0x00000002 0x00000013 0x00000002 0x00000061 0x00000002 0x00000062>;
          clock-names = "clk_pll_audio", "clk_pll_audio_4x", "clk_audio_hub", "clk_bus_audio_hub";
          status = "okay";
          phandle = <0x0000004b>;
          };
        ahub_dam_mach
          {
          compatible = "allwinner,sunxi-snd-mach";
          soundcard-mach,name = "ahubdam";
          status = "okay";
          phandle = <0x000000a9>;
          soundcard-mach,cpu
            {
            sound-dai = <0x0000004b>;
            };
          soundcard-mach,codec
            {
            };
          };
        ahub0_plat
          {
          #sound-dai-cells = <0x00000000>;
          compatible = "allwinner,sunxi-snd-plat-ahub";
          apb_num = <0x00000000>;
          dmas = <0x00000035 0x00000003 0x00000035 0x00000003>;
          dma-names = "tx", "rx";
          playback_cma = <0x00000080>;
          capture_cma = <0x00000080>;
          tx_fifo_size = <0x00000080>;
          rx_fifo_size = <0x00000080>;
          status = "disabled";
          tdm_num = <0x00000000>;
          tx_pin = <0x00000000>;
          rx_pin = <0x00000000>;
          phandle = <0x00000051>;
          };
        ahub1_plat
          {
          #sound-dai-cells = <0x00000000>;
          compatible = "allwinner,sunxi-snd-plat-ahub";
          apb_num = <0x00000001>;
          dmas = <0x00000035 0x00000004 0x00000035 0x00000004>;
          dma-names = "tx", "rx";
          playback_cma = <0x00000080>;
          capture_cma = <0x00000080>;
          tx_fifo_size = <0x00000080>;
          rx_fifo_size = <0x00000080>;
          status = "okay";
          tdm_num = <0x00000001>;
          tx_pin = <0x00000000>;
          rx_pin = <0x00000000>;
          dai_type = "hdmi";
          phandle = <0x00000053>;
          };
        ahub2_plat
          {
          #sound-dai-cells = <0x00000000>;
          compatible = "allwinner,sunxi-snd-plat-ahub";
          apb_num = <0x00000002>;
          dmas = <0x00000035 0x00000005 0x00000035 0x00000005>;
          dma-names = "tx", "rx";
          playback_cma = <0x00000080>;
          capture_cma = <0x00000080>;
          tx_fifo_size = <0x00000080>;
          rx_fifo_size = <0x00000080>;
          status = "okay";
          tdm_num = <0x00000002>;
          tx_pin = <0x00000000>;
          rx_pin = <0x00000000>;
          pinctrl_used;
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x0000004c 0x0000004d 0x0000004e>;
          pinctrl-1 = <0x0000004f>;
          phandle = <0x00000055>;
          };
        ahub3_plat
          {
          #sound-dai-cells = <0x00000000>;
          compatible = "allwinner,sunxi-snd-plat-ahub";
          apb_num = <0x00000002>;
          dmas = <0x00000035 0x00000005 0x00000035 0x00000005>;
          dma-names = "tx", "rx";
          playback_cma = <0x00000080>;
          capture_cma = <0x00000080>;
          tx_fifo_size = <0x00000080>;
          rx_fifo_size = <0x00000080>;
          status = "disabled";
          tdm_num = <0x00000003>;
          tx_pin = <0x00000000>;
          rx_pin = <0x00000000>;
          phandle = <0x00000057>;
          };
        ahub0_mach
          {
          compatible = "allwinner,sunxi-snd-mach";
          soundcard-mach,name = "ahubi2s0";
          status = "disabled";
          soundcard-mach,format = "i2s";
          soundcard-mach,frame-master = <0x00000050>;
          soundcard-mach,bitclock-master = <0x00000050>;
          soundcard-mach,slot-num = <0x00000002>;
          soundcard-mach,slot-width = <0x00000020>;
          phandle = <0x000000aa>;
          soundcard-mach,cpu
            {
            sound-dai = <0x00000051>;
            soundcard-mach,pll-fs = <0x00000004>;
            soundcard-mach,mclk-fs = <0x00000100>;
            phandle = <0x00000050>;
            };
          soundcard-mach,codec
            {
            phandle = <0x000000ab>;
            };
          };
        ahub1_mach
          {
          compatible = "allwinner,sunxi-snd-mach";
          soundcard-mach,name = "ahubhdmi";
          status = "okay";
          soundcard-mach,format = "i2s";
          soundcard-mach,frame-master = <0x00000052>;
          soundcard-mach,bitclock-master = <0x00000052>;
          soundcard-mach,slot-num = <0x00000002>;
          soundcard-mach,slot-width = <0x00000020>;
          phandle = <0x000000ac>;
          soundcard-mach,cpu
            {
            sound-dai = <0x00000053>;
            soundcard-mach,pll-fs = <0x00000004>;
            soundcard-mach,mclk-fs = <0x00000000>;
            phandle = <0x00000052>;
            };
          soundcard-mach,codec
            {
            phandle = <0x000000ad>;
            };
          };
        ahub2_mach
          {
          compatible = "allwinner,sunxi-snd-mach";
          soundcard-mach,name = "ahubi2s2";
          status = "okay";
          soundcard-mach,format = "i2s";
          soundcard-mach,frame-master = <0x00000054>;
          soundcard-mach,bitclock-master = <0x00000054>;
          soundcard-mach,slot-num = <0x00000002>;
          soundcard-mach,slot-width = <0x00000020>;
          phandle = <0x000000ae>;
          soundcard-mach,cpu
            {
            sound-dai = <0x00000055>;
            soundcard-mach,pll-fs = <0x00000004>;
            soundcard-mach,mclk-fs = <0x00000100>;
            phandle = <0x00000054>;
            };
          soundcard-mach,codec
            {
            phandle = <0x000000af>;
            };
          };
        ahub3_mach
          {
          compatible = "allwinner,sunxi-snd-mach";
          soundcard-mach,name = "ahubi2s3";
          status = "disabled";
          soundcard-mach,format = "i2s";
          soundcard-mach,frame-master = <0x00000056>;
          soundcard-mach,bitclock-master = <0x00000056>;
          soundcard-mach,slot-num = <0x00000002>;
          soundcard-mach,slot-width = <0x00000020>;
          phandle = <0x000000b0>;
          soundcard-mach,cpu
            {
            sound-dai = <0x00000057>;
            soundcard-mach,pll-fs = <0x00000004>;
            soundcard-mach,mclk-fs = <0x00000100>;
            phandle = <0x00000056>;
            };
          soundcard-mach,codec
            {
            phandle = <0x000000b1>;
            };
          };
        spdif@5094000
          {
          #sound-dai-cells = <0x00000000>;
          compatible = "allwinner,sunxi-spdif";
          reg = <0x00000000 0x05094000 0x00000000 0x00000040>;
          clocks = <0x00000002 0x00000011 0x00000002 0x0000005a 0x00000002 0x0000005b>;
          clock-names = "pll_audio", "spdif", "spdif_bus";
          resets = <0x00000002 0x00000024>;
          clk_parent = <0x00000001>;
          playback_cma = <0x00000080>;
          capture_cma = <0x00000080>;
          device_type = "spdif";
          dmas = <0x00000035 0x00000002 0x00000035 0x00000002>;
          dma-names = "tx", "rx";
          status = "disabled";
          phandle = <0x00000058>;
          };
        soundspdif
          {
          compatible = "sunxi,simple-audio-card";
          simple-audio-card,name = "sndspdif";
          status = "disabled";
          phandle = <0x000000b2>;
          simple-audio-card,cpu
            {
            sound-dai = <0x00000058>;
            };
          simple-audio-card,codec
            {
            };
          };
        dmic@5095000
          {
          #sound-dai-cells = <0x00000000>;
          compatible = "allwinner,sunxi-dmic";
          reg = <0x00000000 0x05095000 0x00000000 0x00000050>;
          clocks = <0x00000002 0x00000011 0x00000002 0x0000005c 0x00000002 0x0000005d>;
          clock-names = "pll_audio", "dmic", "dmic_bus";
          resets = <0x00000002 0x00000025>;
          clk_parent = <0x00000001>;
          capture_cma = <0x00000100>;
          data_vol = <0x000000b0>;
          dmic_rxsync_en = <0x00000000>;
          rx_chmap = <0x76543210>;
          device_type = "dmic";
          dmas = <0x00000035 0x00000007>;
          dma-names = "rx";
          status = "disabled";
          phandle = <0x00000059>;
          };
        dmic_codec
          {
          #sound-dai-cells = <0x00000000>;
          compatible = "dmic-codec";
          num-channels = <0x00000008>;
          status = "disabled";
          phandle = <0x0000005a>;
          };
        sounddmic
          {
          compatible = "sunxi,simple-audio-card";
          simple-audio-card,name = "snddmic";
          status = "disabled";
          phandle = <0x000000b3>;
          simple-audio-card,cpu
            {
            sound-dai = <0x00000059>;
            };
          simple-audio-card,codec
            {
            sound-dai = <0x0000005a>;
            };
          };
        gpio_para
          {
          device_type = "gpio_para";
          compatible = "allwinner,sunxi-init-gpio";
          status = "okay";
          gpio_num = <0x00000002>;
          gpio_pin_1 = <0x00000023 0x00000007 0x00000006 0x00000000>;
          gpio_pin_2 = <0x00000023 0x00000007 0x00000007 0x00000000>;
          normal_led = "gpio_pin_1";
          standby_led = "gpio_pin_2";
          easy_light_used = <0x00000001>;
          normal_led_light = <0x00000000>;
          standby_led_light = <0x00000001>;
          phandle = <0x000000b4>;
          };
        eth@5020000
          {
          compatible = "allwinner,sunxi-gmac";
          reg = <0x00000000 0x05020000 0x00000000 0x00010000 0x00000000 0x03000030 0x00000000 0x00000004>;
          interrupts = <0x00000000 0x0000000e 0x00000004>;
          interrupt-names = "gmacirq";
          clocks = <0x00000002 0x00000054 0x00000002 0x00000053>;
          clock-names = "gmac", "ephy";
          resets = <0x00000002 0x0000001f>;
          device_type = "gmac0";
          phy-mode = "rgmii";
          phy-rst;
          gmac-power0;
          gmac-power1;
          gmac-power2;
          status = "disabled";
          use_ephy25m = <0x00000001>;
          pinctrl-0 = <0x0000005b>;
          pinctrl-1 = <0x0000005c>;
          pinctrl-names = "default", "sleep";
          tx-delay = <0x00000007>;
          rx-delay = <0x0000001f>;
          phandle = <0x000000b5>;
          };
        eth@5030000
          {
          compatible = "allwinner,sunxi-gmac";
          reg = <0x00000000 0x05030000 0x00000000 0x00010000 0x00000000 0x03000034 0x00000000 0x00000004>;
          interrupts = <0x00000000 0x0000000f 0x00000004>;
          interrupt-names = "gmacirq";
          clocks = <0x00000002 0x00000055>;
          clock-names = "gmac";
          resets = <0x00000002 0x00000020>;
          device_type = "gmac1";
          phy-mode = "rmii";
          phy-rst;
          gmac-power0;
          gmac-power1;
          gmac-power2;
          status = "okay";
          pinctrl-0 = <0x0000005d>;
          pinctrl-1 = <0x0000005e>;
          pinctrl-names = "default", "sleep";
          tx-delay = <0x00000007>;
          rx-delay = <0x0000001f>;
          phandle = <0x000000b6>;
          };
        usbc0@0
          {
          device_type = "usbc0";
          compatible = "allwinner,sunxi-otg-manager";
          usb_port_type = <0x00000001>;
          usb_detect_type = <0x00000001>;
          usb_detect_mode = <0x00000000>;
          usb_id_gpio;
          usb_det_vbus_gpio;
          usb_drv_vbus_gpio;
          usb_host_init_state = <0x00000000>;
          usb_regulator_io = "nocare";
          usb_wakeup_suspend = <0x00000000>;
          usb_luns = <0x00000003>;
          usb_serial_unique = <0x00000000>;
          usb_serial_number = "20080411";
          rndis_wceis = <0x00000001>;
          wakeup-source;
          status = "okay";
          phandle = <0x000000b7>;
          };
        udc-controller@5100000
          {
          compatible = "allwinner,sunxi-udc";
          reg = <0x00000000 0x05100000 0x00000000 0x00001000 0x00000000 0x00000000 0x00000000 0x00000100>;
          interrupts = <0x00000000 0x00000019 0x00000004>;
          interrupt-parent = <0x00000007>;
          clocks = <0x00000002 0x00000073 0x00000002 0x00000064>;
          clock-names = "bus_otg", "phy";
          resets = <0x00000002 0x00000034 0x00000002 0x00000028>;
          reset-names = "otg", "phy";
          phandle = <0x000000b8>;
          };
        ehci0-controller@5101000
          {
          compatible = "allwinner,sunxi-ehci0";
          reg = <0x00000000 0x05101000 0x00000000 0x00000fff 0x00000000 0x00000000 0x00000000 0x00000100 0x00000000 0x05100000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x0000001a 0x00000004>;
          clocks = <0x00000002 0x0000006f 0x00000002 0x00000064>;
          clock-names = "bus_hci", "phy";
          resets = <0x00000002 0x00000030 0x00000002 0x00000028>;
          reset-names = "hci", "phy";
          hci_ctrl_no = <0x00000000>;
          drvvbus-supply = <0x0000005f>;
          status = "okay";
          phandle = <0x000000b9>;
          };
        ohci0-controller@5101400
          {
          compatible = "allwinner,sunxi-ohci0";
          reg = <0x00000000 0x05101400 0x00000000 0x00000fff 0x00000000 0x00000000 0x00000000 0x00000100 0x00000000 0x05100000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x0000001b 0x00000004>;
          clocks = <0x00000002 0x0000006b 0x00000002 0x00000063 0x00000002 0x00000064>;
          clock-names = "bus_hci", "ohci", "phy";
          resets = <0x00000002 0x0000002c 0x00000002 0x00000028>;
          reset-names = "hci", "phy";
          hci_ctrl_no = <0x00000000>;
          drvvbus-supply = <0x0000005f>;
          status = "okay";
          phandle = <0x000000ba>;
          };
        usbc1@0
          {
          device_type = "usbc1";
          usb_drv_vbus_gpio;
          usb_host_init_state = <0x00000001>;
          usb_regulatior_io = "nocare";
          usb_wakeup_suspend = <0x00000000>;
          wakeup-source;
          usb_regulator_io = "nocare";
          status = "okay";
          phandle = <0x000000bb>;
          };
        ehci1-controller@5200000
          {
          compatible = "allwinner,sunxi-ehci1";
          reg = <0x00000000 0x05200000 0x00000000 0x00000fff 0x00000000 0x00000000 0x00000000 0x00000100 0x00000000 0x05100000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x0000001c 0x00000004>;
          clocks = <0x00000002 0x00000070 0x00000002 0x00000066>;
          clock-names = "bus_hci", "phy";
          resets = <0x00000002 0x00000031 0x00000002 0x00000029>;
          reset-names = "hci", "phy";
          hci_ctrl_no = <0x00000001>;
          drvvbus-supply = <0x0000005f>;
          status = "okay";
          phandle = <0x000000bc>;
          };
        ohci1-controller@5200400
          {
          compatible = "allwinner,sunxi-ohci1";
          reg = <0x00000000 0x05200400 0x00000000 0x00000fff 0x00000000 0x00000000 0x00000000 0x00000100 0x00000000 0x05100000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x0000001d 0x00000004>;
          clocks = <0x00000002 0x0000006c 0x00000002 0x00000065 0x00000002 0x00000066>;
          clock-names = "bus_hci", "ohci", "phy";
          resets = <0x00000002 0x0000002d 0x00000002 0x00000029>;
          reset-names = "hci", "phy";
          hci_ctrl_no = <0x00000001>;
          drvvbus-supply = <0x0000005f>;
          status = "okay";
          phandle = <0x000000bd>;
          };
        usbc2@0
          {
          device_type = "usbc2";
          usb_drv_vbus_gpio;
          usb_host_init_state = <0x00000001>;
          usb_regulatior_io = "nocare";
          usb_wakeup_suspend = <0x00000000>;
          wakeup-source;
          usb_regulator_io = "nocare";
          status = "okay";
          phandle = <0x000000be>;
          };
        ehci2-controller@5310000
          {
          compatible = "allwinner,sunxi-ehci2";
          reg = <0x00000000 0x05310000 0x00000000 0x00000fff 0x00000000 0x00000000 0x00000000 0x00000100 0x00000000 0x05100000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x0000001e 0x00000004>;
          clocks = <0x00000002 0x00000071 0x00000002 0x00000068>;
          clock-names = "bus_hci", "phy";
          resets = <0x00000002 0x00000032 0x00000002 0x0000002a>;
          reset-names = "hci", "phy";
          hci_ctrl_no = <0x00000002>;
          drvvbus-supply = <0x0000005f>;
          status = "okay";
          phandle = <0x000000bf>;
          };
        ohci2-controller@5310400
          {
          compatible = "allwinner,sunxi-ohci2";
          reg = <0x00000000 0x05310400 0x00000000 0x00000fff 0x00000000 0x00000000 0x00000000 0x00000100 0x00000000 0x05100000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x0000001f 0x00000004>;
          clocks = <0x00000002 0x0000006d 0x00000002 0x00000067 0x00000002 0x00000068>;
          clock-names = "bus_hci", "ohci", "phy";
          resets = <0x00000002 0x0000002e 0x00000002 0x0000002a>;
          reset-names = "hci", "phy";
          hci_ctrl_no = <0x00000002>;
          drvvbus-supply = <0x0000005f>;
          status = "okay";
          phandle = <0x000000c0>;
          };
        usbc3@0
          {
          device_type = "usbc3";
          usb_drv_vbus_gpio;
          usb_host_init_state = <0x00000001>;
          usb_regulatior_io = "nocare";
          usb_wakeup_suspend = <0x00000000>;
          wakeup-source;
          usb_regulator_io = "nocare";
          status = "okay";
          phandle = <0x000000c1>;
          };
        ehci3-controller@5311000
          {
          compatible = "allwinner,sunxi-ehci3";
          reg = <0x00000000 0x05311000 0x00000000 0x00000fff 0x00000000 0x00000000 0x00000000 0x00000100 0x00000000 0x05100000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x00000020 0x00000004>;
          clocks = <0x00000002 0x00000072 0x00000002 0x0000006a>;
          clock-names = "bus_hci", "phy";
          resets = <0x00000002 0x00000033 0x00000002 0x0000002b>;
          reset-names = "hci", "phy";
          hci_ctrl_no = <0x00000003>;
          drvvbus-supply = <0x0000005f>;
          status = "okay";
          phandle = <0x000000c2>;
          };
        ohci3-controller@5311400
          {
          compatible = "allwinner,sunxi-ohci3";
          reg = <0x00000000 0x05311400 0x00000000 0x00000fff 0x00000000 0x00000000 0x00000000 0x00000100 0x00000000 0x05100000 0x00000000 0x00001000>;
          interrupts = <0x00000000 0x00000021 0x00000004>;
          clocks = <0x00000002 0x0000006e 0x00000002 0x00000069 0x00000002 0x0000006a>;
          clock-names = "bus_hci", "ohci", "phy";
          resets = <0x00000002 0x0000002f 0x00000002 0x0000002b>;
          reset-names = "hci", "phy";
          hci_ctrl_no = <0x00000003>;
          drvvbus-supply = <0x0000005f>;
          status = "okay";
          phandle = <0x000000c3>;
          };
        hdmi@6000000
          {
          compatible = "allwinner,sunxi-hdmi";
          reg = <0x00000000 0x06000000 0x00000000 0x00100000>;
          interrupts = <0x00000000 0x0000003f 0x00000004>;
          clocks = <0x00000002 0x00000079 0x00000002 0x00000075 0x00000002 0x00000076 0x00000002 0x00000078 0x00000002 0x0000008b 0x00000002 0x0000008a 0x00000002 0x0000007f>;
          clock-names = "clk_bus_hdmi", "clk_hdmi", "clk_ddc", "clk_cec", "clk_bus_hdcp", "clk_hdcp", "clk_tcon_tv";
          resets = <0x00000002 0x00000037 0x00000002 0x00000036 0x00000002 0x00000041>;
          reset-names = "rst_bus_sub", "rst_bus_main", "rst_bus_hdcp";
          assigned-clocks = <0x00000002 0x00000075 0x00000002 0x0000008a>;
          assigned-clock-parents = <0x00000002 0x0000000d 0x00000002 0x00000006>;
          assigned-clock-rates = <0x00000000 0x00000000>;
          status = "okay";
          hdmi_used = <0x00000001>;
          aldo1-supply = <0x0000001d>;
          dcdc1-supply = <0x00000060>;
          hdmi_power_cnt = <0x00000002>;
          hdmi_power0 = "aldo1";
          hdmi_power1 = "dcdc1";
          hdmi_hdcp_enable = <0x00000001>;
          hdmi_hdcp22_enable = <0x00000001>;
          hdmi_cts_compatibility = <0x00000000>;
          hdmi_cec_support = <0x00000001>;
          hdmi_cec_super_standby = <0x00000000>;
          ddc_en_io_ctrl = <0x00000000>;
          power_io_ctrl = <0x00000000>;
          phandle = <0x000000c4>;
          };
        interrupt-controller@7010320
          {
          compatible = "allwinner,sun8i-nmi";
          interrupt-controller;
          #interrupt-cells = <0x00000002>;
          reg = <0x00000000 0x07010320 0x00000000 0x0000000c>;
          interrupts = <0x00000000 0x00000067 0x00000004>;
          pad-control-v1 = <0x07000208>;
          phandle = <0x000000c5>;
          };
        s_cir@7040000
          {
          compatible = "allwinner,s_cir";
          reg = <0x00000000 0x07040000 0x00000000 0x00000400>;
          interrupts = <0x00000000 0x0000006a 0x00000004>;
          clocks = <0x0000000d 0x00000008 0x0000000a 0x0000000d 0x00000007>;
          clock-names = "bus", "pclk", "mclk";
          resets = <0x0000000d 0x00000003>;
          status = "okay";
          s_cir0_used = <0x00000001>;
          pinctrl-names = "default", "sleep";
          pinctrl-0 = <0x00000061>;
          pinctrl-1 = <0x00000062>;
          ir_power_key_code0 = <0x0000004d>;
          ir_addr_code0 = <0x00004040>;
          ir_power_key_code1 = <0x00000051>;
          ir_addr_code1 = <0x00007f80>;
          wakeup-source;
          phandle = <0x000000c6>;
          };
        rfkill
          {
          compatible = "allwinner,sunxi-rfkill";
          status = "okay";
          chip_en;
          power_en;
          pinctrl-0;
          pinctrl-names;
          clocks;
          phandle = <0x000000c7>;
          wlan
            {
            compatible = "allwinner,sunxi-wlan";
            wlan_busnum = <0x00000001>;
            wlan_power;
            wlan_regon = <0x00000023 0x00000006 0x00000012 0x00000000>;
            wlan_hostwake = <0x00000023 0x00000006 0x0000000f 0x00000000>;
            wakeup-source;
            phandle = <0x000000c8>;
            };
          bt
            {
            compatible = "allwinner,sunxi-bt";
            bt_power;
            bt_rst_n = <0x00000023 0x00000006 0x00000013 0x00000001>;
            phandle = <0x000000c9>;
            };
          };
        addr_mgt
          {
          addr_eth = "04:82:21:10:33:AA";
          compatible = "allwinner,sunxi-addr_mgt";
          status = "okay";
          type_addr_wifi = <0x00000000>;
          type_addr_bt = <0x00000000>;
          type_addr_eth = <0x00000000>;
          phandle = <0x000000ca>;
          };
        btlpm
          {
          compatible = "allwinner,sunxi-btlpm";
          status = "okay";
          uart_index = <0x00000001>;
          bt_wake = <0x00000023 0x00000006 0x00000011 0x00000000>;
          bt_hostwake = <0x00000023 0x00000006 0x00000010 0x00000000>;
          wakeup-source;
          phandle = <0x000000cb>;
          };
        card0_boot_para@2
          {
          reg = <0x00000000 0x00000002 0x00000000 0x00000000>;
          device_type = "card0_boot_para";
          card_ctrl = <0x00000000>;
          card_high_speed = <0x00000001>;
          card_line = <0x00000004>;
          pinctrl-0 = <0x0000001e>;
          };
        card2_boot_para@3
          {
          reg = <0x00000000 0x00000003 0x00000000 0x00000000>;
          device_type = "card2_boot_para";
          card_ctrl = <0x00000002>;
          card_high_speed = <0x00000001>;
          card_line = <0x00000008>;
          pinctrl-0 = <0x00000019 0x0000001a>;
          sdc_ex_dly_used = <0x00000002>;
          sdc_io_1v8 = <0x00000001>;
          sdc_type = "tm4";
          };
        pll_video2
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,pll-clock";
          lock-mode = "new";
          assigned-clocks = <0x00000063>;
          clock-output-names = "pll_video2";
          phandle = <0x00000063>;
          };
        pll_de
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,pll-clock";
          assigned-clocks = <0x00000064>;
          assigned-clock-rates = <0x297c1e00>;
          lock-mode = "new";
          clock-output-names = "pll_de";
          phandle = <0x00000064>;
          };
        de
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,periph-clock";
          assigned-clock-parents = <0x00000064>;
          assigned-clock-rates = <0x297c1e00>;
          assigned-clocks = <0x00000065>;
          clock-output-names = "de";
          phandle = <0x00000065>;
          };
        display_top
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,periph-clock";
          clock-output-names = "display_top";
          phandle = <0x0000006d>;
          };
        tcon_lcd
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,periph-clock";
          clock-output-names = "tcon_lcd";
          phandle = <0x0000006e>;
          };
        tcon_lcd1
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,periph-clock";
          clock-output-names = "tcon_lcd1";
          phandle = <0x0000006f>;
          };
        tcon_tv
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,periph-clock";
          assigned-clock-parents = <0x00000063>;
          assigned-clocks = <0x00000066>;
          clock-output-names = "tcon_tv";
          phandle = <0x00000066>;
          };
        tcon_tv1
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,periph-clock";
          clock-output-names = "tcon_tv1";
          phandle = <0x00000070>;
          };
        lvds
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,periph-clock";
          clock-output-names = "lvds";
          assigned-clocks = <0x00000067>;
          phandle = <0x00000067>;
          };
        hdmi
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,periph-clock";
          assigned-clock-parents = <0x00000063>;
          assigned-clocks = <0x00000068>;
          clock-output-names = "hdmi";
          phandle = <0x00000068>;
          };
        hdmi_slow
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,periph-clock";
          assigned-clocks = <0x00000069>;
          clock-output-names = "hdmi_slow";
          phandle = <0x00000069>;
          };
        hdmi_cec
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,periph-clock";
          assigned-clocks = <0x0000006a>;
          clock-output-names = "hdmi_cec";
          phandle = <0x0000006a>;
          };
        hdmi_hdcp
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,periph-clock";
          assigned-clock-parents = <0x0000006b>;
          assigned-clocks = <0x0000006c>;
          clock-output-names = "hdmi_hdcp";
          phandle = <0x0000006c>;
          };
        pll_periph1
          {
          #clock-cells = <0x00000000>;
          compatible = "allwinner,pll-clock";
          assigned-clocks = <0x0000006b>;
          assigned-clock-rates = "#-F";
          lock-mode = "new";
          clock-output-names = "pll_periph1";
          phandle = <0x0000006b>;
          };
        auto_print@54321
          {
          reg = <0x00000000 0x00054321 0x00000000 0x00000000>;
          device_type = "auto_print";
          status = "disabled";
          };
        fd650
          {
          compatible = "oranth,fd650";
          status = "okay";
          fd650_gpio_clk = <0x00000023 0x00000008 0x0000000b 0x00000000>;
          fd650_gpio_dat = <0x00000023 0x00000008 0x0000000c 0x00000000>;
          };
        };
      uboot_disp@1000000
        {
        compatible = "allwinner,sunxi-disp";
        reg = * 0xbbe5d4f8 [0x00000060];
        interrupts = <0x00000000 0x00000058 0x00000004 0x00000000 0x00000040 0x00000004 0x00000000 0x00000041 0x00000004 0x00000000 0x00000042 0x00000004 0x00000000 0x00000043 0x00000004>;
        clocks = <0x00000065 0x0000006d 0x0000006e 0x0000006f 0x00000066 0x00000070 0x00000067>;
        boot_disp = <0x00000000>;
        fb_base = <0x00000000>;
        phandle = <0x000000cc>;
        };
      uboot_hdmi@6000000
        {
        compatible = "allwinner,sunxi-hdmi";
        reg = <0x00000000 0x06000000 0x00000000 0x00100000>;
        interrupts = <0x00000000 0x0000003f 0x00000004>;
        clocks = <0x00000068 0x00000069 0x0000006c 0x0000006a>;
        phandle = <0x000000cd>;
        };
      thermal-zones
        {
        cpu_thermal_zone
          {
          polling-delay-passive = <0x000001f4>;
          polling-delay = <0x000003e8>;
          thermal-sensors = <0x00000071 0x00000002>;
          sustainable-power = <0x0000039f>;
          trips
            {
            phandle = <0x000000ce>;
            trip-point@0
              {
              temperature = <0x00011170>;
              type = "passive";
              hysteresis = <0x00000000>;
              phandle = <0x000000cf>;
              };
            trip-point@1
              {
              temperature = <0x00015f90>;
              type = "passive";
              hysteresis = <0x00000000>;
              phandle = <0x00000072>;
              };
            cpu_crit@0
              {
              temperature = <0x0001c138>;
              type = "critical";
              hysteresis = <0x00000000>;
              phandle = <0x000000d0>;
              };
            };
          cooling-maps
            {
            map0
              {
              trip = <0x00000072>;
              cooling-device = <0x00000073 0xffffffff 0xffffffff>;
              contribution = <0x00000400>;
              };
            map1
              {
              trip = <0x00000072>;
              cooling-device = <0x00000074 0xffffffff 0xffffffff>;
              contribution = <0x00000400>;
              };
            };
          };
        ddr_thermal_zone
          {
          polling-delay-passive = <0x00000000>;
          polling-delay = <0x00000000>;
          thermal-sensors = <0x00000071 0x00000003>;
          };
        gpu_thermal_zone
          {
          polling-delay-passive = <0x000001f4>;
          polling-delay = <0x000003e8>;
          thermal-sensors = <0x00000071 0x00000000>;
          sustainable-power = <0x0000044c>;
          };
        ve_thermal_zone
          {
          polling-delay-passive = <0x00000000>;
          polling-delay = <0x00000000>;
          thermal-sensors = <0x00000071 0x00000001>;
          };
        };
      usb0-drvvvbus
        {
        compatible = "regulator-fixed";
        regulator-name = "usb0-drvvbus";
        regulator-min-microvolt = <0x004c4b40>;
        regulator-max-microvolt = <0x004c4b40>;
        regulator-enable-ramp-delay = <0x000003e8>;
        gpio = <0x00000023 0x00000007 0x00000008 0x00000000>;
        enable-active-high;
        phandle = <0x0000005f>;
        };
      __symbols__
        {
        cpu0 = "/ cpus/ cpu@0";
        CPU_SLEEP = "/ cpus/ idle-states/ cpu-sleep";
        cpu_opp_table = "/ cpu-opp-table";
        dump_reg = "/ dump-reg@20000";
        iosc = "/ internal-osc-clk";
        dcxo24M = "/ dcxo24M-clk";
        osc32k = "/ osc32k-clk";
        gic = "/ interrupt-controller@3021000";
        wakeupgen = "/ interrupt-controller@0";
        reg_pio1_8 = "/ pio-18";
        reg_pio3_3 = "/ pio-33";
        dram = "/ dram";
        soc = "/ soc@3000000";
        disp = "/ soc@3000000/ disp@1000000";
        ve = "/ soc@3000000/ ve@1c0e000";
        ve1 = "/ soc@3000000/ ve1@1c0e000";
        g2d = "/ soc@3000000/ g2d@1480000";
        di = "/ soc@3000000/ deinterlace@1420000";
        gpu = "/ soc@3000000/ gpu@1800000";
        ipa_dvfs = "/ soc@3000000/ gpu@1800000/ ipa_dvfs";
        lcd0 = "/ soc@3000000/ lcd0@1c0c000";
        tv0 = "/ soc@3000000/ tv0@6520000";
        ccu = "/ soc@3000000/ ccu@3001000";
        rtc_ccu = "/ soc@3000000/ rtc_ccu@7000000";
        rtc = "/ soc@3000000/ rtc@7000000";
        r_ccu = "/ soc@3000000/ r_ccu@7010000";
        dma = "/ soc@3000000/ dma-controller@3002000";
        sram_ctrl = "/ soc@3000000/ sram_ctrl@3000000";
        speedbin_efuse = "/ soc@3000000/ sid@3006000/ speed@00";
        ths_calib = "/ soc@3000000/ sid@3006000/ calib@14";
        tvout = "/ soc@3000000/ sid@3006000/ tvout@2e";
        i_cpu_efuse = "/ soc@3000000/ sid@3006000/ i-cpu@28";
        cryptoengine = "/ soc@3000000/ ce@1904000";
        soc_timer0 = "/ soc@3000000/ timer@3009000";
        wdt = "/ soc@3000000/ watchdog@30090a0";
        pwm = "/ soc@3000000/ pwm@300a000";
        pwm0 = "/ soc@3000000/ pwm0@300a010";
        pwm1 = "/ soc@3000000/ pwm1@300a011";
        pwm2 = "/ soc@3000000/ pwm2@300a012";
        pwm3 = "/ soc@3000000/ pwm3@300a013";
        pwm4 = "/ soc@3000000/ pwm4@300a014";
        pwm5 = "/ soc@3000000/ pwm5@300a015";
        ac200 = "/ soc@3000000/ ac200";
        pio = "/ soc@3000000/ pinctrl@300b000";
        uart0_ph_pins = "/ soc@3000000/ pinctrl@300b000/ uart0-ph-pins";
        uart0_ph_sleep = "/ soc@3000000/ pinctrl@300b000/ uart0-ph-sleep";
        sdc0_pins_a = "/ soc@3000000/ pinctrl@300b000/ sdc0@0";
        sdc0_pins_b = "/ soc@3000000/ pinctrl@300b000/ sdc0@1";
        sdc0_pins_c = "/ soc@3000000/ pinctrl@300b000/ sdc0@2";
        sdc0_pins_d = "/ soc@3000000/ pinctrl@300b000/ sdc0@3";
        sdc0_pins_e = "/ soc@3000000/ pinctrl@300b000/ sdc0@4";
        sdc1_pins_a = "/ soc@3000000/ pinctrl@300b000/ sdc1@0";
        sdc1_pins_b = "/ soc@3000000/ pinctrl@300b000/ sdc1@1";
        sdc2_pins_a = "/ soc@3000000/ pinctrl@300b000/ sdc2@0";
        sdc2_pins_b = "/ soc@3000000/ pinctrl@300b000/ sdc2@1";
        sdc2_pins_c = "/ soc@3000000/ pinctrl@300b000/ sdc2@2";
        nand0_pins_a = "/ soc@3000000/ pinctrl@300b000/ nand0@0";
        nand0_pins_b = "/ soc@3000000/ pinctrl@300b000/ nand0@1";
        nand0_pins_c = "/ soc@3000000/ pinctrl@300b000/ nand0@2";
        uart1_ph_pins = "/ soc@3000000/ pinctrl@300b000/ uart1-ph-pins";
        uart1_ph_sleep = "/ soc@3000000/ pinctrl@300b000/ uart1-ph-sleep";
        uart2_ph_pins = "/ soc@3000000/ pinctrl@300b000/ uart2-ph-pins";
        uart2_ph_sleep = "/ soc@3000000/ pinctrl@300b000/ uart2-ph-sleep";
        uart3_ph_pins = "/ soc@3000000/ pinctrl@300b000/ uart3-ph-pins";
        uart3_ph_sleep = "/ soc@3000000/ pinctrl@300b000/ uart3-ph-sleep";
        uart4_ph_pins = "/ soc@3000000/ pinctrl@300b000/ uart4-ph-pins";
        uart4_ph_sleep = "/ soc@3000000/ pinctrl@300b000/ uart4-ph-sleep";
        uart5_ph_pins = "/ soc@3000000/ pinctrl@300b000/ uart5-ph-pins";
        uart5_ph_sleep = "/ soc@3000000/ pinctrl@300b000/ uart5-ph-sleep";
        s_cir0_pins_a = "/ soc@3000000/ pinctrl@300b000/ s_cir0@0";
        s_cir0_pins_b = "/ soc@3000000/ pinctrl@300b000/ s_cir0@1";
        twi0_pins_a = "/ soc@3000000/ pinctrl@300b000/ twi0@0";
        twi0_pins_b = "/ soc@3000000/ pinctrl@300b000/ twi0@1";
        twi1_pins_a = "/ soc@3000000/ pinctrl@300b000/ twi1@0";
        twi1_pins_b = "/ soc@3000000/ pinctrl@300b000/ twi1@1";
        twi2_pins_a = "/ soc@3000000/ pinctrl@300b000/ twi2@0";
        twi2_pins_b = "/ soc@3000000/ pinctrl@300b000/ twi2@1";
        twi3_pins_a = "/ soc@3000000/ pinctrl@300b000/ twi3@0";
        twi3_pins_b = "/ soc@3000000/ pinctrl@300b000/ twi3@1";
        twi4_pins_a = "/ soc@3000000/ pinctrl@300b000/ twi4@0";
        twi4_pins_b = "/ soc@3000000/ pinctrl@300b000/ twi4@1";
        spi1_pins_a = "/ soc@3000000/ pinctrl@300b000/ spi1@0";
        spi1_pins_b = "/ soc@3000000/ pinctrl@300b000/ spi1@1";
        spi1_pins_c = "/ soc@3000000/ pinctrl@300b000/ spi1@2";
        gmac0_pins_a = "/ soc@3000000/ pinctrl@300b000/ gmac0@0";
        gmac0_pins_b = "/ soc@3000000/ pinctrl@300b000/ gmac0@1";
        gmac1_pins_a = "/ soc@3000000/ pinctrl@300b000/ gmac1@0";
        gmac1_pins_b = "/ soc@3000000/ pinctrl@300b000/ gmac1@1";
        pwm5_pin_a = "/ soc@3000000/ pinctrl@300b000/ pwm5@0";
        pwm5_pin_b = "/ soc@3000000/ pinctrl@300b000/ pwm5@1";
        spdif_pins_a = "/ soc@3000000/ pinctrl@300b000/ spdif@0";
        spdif_pins_b = "/ soc@3000000/ pinctrl@300b000/ spdif_sleep@0";
        ahub_daudio0_pins_a = "/ soc@3000000/ pinctrl@300b000/ ahub_daudio0@0";
        ahub_daudio0_pins_b = "/ soc@3000000/ pinctrl@300b000/ ahub_daudio0_sleep@0";
        ahub_daudio2_pins_a = "/ soc@3000000/ pinctrl@300b000/ ahub_daudio2@0";
        ahub_daudio2_pins_b = "/ soc@3000000/ pinctrl@300b000/ ahub_daudio2@1";
        ahub_daudio2_pins_c = "/ soc@3000000/ pinctrl@300b000/ ahub_daudio2@2";
        ahub_daudio2_pins_d = "/ soc@3000000/ pinctrl@300b000/ ahub_daudio2_sleep@0";
        ahub_daudio3_pins_a = "/ soc@3000000/ pinctrl@300b000/ ahub_daudio3@0";
        ahub_daudio3_pins_b = "/ soc@3000000/ pinctrl@300b000/ ahub_daudio3@1";
        ahub_daudio3_pins_c = "/ soc@3000000/ pinctrl@300b000/ ahub_daudio3@2";
        ahub_daudio3_pins_d = "/ soc@3000000/ pinctrl@300b000/ ahub_daudio3_sleep@0";
        r_pio = "/ soc@3000000/ pinctrl@7022000";
        s_twi0_pins_a = "/ soc@3000000/ pinctrl@7022000/ s_twi0@0";
        s_twi0_pins_b = "/ soc@3000000/ pinctrl@7022000/ s_twi0@1";
        mmu_aw = "/ soc@3000000/ iommu@30f0000";
        sdc2 = "/ soc@3000000/ sdmmc@4022000";
        sdc0 = "/ soc@3000000/ sdmmc@4020000";
        sdc1 = "/ soc@3000000/ sdmmc@4021000";
        nand0 = "/ soc@3000000/ nand0@4011000";
        mbus0 = "/ soc@3000000/ mbus-controller@47fa000";
        uart0 = "/ soc@3000000/ uart@5000000";
        uart1 = "/ soc@3000000/ uart@5000400";
        uart2 = "/ soc@3000000/ uart@5000800";
        uart3 = "/ soc@3000000/ uart@5000c00";
        uart4 = "/ soc@3000000/ uart@5001000";
        uart5 = "/ soc@3000000/ uart@5001400";
        twi0 = "/ soc@3000000/ twi@5002000";
        twi1 = "/ soc@3000000/ twi@5002400";
        twi2 = "/ soc@3000000/ twi@5002800";
        twi3 = "/ soc@3000000/ twi@5002c00";
        twi4 = "/ soc@3000000/ twi@5003000";
        twi5 = "/ soc@3000000/ twi@7081400";
        pmu0 = "/ soc@3000000/ twi@7081400/ pmu";
        standby_param = "/ soc@3000000/ twi@7081400/ pmu/ standby_param";
        reg_dcdc1 = "/ soc@3000000/ twi@7081400/ pmu/ regulators/ dcdc1";
        reg_dcdc2 = "/ soc@3000000/ twi@7081400/ pmu/ regulators/ dcdc2";
        reg_dcdc3 = "/ soc@3000000/ twi@7081400/ pmu/ regulators/ dcdc3";
        reg_aldo1 = "/ soc@3000000/ twi@7081400/ pmu/ regulators/ ldo1";
        reg_dldo1 = "/ soc@3000000/ twi@7081400/ pmu/ regulators/ ldo2";
        spi0 = "/ soc@3000000/ spi@5010000";
        spi1 = "/ soc@3000000/ spi@5011000";
        ths = "/ soc@3000000/ thermal-sensor@5070400";
        gpadc = "/ soc@3000000/ gpadc@5070000";
        keyboard = "/ soc@3000000/ keyboard@5070800";
        codec = "/ soc@3000000/ codec@5096000";
        codec_plat = "/ soc@3000000/ codec_plat";
        codec_mach = "/ soc@3000000/ codec_mach";
        spdif_plat = "/ soc@3000000/ spdif_plat@5093000";
        spdif_mach = "/ soc@3000000/ spdif_mach";
        ahub_dam_plat = "/ soc@3000000/ ahub_dam_plat@5097000";
        ahub_dam_mach = "/ soc@3000000/ ahub_dam_mach";
        ahub0_plat = "/ soc@3000000/ ahub0_plat";
        ahub1_plat = "/ soc@3000000/ ahub1_plat";
        ahub2_plat = "/ soc@3000000/ ahub2_plat";
        ahub3_plat = "/ soc@3000000/ ahub3_plat";
        ahub0_mach = "/ soc@3000000/ ahub0_mach";
        ahub0_cpu = "/ soc@3000000/ ahub0_mach/ soundcard-mach,cpu";
        ahub0_codec = "/ soc@3000000/ ahub0_mach/ soundcard-mach,codec";
        ahub1_mach = "/ soc@3000000/ ahub1_mach";
        ahub1_cpu = "/ soc@3000000/ ahub1_mach/ soundcard-mach,cpu";
        ahub1_codec = "/ soc@3000000/ ahub1_mach/ soundcard-mach,codec";
        ahub2_mach = "/ soc@3000000/ ahub2_mach";
        ahub2_cpu = "/ soc@3000000/ ahub2_mach/ soundcard-mach,cpu";
        ahub2_codec = "/ soc@3000000/ ahub2_mach/ soundcard-mach,codec";
        ahub3_mach = "/ soc@3000000/ ahub3_mach";
        ahub3_cpu = "/ soc@3000000/ ahub3_mach/ soundcard-mach,cpu";
        ahub3_codec = "/ soc@3000000/ ahub3_mach/ soundcard-mach,codec";
        spdif = "/ soc@3000000/ spdif@5094000";
        soundspdif = "/ soc@3000000/ soundspdif";
        dmic = "/ soc@3000000/ dmic@5095000";
        dmic_codec = "/ soc@3000000/ dmic_codec";
        sounddmic = "/ soc@3000000/ sounddmic";
        gpio_para = "/ soc@3000000/ gpio_para";
        gmac0 = "/ soc@3000000/ eth@5020000";
        gmac1 = "/ soc@3000000/ eth@5030000";
        usbc0 = "/ soc@3000000/ usbc0@0";
        udc = "/ soc@3000000/ udc-controller@5100000";
        ehci0 = "/ soc@3000000/ ehci0-controller@5101000";
        ohci0 = "/ soc@3000000/ ohci0-controller@5101400";
        usbc1 = "/ soc@3000000/ usbc1@0";
        ehci1 = "/ soc@3000000/ ehci1-controller@5200000";
        ohci1 = "/ soc@3000000/ ohci1-controller@5200400";
        usbc2 = "/ soc@3000000/ usbc2@0";
        ehci2 = "/ soc@3000000/ ehci2-controller@5310000";
        ohci2 = "/ soc@3000000/ ohci2-controller@5310400";
        usbc3 = "/ soc@3000000/ usbc3@0";
        ehci3 = "/ soc@3000000/ ehci3-controller@5311000";
        ohci3 = "/ soc@3000000/ ohci3-controller@5311400";
        hdmi = "/ soc@3000000/ hdmi@6000000";
        nmi_intc = "/ soc@3000000/ interrupt-controller@7010320";
        s_cir0 = "/ soc@3000000/ s_cir@7040000";
        rfkill = "/ soc@3000000/ rfkill";
        wlan = "/ soc@3000000/ rfkill/ wlan";
        bt = "/ soc@3000000/ rfkill/ bt";
        addr_mgt = "/ soc@3000000/ addr_mgt";
        btlpm = "/ soc@3000000/ btlpm";
        clk_pll_video2 = "/ soc@3000000/ pll_video2";
        clk_pll_de = "/ soc@3000000/ pll_de";
        clk_de = "/ soc@3000000/ de";
        clk_display_top = "/ soc@3000000/ display_top";
        clk_tcon_lcd = "/ soc@3000000/ tcon_lcd";
        clk_tcon_lcd1 = "/ soc@3000000/ tcon_lcd1";
        clk_tcon_tv = "/ soc@3000000/ tcon_tv";
        clk_tcon_tv1 = "/ soc@3000000/ tcon_tv1";
        clk_lvds = "/ soc@3000000/ lvds";
        clk_hdmi = "/ soc@3000000/ hdmi";
        clk_hdmi_slow = "/ soc@3000000/ hdmi_slow";
        clk_hdmi_cec = "/ soc@3000000/ hdmi_cec";
        clk_hdmi_hdcp = "/ soc@3000000/ hdmi_hdcp";
        clk_pll_periph1 = "/ soc@3000000/ pll_periph1";
        uboot_disp = "/ uboot_disp@1000000";
        uboot_hdmi = "/ uboot_hdmi@6000000";
        cpu_trips = "/ thermal-zones/ cpu_thermal_zone/ trips";
        cpu_threshold = "/ thermal-zones/ cpu_thermal_zone/ trips/ trip-point@0";
        cpu_target = "/ thermal-zones/ cpu_thermal_zone/ trips/ trip-point@1";
        cpu_crit = "/ thermal-zones/ cpu_thermal_zone/ trips/ cpu_crit@0";
        usb0_drvvbus = "/ usb0-drvvvbus";
        };
      };
    =>
      Обзор     Корпус     Элементы     Порты     ENV       FDT